Unconventional Mn Vacancies in Mn–Fe Prussian Blue Analogs: Suppressing Jahn-Teller Distortion for Ultrastable Sodium Storage

Coordination engineering for iron-based hexacyanoferrate as a high-stability cathode for sodium-ion batteries

Iron-based hexacyanoferrate (Fe-HCF) are promising cathode materials for sodium-ion batteries (SIBs) due to their unique open-channel structure that facilitates fast ion transport and framework stability. However, practical implementation of SIBs has been hindered by low initial Coulombic efficiency (ICE), poor rate performance, and short lifespan. Herein, we report a coordination engineering to synthesize sodium-rich Fe-HCF as cathodes for SIBs through a uniquely designed 10-kg-scale chemical reactor. Our study systematically investigated the relationship between coordination surroundings and the electrochemical behavior. Building on this understanding, the cathode delivered a reversible capacity of 99.3 mAh g-1 at 5 C (1 C = 100 mA g-1), exceptional rate capability (51 mAh g-1 even at 100 C), long lifespan (over 15,000 times at 50 C), and a high ICE of 92.7%. A full cell comprising the Fe-HCF cathode and hard carbon (HC) anode exhibited an impressive cyclic stability with a high-capacity retention rate of 98.3% over 1,000 cycles. Meanwhile, this material can be readily scaled to the practical levels of yield. The findings underscore the potential of Fe-HCF as cathodes for SIBs and highlight the significance of controlling nucleation and morphology through coordination engineering for a sustainable energy storage system.

Structural Engineering of Prussian Blue Analogues Enabling All-Climate and Ultralong Cycling Sodium-Ion Batteries

The development of cost-efficient, long-lifespan, and all-climate sodium-ion batteries is of great importance for advancing large-scale energy storage but is plagued by the lack of suitable cathode materials. Here, we report low-cost Na-rich Mn-based Prussian blue analogues with superior rate capability and ultralong cycling stability over 10,000 cycles via structural optimization with electrochemically inert Ni atoms. Their thermal stability, all-climate properties, and potential in full cells are investigated in detail. Multiple in situ characterizations reveal that the outstanding performances benefit from their highly reversible three-phase transformations and trimetal (Mn-Ni-Fe) synergistic effects. In addition, a high sodium diffusion coefficient and a low volume distortion of 2.3% are observed through in situ transmission electron microscopy and first-principles calculations. Our results provide insights into the structural engineering of Prussian blue analogues for advanced sodium-ion batteries in large-scale energy storage applications.

Highly Crystalline Multivariate Prussian Blue Analogs via Equilibrium Chelation Strategy for Stable and Fast Charging Sodium-Ion Batteries

Prussian blue analogs (PBAs) have been widely recognized as superior cathode materials for sodium-ion batteries (SIBs) owing to numerous merits. However, originating from the rapid crystal growth, PBAs still suffer from considerable vacancy defects and interstitial water, making the preparation of long-cycle-life PBAs the greatest challenge for its practical application. Herein, a novel equilibrium chelation strategy is first proposed to synthesize a high crystallinity (94.7%) PBAs, which is realized by modulating the chelating potency of strong chelating agents via "acid effect" to achieve a moderate chelating effect, forcefully breaking through the bottleneck of poor cyclic stability for PBAs cathodes. Impressively, the as-prepared highly crystalline PBAs represent an unprecedented level of electrochemical performance including ultra-long lifespan (10000 cycles with 86.32% capacity maintenance at 6 A g-1), excellent rate capability (82.0 mAh g-1 at 6 A g-1). Meanwhile, by pairing with commercial hard carbon, the as-prepared PBAs-based SIBs exhibit high energy density (350 Wh kg-1) and excellent capacity retention (82.4% after 1500 cycles), highlighting its promising potential for large-scale energy storage applications.

Entropy Engineering Constrain Phase Transitions Enable Ultralong-life Prussian Blue Analogs Cathodes

Prussian blue analogs (PBAs) are considered as one of the most potential electrode materials in capacitive deionization (CDI) due to their unique 3D framework structure. However, their practical applications suffer from low desalination capacity and poor cyclic stability. Here, an entropy engineering strategy is proposed that incorporates high-entropy (HE) concept into PBAs to address the unfavorable multistage phase transitions during CDI desalination. By introducing five or more metals, which share N coordination site, high-entropy hexacyanoferrate (HE-HCF) is constructed, thereby increasing the configurational entropy of the system to above 1.5R and placing it into the high-entropy category. As a result, the developed HE-HCF demonstrates remarkable cycling performance, with a capacity retention rate of over 97% after undergoing 350 ultralong-life cycles of adsorption/desorption. Additionally, it exhibits a high desalination capacity of 77.24 mg g-1 at 1.2 V. Structural characterization and theoretical calculation reveal that high configurational entropy not only helps to restrain phase transition and strengthen structural stability, but also optimizes Na+ ions diffusion path and energy barrier, accelerates reaction kinetics and thus improves performance. This research introduces a new approach for designing electrodes with high performance, low cost, and long-lasting durability for capacitive deionization applications.

Advancements in Manganese-Based Cathode for Sustainable Energy Utilization

Manganese-based compounds, especially manganese oxides, are one of the most exceptional electrode materials. Specifically, manganese oxides have gained significant interest owing to their unique crystal structures, high theoretical capacity, abundant natural availability and eco-friendly nature. However, as transition metal semiconductors, manganese oxide possess low electrical conductivity, limited rate capacity, and suboptical cycle stability. Thus, combining manganese oxides with carbon or other metallic materials can significantly improve their electrochemical performance. These composites increase active sites and conductivity, thereby improving electrode reaction kinetics, cycle stability, and lifespan of supercapacitors (SCs) and batteries. This paper reviews the latest applications of Mn-based cathodes in SCs and advanced batteries. Moreover, the energy storage mechanisms were also proposed. In this review, the development prospects and challenges for advanced energy storage applications of Mn-based cathodes are summarized.

Cation/Anion-Dual regulation in Na3MnTi(PO4)3 cathode achieves the enhanced electrochemical properties of Sodium-Ion batteries

Na3MnTi(PO4)3 (NMTP) emerges as a promising cathode material with high-performance for sodium-ion batteries (SIBs). Nevertheless, its development has been limited by several challenges, including poor electronic conductivity, the Mn3+ Jahn-Teller effect, and the presence of a Na+/Mn2+ cation mixture. To address these issues, we have developed a cation/anion-dual regulation strategy to activate the redox reactions involving manganese, thereby significantly enhancing the performance of NMTP. This strategy simultaneously enhances the structural dynamics and facilitates rapid ion transport at high rates by inducing the formation of sodium vacancy. The combined effects of these modifications lead to a substantial improvement in specific capacity (79.1 mAh/g), outstanding high-rate capabilities (35.9 mAh/g at 10C), and an ultralong cycle life (only 0.040 % capacity attenuation per cycle over 250 cycles at 1C for Na3.34Mn1.2Ti0.8(PO3.98F0.02)3) when used as a cathode material in SIBs. Furthermore, its performance in full cell demonstrates impressive rate capability (44.4 mAh/g at 5C) and exceptional cycling stability (with only 0.116 % capacity decay per cycle after 150 cycles at 1C), suggesting its potential for practical applications. This work presents a dual regulation strategy targeting different sites, offering a significant advancement in the development of NASICON phosphate cathodes for SIBs.

Self-Sustained-Release Strategy Realizes Colloid Oriented Assembly to Fabricate Prussian Blue with Hierarchical Structure

The controlled self-assembly of nanomaterials has been a great challenge in nanosynthesis, especially for hierarchical architectures with high complexity. Particularly, the structural design of Prussian blue (PB) series materials with robustness and fast nucleation is even more difficult. Herein, a self-sustained-release strategy based on the slow release of metal ions from coordination ions is proposed to guide the assembly of PB crystals. The key to this strategy is the slow release by ligand, which can create ultra-low concentrations of metal ions so as to provide the possibility to realize the surface charge manipulation of PB primary colloids. By adding electrolyte or changing the polarity of the solution, the surface charge regulation of PB colloid is realized, and the PB hierarchical structures with branch fractal structure (PB-BS), octahedral fractal structure, and spherical fractal structure are effectively constructed. This work not only achieves the designability of the PB structure, but also synchronizes the functionalization during the PB assembly growth process by in situ encapsulation of the effective catalytic active component L-Ascorbic acid. As a result, the assembled PB-BS exhibits greatly enhanced catalytic activity and selectivity in styrene oxidation with the selectivity of oxidized styrene increasing from 35.6% (PB) to 80.5% (PB-BS).

Anion-Cation Competition Chemistry for Comprehensive High-Performance Prussian Blue Analogs Cathodes

The extensively studied Prussian blue analogs (PBAs) in various batteries are limited by their low discharge capacity, or subpar rate etc., which are solely reliant on the cation (de)intercalation mechanism. In contrast to the currently predominant focus on cations, we report the overlooked anion-cation competition chemistry (Cl-, K+, Zn2+) stimulated by high-voltage scanning. With our designed anion-cation combinations, the KFeMnHCF cathode battery delivers comprehensively superior discharge performance, including voltage plateau >2.0 V (vs. Zn/Zn2+), capacity >150 mAh g-1, rate capability with capacity maintenance above 96 % from 0.6 to 5 A g-1, and cyclic stability exceeding 3000 cycles. We further verify that such comprehensive improvement of electrochemical performance utilizing anion-cation competition chemistry is universal for different types of PBAs. Our work would pave a new and efficient road towards the next-generation high-performance PBAs cathode batteries.

Hollow Stair-Stepping Spherical High-Entropy Prussian Blue Analogue for High-Rate Sodium Ion Batteries

Prussian blue analogues (PBAs) are considered to be one of the most suitable sodium storage materials, especially with the introduction of the high-entropy (HE) concept into their structure to further improve their various abilities. However, severe agglomeration of the HEPBA particles still limits the fast charging capabilities. Here, an HEPBA (Nax(FeMnCoNiCu)[Fe(CN)6]y□1-y·nH2O) with a hollow stair-stepping spherical structure has been prepared through the chemical etching process of the traditional cubic structure of HEPBA. Electrochemical characterization (sodium ion battery), kinetic analysis, and COMSOL Multiphysics simulations reveal that the nature of the high-entropy and the hollow stair-stepping spherical structure can greatly improve the diffusion behavior of Na+ ions. Moreover, the hollow structure effectively mitigates the volume change of HEPBA during SIBs operation, ultimately extending the lifespan. Consequently, the as-prepared HEPBA cathode exhibits excellent rate performance (126.5 and 76.4 mAh g-1 at 0.1 and 4.0 A g-1, respectively) and stable long-term capability (maintaining its 75.6% capacity after 1000 cycles) due to its unique structure. Furthermore, the waste of the etching process can easily be recycled to prepare more HEPBA product. This processing method holds great promise for designing nanostructures of advanced high-entropy Prussian blue analogues for sodium ion batteries.

MnFe Prussian Blue Analogue Open Cages for Sodium-Ion Batteries: Simultaneous Evolution of Structure, Morphology, and Energy Storage Properties

Prussian blue analogues (PBAs) exhibiting hollow morphologies have garnered considerable attention owing to their remarkable electrochemical properties. In this study, a one-pot strategy is proposed for the synthesis of MnFe PBA open cages. The materials are subsequently employed as cathode electrode in sodium-ion batteries (SIBs). The simultaneous evolution of structure, morphology, and performance during the synthesis process is investigated. The findings reveal substantial structural modifications as the reaction time is prolonged. The manganese content in the samples diminishes considerably, while the potassium content experiences an increase. This compositional variation is accompanied by a significant change in the spin state of the transition metal ions. These structural transformations trigger the occurrence of the Kirkendall effect and Oswald ripening, culminating in a profound alteration of the morphology of MnFe PBA. Moreover, the shifts in spin states give rise to distinct changes in their charge-discharge profiles and redox potentials. Furthermore, an exploration of the formation conditions of the samples and their variations before and after cycling is conducted. This study offers valuable insights into the intricate relationship between the structure, morphology, and electrochemical performance of MnFe PBA, paving the way for further optimizations in this promising class of materials for energy storage applications.

Prussian Blue Analogues for Sodium-Ion Battery Cathodes: A Review of Mechanistic Insights, Current Challenges, and Future Pathways

Prussian blue analogues (PBAs) have emerged as highly promising cathode materials for sodium-ion batteries (SIBs) due to their affordability, facile synthesis, porous framework, and high theoretical capacity. Despite their considerable potential, practical applications of PBAs face significant challenges that limit their performance. This review offers a comprehensive retrospective analysis of PBAs' development history as cathode materials, delving into their reaction mechanisms, including charge compensation and ion diffusion mechanisms. Furthermore, to overcome these challenges, a range of improvement strategies are proposed, encompassing modifications in synthesis techniques and enhancements in structural stability. Finally, the commercial viability of PBAs is examined, alongside discussions on advanced synthesis methods and existing concerns regarding cost and safety, aiming to foster ongoing advancements of PBAs for practical SIBs.

Progress and perspectives on iron-based electrode materials for alkali metal-ion batteries: a critical review

Iron-based materials with significant physicochemical properties, including high theoretical capacity, low cost and mechanical and thermal stability, have attracted research attention as electrode materials for alkali metal-ion batteries (AMIBs). However, practical implementation of some iron-based materials is impeded by their poor conductivity, large volume change, and irreversible phase transition during electrochemical reactions. In this review we critically assess advances in the chemical synthesis and structural design, together with modification strategies, of iron-based compounds for AMIBs, to obviate these issues. We assess and categorize structural and compositional regulation and its effects on the working mechanisms and electrochemical performances of AMIBs. We establish insight into their applications and determine practical challenges in their development. We provide perspectives on future directions and likely outcomes. We conclude that for boosted electrochemical performance there is a need for better design of structures and compositions to increase ionic/electronic conductivity and the contact area between active materials and electrolytes and to obviate the large volume change and low conductivity. Findings will be of interest and benefit to researchers and manufacturers for sustainable development of advanced rechargeable ion batteries using iron-based electrode materials.

Electrochemical coupling in subnanometer pores/channels for rechargeable batteries

Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.

Hollow Layered Iron-Based Prussian Blue Cathode with Reduced Defects for High-Performance Sodium-Ion Batteries

Fe-based Prussian blue (Fe-PB) analogues have emerged as promising cathode materials for sodium-ion batteries, owing to their cost-effectiveness, high theoretical capacity, and environmental friendliness. However, their practical application is hindered by [Fe(CN)6] defects, negatively impacting capacity and cycle stability. This work reports a hollow layered Fe-PB composite material using 1,3,5-benzenetricarboxylic acid (BTA) as a chelating and etching agent by the hydrothermal method. Compared to benzoic acid, our approach significantly reduces defects and enhances the yield of Fe-PB. Notably, the hollow layered structure shortens the diffusion path of sodium ions, enhances the activity of low-spin Fe in the Fe-PB lattice, and mitigates volume changes during Na-ion insertion/extraction into/from Fe-PB. As a sodium-ion battery cathode, this hollow layered Fe-PB exhibits an impressive initial capacity of 95.9 mAh g-1 at a high current density of 1 A g-1. Even after 500 cycles, it still maintains a considerable discharge capacity of 73.1 mAh g-1, showing a significantly lower capacity decay rate (0.048%) compared to the control sample (0.089%). Moreover, the full cell with BTA-PB-1.6 as the cathode and HC as the anode provides a considerable energy density of 312.2 Wh kg-1 at a power density of 291.0 W kg-1. This research not only enhances the Na storage performance of Fe-PB but also increases the yield of products obtained by hydrothermal methods, providing some technical reference for the production of PB materials using the low-yield hydrothermal method.

In situ electrochemical Mn vacancies in CoMnHCF for a high level of zinc storage

CoMnHCF is utilized in aqueous sodium/zinc mixed ion batteries and exhibits a high reversible capacity with good rate and cycle performances. At 0.05 A g-1 current density, the CoMnHCF can deliver a specific capacity for 180.4 mA h g-1, and have 99.3% capacity retention after 300 cycles at 0.3 A g-1. Such high reversible capacity profits from Mn vacancies that generate in situ during the first cycle, which provides more active sites for Zn storage. The de-intercalation of Na+ further elevates this good electrochemical performance. Co atoms in the framework are not only involved in the redox reactions, but help to support the structure, thus achieving better cycle stabilities.

Air-Stable Prussian White Cathode Materials for Sodium-Ion Batteries Enabled by ZnO Surface Modification

Iron-based Prussian white (PW) is one of the promising cathodes for sodium-ion batteries, owing to its high capacity and low cost. However, the practical application of PW is hindered by its poor air stability. The metal-oxide coating has been proven to be an effective way to improve the air stability of electrode materials. Whereas, the target electrode materials conventionally need to be dissolved in the aqueous solution to obtain precursor composites and subsequently calcined at a high temperature during the metal-oxide coating process, which could destroy the phase structure of PW as a result of the sodium leaching into the water and thermal decomposition at the high temperature. In this work, we propose a facile method to construct a ZnO surface layer on PW by utilizing ethanol as a solvent and a mild post-treatment temperature. The ZnO coating layer effectively enhances the air stability of PW and induces the formation of the stable interface on PW. The PW-5 wt % ZnO-E (exposed in 60% humidity air after 30 days) cathode demonstrates a much higher capacity retention (94.1%) at 1 C after 200 cycles than that of PW-E (54%). This work lays a solid foundation for further application of PW.

Interior-Confined Vacancy in Potassium Manganese Hexacyanoferrate for Ultra-Stable Potassium-Ion Batteries

Metal hexacyanoferrates (HCFs) are viewed as promising cathode materials for potassium-ion batteries (PIBs) because of their high theoretical capacities and redox potentials. However, the development of an HCF cathode with high cycling stability and voltage retention is still impeded by the unavoidable Fe(CN)6 vacancies (VFeCN) and H2O in the materials. Here, a repair method is proposed that significantly reduces the VFeCN content in potassium manganese hexacyanoferrate (KMHCF) enabled by the reducibility of sodium citrate and removal of ligand H2O at high temperature (KMHCF-H). The KMHCF-H obtained at 90 °C contains only 2% VFeCN, and the VFeCN is concentrated in the lattice interior. Such an integrated Fe-CN-Mn surface structure of the KMHCF-H cathode with repaired surface VFeCN allows preferential decomposition of potassium bis(fluorosulfonyl)imide (KFSI) in the electrolyte, which constitutes a dense anion-dominated cathode electrolyte interphase (CEI) , inhibiting effectively Mn dissolution into the electrolyte. Consequently, the KMHCF-H cathode exhibits excellent cycling performance for both half-cell (95.2 % at 0.2 Ag-1 after 2000 cycles) and full-cell (99.4 % at 0.1 Ag-1 after 200 cycles). This thermal repair method enables scalable preparation of KMHCF with a low content of vacancies, holding substantial promise for practical applications of PIBs.

Defect-Free Prussian Blue Analogue as Zero-Strain Cathode Material for High-Energy-Density Potassium-Ion Batteries

Prussian blue analogues (PBAs) have been widely studied as cathodes for potassium-ion batteries (PIBs) due to their three-dimensional framework structure and easily adjustable composition. However, the phase transition behavior and [Fe(CN)6]4- anionic defects severely deteriorate electrochemical performances. Herein, we propose a defect-free potassium iron manganese hexacyanoferrate (K1.47Fe0.5Mn0.5[Fe(CN)6]·1.26H2O, KFMHCF-1/2) as the cathode material for PIBs. The Fe-Mn binary synergistic and defect-free effects can inhibit the cell volume change and octahedral slip during the K-ion insertion/extraction process, so that the phase transformation behavior (monoclinic ↔ cubic) is effectively inhibited, achieving a zero-strain solid solution mechanism employing Fe and Mn as dual active-sites. Thus, KFMHCF-1/2 contributes the highest initial capacity of 155.3 mAh·g-1 with an energy density of 599.5 Wh·kg-1 at 10 mA·g-1 among the reported PBA cathodes, superior rate capability, and cyclic stability over 450 cycles. The assembled K-ion full battery using K deposited on graphite (K@G) as anode also delivers high reversible specific capacity of 131.1 mAh·g-1 at 20 mA·g-1 and ultralong lifespans over 1000 cycles at 50 mA·g-1 with the lowest capacity decay rate of 0.044% per cycle. This work will promote the rapid application of high-energy-density PIBs.

Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries

Aqueous sodium-ion batteries (ASIBs) and aqueous potassium-ion batteries (APIBs) present significant potential for large-scale energy storage due to their cost-effectiveness, safety, and environmental compatibility. Nonetheless, the intricate energy storage mechanisms in aqueous electrolytes place stringent requirements on the host materials. Prussian blue analogs (PBAs), with their open three-dimensional framework and facile synthesis, stand out as leading candidates for aqueous energy storage. However, PBAs possess a swift capacity fade and limited cycle longevity, for their structural integrity is compromised by the pronounced dissolution of transition metal (TM) ions in the aqueous milieu. This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs. The dissolution mechanisms of TM ions in PBAs, informed by their structural attributes and redox processes, are thoroughly examined. Moreover, this study delves into innovative design tactics to alleviate the dissolution issue of TM ions. In conclusion, the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.

Entropy-Mediated Stable Structural Evolution of Prussian White Cathodes for Long-Life Na-Ion Batteries

The high-entropy approach is applied to monoclinic Prussian White (PW) Na-ion cathodes to address the issue of unfavorable multilevel phase transitions upon electrochemical cycling, leading to poor stability and capacity decay. A series of Mn-based samples with up to six metal species sharing the N-coordinated positions was synthesized. The material of composition Na1.65 Mn0.4 Fe0.12 Ni0.12 Cu0.12 Co0.12 Cd0.12 [Fe(CN)6 ]0.92 □0.08  ⋅ 1.09H2 O was found to exhibit superior cyclability over medium/low-entropy and conventional single-metal PWs. We also report, to our knowledge for the first time, that a high-symmetry crystal structure may be advantageous for high-entropy PWs during battery operation. Computational comparisons of the formation enthalpy demonstrate that the compositionally less complex materials are prone to phase transitions, which negatively affect cycling performance. Based on data from complementary characterization techniques, an intrinsic mechanism for the stability improvement of the disordered PW structure upon Na+ insertion/extraction is proposed, namely the dual effect of suppression of phase transitions and mitigation of gas evolution.

Boosting Manganese Selenide Anode for Superior Sodium-Ion Storage via Triggering α → β Phase Transition

Sodium-ion batteries (SIBs) have been extensively studied owing to the abundance and low-price of Na resources. However, the infeasibility of graphite and silicon electrodes in sodium-ion storage makes it urgent to develop high-performance anode materials. Herein, α-MnSe nanorods derived from δ-MnO2 (δ-α-MnSe) are constructed as anodes for SIBs. It is verified that α-MnSe will be transferred into β-MnSe after the initial Na-ion insertion/extraction, and δ-α-MnSe undergoes typical conversion mechanism using a Mn-ion for charge compensation in the subsequent charge-discharge process. First-principles calculations support that Na-ion migration in defect-free α-MnSe can drive the lattice distortion to phase transition (alpha → beta) in thermodynamics and dynamics. The formed β-MnSe with robust lattice structure and small Na-ion diffusion barrier boosts great structure stability and electrochemical kinetics. Hence, the δ-α-MnSe electrode contributes excellent rate capability and superior cyclic stability with long lifespan over 1000 cycles and low decay rate of 0.0267% per cycle. Na-ion full batteries with a high energy density of 281.2 Wh·kg-1 and outstanding cyclability demonstrate the applicability of δ-α-MnSe anode.

Effect of the Interaction between Transition Metal Redox Center and Cyanide Ligand on Structural Evolution in Prussian White Cathodes

Transition metal (TM) based Prussian whites, comprising a cyanide anion ((C≡N)-) and TM cations in an alternative manner, have been widely adopted as cathode materials for rechargeable batteries. Prussian whites are characterized by the TM electronic states that exclusively adopt low spin (LS) toward the C atom and high spin (HS) toward the N atom through the hybridized covalent bonding in the TM─C≡N─TM unit with the average oxidation states of the TM ions being 2+, considerably affecting the phase transition behavior upon the release and storage of carrier ions; however, there have been only a few studies on their associated features. Herein, Prussian whites with different HS TM ions were synthesized via coprecipitation and the phase transition behavior controlled by the π electron interaction between the cyanide anions and TM ions during battery operations was investigated. In situ X-ray characterizations reveal that the combined effect of π backdonation in the LS Fe-C unit and π donation in the HS TM-N unit effectively controls the bond length of the TM─C≡N─TM building unit, thus markedly influencing the lattice volume of a series of Prussian white cathodes during the charge/discharge process. This study presents a comprehensive understanding of the structure-property relationship of the Prussian white cathodes involving π electron interactions during battery operations.

In Situ Growth of Sodium Manganese Hexacyanoferrate on Carbon Nanotubes for High-Performance Sodium-Ion Batteries

Sodium manganese hexacyanoferrate (NaMnHCF) has emerged as a research hotspot among Prussian blue analogs for sodium-ion battery cathode materials due to its advantages of high voltage, high specific capacity, and abundant raw materials. However, its practical application is limited by its poor electronic conductivity. In this study, we aim to solve this problem through the in situ growth of NaMnHCF on carbon nanotubes (CNTs) using a simple coprecipitation method. The results show that the overall electronic conductivity of NaMnHCF is significantly improved after the introduction of CNTs. The NaMnHCF@10%CNT sample presents a specific capacity of 90 mA h g-1, even at a current density of 20 C (2400 mA g-1). The study shows that the optimized composite exhibits a superior electrochemical performance at different mass loadings (from low to high), which is attributed to the enhanced electron transport and shortened electron pathway. Surprisingly, the cycling performance of the composites was also improved, resulting from decreased polarization and the subsequent reduction in the side reactions at the cathode/electrolyte interface. Furthermore, we revealed the evolution of potential plateau roots from the extraction of crystal water during the charge-discharge process of NaMnHCF based on the experimental results. This study is instructive not only for the practical application of NaMnHCF materials but also for advancing our scientific understanding of the behavior of crystal water during the charge-discharge process.

Design of bifunctional ultrathin MnO2 nanofilm with laccase-like activity for sensing environmental pollutants containing phenol groups

Laccase-catalyzed oxidative reactions are increasingly examined as a reliable approach to environmental analysis and remediation, and it is urgent to widen metal category to compensate huge gap in the number of studies on copper- and non-copper laccase mimics. Herein, two-dimensional ultrathin MnO2 nanofilm (Mn-uNF) was designed via a chemical deposition and alkali etching process. Similar to Cu-laccase, Mn-uNF can oxidize phenols via a one-electron-transfer reaction of Mn(III) and accelerate the MnIII/MnIV state cycle through an unconventional oxygen reduction process. The excellent laccase-like performance of Mn-uNF can be ascribed to the abundant atomically dispersed Vo-assisted Mn(III) and surface -OH species, which was confirmed by characterizations and DFT calculation. Further, a facile dual-function colorimetric platform was designed for array sensing of o-, m-, and p-dihydroxybenzene isomers and one-step discrimination of tetracyclines containing phenol groups. These findings provide reasonable guidance for the design of a nanozyme with active Mn sites as a new family member of highly efficient copper-free laccase mimics.

Promising Cathode Materials for Sodium-Ion Batteries from Lab to Application

Sodium-ion batteries (SIBs) are seen as an emerging force for future large-scale energy storage due to their cost-effective nature and high safety. Compared with lithium-ion batteries (LIBs), the energy density of SIBs is insufficient at present. Thus, the development of high-energy SIBs for realizing large-scale energy storage is extremely vital. The key factor determining the energy density in SIBs is the selection of cathodic materials, and the mainstream cathodic materials nowadays include transition metal oxides, polyanionic compounds, and Prussian blue analogs (PBAs). The cathodic materials would greatly improve after targeted modulations that eliminate their shortcomings and step from the laboratory to practical applications. Before that, some remaining challenges in the application of cathode materials for large-scale energy storage SIBs need to be addressed, which are summarized at the end of this Outlook.

Pre-intercalation of Ammonium Ions in Layered δ-MnO2 Nanosheets for High-Performance Aqueous Zinc-Ion Batteries

Layered manganese dioxide is a promising cathode candidate for aqueous Zn-ion batteries. However, the narrow interlayer spacing, inferior intrinsic electronic conductivity and poor structural stability still limit its practical application. Herein, we report a two-step strategy to incorporate ammonium ions into manganese dioxide (named as AMO) nanosheets as a cathode for boosted Zn ion storage. K+ -intercalated δ-MnO2 nanosheets (KMO) grown on carbon cloth are chosen as the self-involved precursor. Of note, ammonium ions could replace K+ ions via a facile hydrothermal reaction to enlarge the lattice space and form hydrogen-bond networks. Compared with KMO, the structural stability and the ion transfer kinetics of the layered AMO are enhanced. As expected, the obtained AMO cathode exhibits remarkable electrochemical properties in terms of high reversible capacity, decent rate performance and superior cycling stability over 10000 cycles.

Preparation of Low-Defect Manganese-Based Prussian Blue Cathode Materials with Cubic Structure for Sodium-Ion Batteries via Coprecipitation Method

Sodium-ion batteries have important application prospects in large-scale energy storage due to their advantages, such as safety, affordability, and abundant resources. Prussian blue analogs (PBAs) have a stable and open framework structure, making them a very promising cathode material. However, high-performance manganese-based Prussian blue cathode materials for sodium-ion batteries still suffer from significant challenges due to several key issues, such as a high number of vacancy defects and a high crystal water content. This article investigates the effects of the Fe-Mn molar ratio, Mn ion concentration, and reaction time on the electrochemical performance of MnHCF during the coprecipitation process. When Fe:Mn = 1:2, c(Mn2+) = 0.02 mol/L, and the reaction time is 12 h, the content of interstitial water molecules in the sample is low, and the Fe(CN)6 defects are few. At 0.1 C, the prepared electrode has a high initial discharge specific capacity (121.9 mAh g-1), and after 100 cycles at 0.2 C, the capacity retention rate is 65% (~76.2 mAh g-1). Meanwhile, the sample electrode exhibits excellent reversibility. The discharge capacity can still be maintained at around 75% when the magnification is restored from 5 C to 0.1 C. The improvement in performance is mainly attributed to two aspects: On the one hand, reducing the Fe(CN)6 defects and crystal water content is conducive to the diffusion and stable structure of N. On the other hand, reducing the reaction rate can significantly delay the crystallization of materials and optimize the nucleation process.

Self-template sacrifice and in situ oxidation of a constructed hollow MnO2 nanozymes for smartphone-assisted colorimetric detection of liver function biomarkers

Liver function tests play a vital role in accurately diagnosing liver diseases, monitoring treatment outcomes, and assessing liver damage severity. Here, we introduce a novel approach to develop a smartphone-assisted portable colorimetric sensor for rapid detection of three liver function biomarkers: aspartate aminotransferase (AST), alanine aminotransferase (ALT), and alkaline phosphatase (ALP). This sensor is based on the inherent enzyme-like activities of hollow MnO2 (H-MnO2). The H-MnO2 is synthesized via a self-template sacrifice and in situ oxidation strategy, utilizing a manganese-based Prussian blue analogue (Mn-PBA) as a sacrificial template. The resulting H-MnO2 exhibits a polycrystalline structure with a large specific surface area. By encapsulating the H-MnO2 in sodium alginate, we construct a portable sensing platform facilitating specific and rapid colorimetric detection of the three liver function biomarkers with the assistance of a smartphone. The developed sensor demonstrates outstanding sensitivity and stability, achieving detection limits of 4.9 U L-1, 3.6 U L-1, and 0.99 U L-1 for AST, ALT, and ALP, respectively. Importantly, this work introduces an innovative in situ oxidation method for fabricating hollow nanozymes, offering a cost-effective and convenient assay for liver function biomarkers detection.

Isostructural Synthesis of Iron-Based Prussian Blue Analogs for Sodium-Ion Batteries

Rechargeable sodium ion batteries (SIBs) have promising applications in large-scale energy storage systems. Iron-based Prussian blue analogs (PBAs) are considered as potential cathodes owing to their rigid open framework, low-cost, and simple synthesis. However, it is still a challenge to increase the sodium content in the structure of PBAs and thus suppress the generation of defects in the structure. Herein, a series of isostructural PBAs samples are synthesized and the isostructural evolution of PBAs from cubic to monoclinic after modifying the conditions is witnessed. Accompanied by, the increased sodium content and crystallinity are discovered in PBAs structure. The as-obtained sodium iron hexacyanoferrate (Na1.75 Fe[Fe(CN)6 ]0.9743 ·2.76H2 O) exhibits high charge capacity of 150 mAh g-1 at 0.1 C (17 mA g-1 ) and excellent rate performance (74 mAh g-1 at 50 C (8500 mA g-1 )). Moreover, their highly reversible Na+ ions intercalation/de-intercalation mechanism is verified by in situ Raman and Powder X-ray diffraction (PXRD) techniques. More importantly, the Na1.75 Fe[Fe(CN)6 ]0.9743 ·2.76H2 O sample can be directly assembled in a full cell with hard carbon (HC) anode and shows excellent electrochemical performances. Finally, the relationship between PBAs structure and electrochemical performance is summarized and prospected.

The Pillar Effect of Large-Size Alkaline Ions on the Electrochemical Stability of Sodium Manganese Hexacyanoferrate for Sodium-Ion Batteries

Sodium manganese hexacyanoferrate (NaMnHCF) is an attractive candidate as a cathode material for sodium-ion batteries due to its low cost and high energy density. However, its practical application is hindered by poor electrochemical stability caused by the Jahn-Teller effect of Mn and the unstable structure of NaMnHCF. Here, this paper aims to address this issue by introducing highly stable AMnHCF (where A = K, Rb, or Cs) through a facile method to composite with NaMnHCF. The findings reveal that all AMnHCFs have a "pillar effect" on the crystal structure of NaMnHCF. It is observed that the degree of pillar effect varies depending on the specific AMnHCF used. The less electrochemically inactive the alkaline ion is and the greater the degree of compositing with NaMnHCF, the more dramatic the pillar effect. KMnHCF shows limited pillar effect due to its rough composition with NaMnHCF and the loss of K+ upon (de)intercalation. RbMnHCF has lower electrochemical activity and can be better composited with NaMnHCF. On the other hand, CsMnHCF exhibits the strongest pillar effect due to the inactivation of Cs+ and the excellent coherent structure formed by CsMnHCF and NaMnHCF. This research provides a new perspective on stabilizing NaMnHCF with other alkaline elements.

Advances in Mn-Based Electrode Materials for Aqueous Sodium-Ion Batteries

Aqueous sodium-ion batteries have attracted extensive attention for large-scale energy storage applications, due to abundant sodium resources, low cost, intrinsic safety of aqueous electrolytes and eco-friendliness. The electrochemical performance of aqueous sodium-ion batteries is affected by the properties of electrode materials and electrolytes. Among various electrode materials, Mn-based electrode materials have attracted tremendous attention because of the abundance of Mn, low cost, nontoxicity, eco-friendliness and interesting electrochemical performance. Aqueous electrolytes having narrow electrochemical window also affect the electrochemical performance of Mn-based electrode materials. In this review, we introduce systematically Mn-based electrode materials for aqueous sodium-ion batteries from cathode and anode materials and offer a comprehensive overview about their recent development. These Mn-based materials include oxides, Prussian blue analogues and polyanion compounds. We summarize and discuss the composition, crystal structure, morphology and electrochemical properties of Mn-based electrode materials. The improvement methods based on electrolyte optimization, element doping or substitution, optimization of morphology and carbon modification are highlighted. The perspectives of Mn-based electrode materials for future studies are also provided. We believe this review is important and helpful to explore and apply Mn-based electrode materials in aqueous sodium-ion batteries.

Enabling long-cycling aqueous sodium-ion batteries via Mn dissolution inhibition using sodium ferrocyanide electrolyte additive

Aqueous sodium-ion batteries (AIBs) are promising candidates for large-scale energy storage due to their safe operational properties and low cost. However, AIBs have low specific energy (i.e., <80 Wh kg^-1) and limited lifespans (e.g., hundreds of cycles). Mn-Fe Prussian blue analogues are considered ideal positive electrode materials for AIBs, but they show rapid capacity decay due to Jahn-Teller distortions. To circumvent these issues, here, we propose a cation-trapping method that involves the introduction of sodium ferrocyanide (Na₄Fe(CN)₆) as a supporting salt in a highly concentrated NaClO₄-based aqueous electrolyte solution to fill the surface Mn vacancies formed in Fe-substituted Prussian blue Na_1.58Fe_0.07Mn_0.97Fe(CN)₆ · 2.65H₂O (NaFeMnF) positive electrode materials during cycling. When the engineered aqueous electrolyte solution and the NaFeMnF-based positive electrode are tested in combination with a 3, 4, 9, 10-perylenetetracarboxylic diimide-based negative electrode in a coin cell configuration, a specific energy of 94 Wh kg^-1 at 0.5 A g^-1 (specific energy based on the active material mass of both electrodes) and a specific discharge capacity retention of 73.4% after 15000 cycles at 2 A g^-1 are achieved.

Heterostructure engineering and ultralow Pt-loaded multicomponent nanocage for efficient electrocatalytic oxygen evolution

Developing highly efficient electrocatalysts based on appropriate heterojunction engineering and electronic structure modification for the oxygen evolution reaction (OER) has been extensively recognized as an effective approach to increase the efficiency of water splitting. Herein, ultralow Pt-loaded (1 %) NiCoFeP@NiCoFe-PBA hollow nanocages with well-defined heterointerfaces and modified electronic environment are successfully fabricated. As expected, the obtained Pt-NiCoFeP@NiCoFe-PBA exhibits outstanding performance with a low overpotential of 255 mV at 10 mA cm^-2 and a small Tafel slope of 57.2 mV dec^-1. More specifically, the highly open three-dimensional structure, exquisite interior voids and abundant surface defects endow Pt-NiCoFeP@NiCoFe-PBA nanocages with more electrochemical active sites. Meanwhile, experimental results and mechanism studies also reveal that the construction of heterogeneous interfaces as well as incorporation of noble metals could readily induce strong synergistic effects and significantly tailor electronic configurations to optimize the binding energy of the intermediates, thereby achieving prominent OER performance.

Chemical Etching and Phase Transformation of Nickel-Cobalt Prussian Blue Analogs for Improved Solar-Driven Water-Splitting Applications

Although Prussian blue and its analogs (PB/PBAs) have open framework structures, large surface areas, uniform metal active sites, and tunable compositions, and have been investigated for a long time, owing to their unfavorable visible light responsiveness, they rarely been reported in photocatalysis. This largely limits their applications in solar-to-chemical energy conversion. Here, a continuous-evolution strategy was conducted to convert the poor-performance NiCo PBA (NCP) toward high-efficiency complex photocatalytic nanomaterials. First, chemical etching was performed to transform raw NCP (NCP-0) to hollow-structured NCP (including NCP-30, and NCP-60) with enhanced diffusion, penetration, mass transmission of reaction species, and accessible surface area. Then, the resultant hollow NCP-60 frameworks were further converted into advanced functional nanomaterials including CoO/3NiO, NiCoP nanoparticles, and CoNi₂S₄ nanorods with a considerably improved photocatalytic H₂ evolution performance. The hollow-structured NCP-60 particles exhibit an enhanced H₂ evolution rate (1.28 mol g^-1h^-1) compared with the raw NCP-0 (0.64 mol g^-1h^-1). Furthermore, the H₂ evolution rate of the resulting NiCoP nanoparticles reached 16.6 mol g^-1h^-1, 25 times that of the NCP-0, without any cocatalysts.

Influence of Vacancies in Manganese Hexacyanoferrate Cathode for Organic Na-Ion Batteries: A Structural Perspective

Manganese hexacyanoferrates (MnHCF) are promising positive electrode materials for non-aqueous batteries, including Na-ion batteries, due to their large specific capacity (>130 mAh g^-1 ), high discharge potential and sustainability. Typically, the electrochemical reaction of MnHCF associates with phase and structural changes, due to the Jahn-Teller (JT) distortion of Mn sites upon the charge process. To understand the effect of the MnHCF structure on its electrochemical performance, two MnHCF materials with different vacancies content are investigated herein. The electrochemical results show that the sample with lower vacancy content (4 %) exhibits relatively higher capacity retention of 99.1 % and 92.6 % at 2^nd and 10^th cycles, respectively, with respect to 97.4 % and 79.3 % in sample with higher vacancy content (11 %). Ex-situ X-ray absorption spectroscopy (XAS) and ex situ X-ray diffraction (XRD) characterization results show that a weaker cooperative JT-distortion effect and relatively smaller crystal structure modification occurred for the material with lower vacancies, which explains the better electrochemical performance in cycled electrodes.

Progress in the preparation of Prussian blue-based nanomaterials for biomedical applications

Prussian blue (PB) is composed of the coordination network of Fe²⁺-CN-Fe³⁺ mixed valence state as a classic metal complex, which includes a C atom and Fe²⁺ (low spin), N atom and Fe³⁺ (high spin). PB and its analogues (PBA) have excellent biosafety, good magnetic properties, outstanding photothermal properties and the ability to mimic enzymatic behaviors due to their stable structure, tunable size, controllable morphology, abundant modification methods and excellent physicochemical properties. They have received increasing research interest and have shown promising applications in the biomedical field. Here, progress in the preparation of PB-based nanomaterials for biomedical applications is summarized and discussed. The preparation strategies, traditional synthesis and emerging preparation methods of PB are summarized systematically in this review. The design and preparation of PBA, PB(PBA)-based hollow structures and PB(PBA)-based composites are also included. While introducing the preparation status, some PB-based nanomaterials that have performed well in specific biomedical fields are emphasized. More importantly, the key factors and future development of PB for the clinical translation as multifunctional nanomaterials are also discussed. This review provides a reference for the design and biomedical application of PB-based nanomaterials.

Lithiated Prussian blue analogues as positive electrode active materials for stable non-aqueous lithium-ion batteries

Prussian blue analogues (PBAs) are appealing active materials for post-lithium electrochemical energy storage. However, PBAs are not generally suitable for non-aqueous Li-ion storage due to their instability upon prolonged cycling. Herein, we assess the feasibility of PBAs with various lithium content for non-aqueous Li-ion storage. We determine the crystal structure of the lithiated PBAs via neutron powder diffraction measurements and investigate the influence of water on structural stability and Li-ion migration through operando X-ray diffraction measurements and bond valence simulations. Furthermore, we demonstrate that a positive electrode containing Li_2-xFeFe(CN)₆⋅nH₂O (0 ≤ x ≤ 2) active material coupled with a Li metal electrode and a LiPF₆-containing organic-based electrolyte in coin cell configuration delivers an initial discharge capacity of 142 mAh g^-1 at 19 mA g^-1 and a discharge capacity retention of 80.7% after 1000 cycles at 1.9 A g^-1. By replacing the lithium metal with a graphite-based negative electrode, we also report a coin cell capable of cycling for more than 370 cycles at 190 mA g^-1 with a stable discharge capacity of about 105 mAh g^-1 and a discharge capacity retention of 98% at 25 °C.

Reforming Magnet Waste to Prussian Blue for Sustainable Sodium-Ion Batteries

Increasing generation of permanent magnet waste has resulted in an urgent need to preserve finite resources. Reforming these wastes as feedstock to produce renewables is an ideal strategy for addressing waste and energy challenges. Herein, our work reports a smart and sustainable strategy to convert iron in magnet wastes into Prussian blue analogues that can serve as cathode materials for sodium-ion batteries. Moreover, a method to control feed rates is proposed to generate high-quality materials with fewer [Fe(CN)₆] vacancies at a feed rate of 3 mL min^-1. The recycled Na_1.46Fe[Fe(CN)₆]_0.85·□_0.15 shows low vacancies and excellent cycling stability over 300 cycles (89% capacity retention at 50 mA g^-1). In operando, evidence indicates that high-quality Prussian blue allows fast sodium-ion mobility and a high degree of reversibility over the course of cycling, although with a three-phase-transition mechanism. This study opens up a future direction for magnet waste created with the expectation of being environmentally reused.

Effect of Surface Charge on the Fabrication of Hierarchical Mn-Based Prussian Blue Analogue for Capacitive Desalination

Multiple and hierarchical manganese (Mn)-based Prussian blue analogues obtained on different substrates are successfully prepared using a universal, facile, and simple strategy. Different functional groups and surface charge distributions on carbon cloth have significant effects on the morphologies and nanostructures of Mn-based Prussian blue analogues, thereby indirectly affecting their physicochemical properties. Combined with the advantages of the modified carbon cloth and the nanostructured Mn-based Prussian blue analogues, the composite with negative surface charge formed by the electronegativity differences shows good electrochemical properties, leading to improvement in charge efficiency during capacitive desalination. An asymmetric device fabricated with Mn-based Prussian blue analogue-modified F-doped carbon cloth as the cathode and acid-treated carbon cloth as the anode presents the highest salt adsorption capacity of 10.92 mg g^-1 with a charge efficiency of 82.28% and the lowest energy consumption of 0.45 kW h m^-3 at 1 V due to the main influencing factor from the negative surface charge leading to co-ion expulsion boosting the capacitive deionization performance. We provide insights for further exploration of the relationship between second-phase materials and carbon cloth, while offering some guidance for the design and preparation of electrodes for desalination and beyond.

Electrochemically Active Mn-Doped Iron Hexacyanoferrate as the Cathode Material in Sodium-Ion Batteries

In this work, for the performance enhancement of iron hexacyanoferrate, an electrochemically active Mn-doped iron hexacyanoferrate cathode is fabricated via a bottom-up approach. It is found that the pre-treatment of interstitial water and appropriate Mn doping are two keys to achieving higher capacity and higher stability. The interstitial water has a trade-off effect between the alleviation of volume expansion upon Na⁺ (de)intercalation and the retardation of Na-ion diffusion. The moisture-tailored iron hexacyanoferrate with appropriate Mn doping exhibits a high initial Coulombic efficiency of 94.8%, enhanced capacity and rate performance, and excellent cycling stability. These results benefit from the fact that the extraction/insertion of Na ions from/into the lattice via a solid-solution mechanism correspond to both the slight volume expansion and fast sodium diffusion rate; otherwise, the removal of interstitial water and a higher Mn content might lead to poor cycling stability due to excessive volume expansion resulting from rhombohedral to cubic phase transformation. Finally, the less demand on the control of air humidity for the fabrication of electrodes and the potential for the full cell coupled with hard carbon are also demonstrated, which shows great potential for practical applications.

Na1.51 Fe[Fe(CN)6 ]0.87 ·1.83H2 O Hollow Nanospheres via Non-Aqueous Ball-Milling Route to Achieve High Initial Coulombic Efficiency and High Rate Capability in Sodium-Ion Batteries

Prussian blue analogues (PBAs) have attracted extensive attention as cathode materials in sodium-ion batteries (SIBs) due to their low cost, high theoretical capacity, and facile synthesis process. However, it is of great challenge to control the crystal vacancies and interstitial water formed during the aqueous co-precipitation method, which are also the key factors in determining the electrochemical performance. Herein, an antioxidant and chelating agent co-assisted non-aqueous ball-milling method to generate highly-crystallized Na_{2- x} Fe[Fe(CN)₆ ]_y with hollow structure is proposed by suppressing the speed and space of crystal growth. The as-prepared Na_{2- x} Fe[Fe(CN)₆ ]_y hollow nanospheres show low vacancies and interstitial water content, leading to a high sodium content. As a result, the Na-rich Na_1.51 Fe[Fe(CN)₆ ]_0.87 ·1.83H₂ O hollow nanospheres exhibit a high initial Coulombic efficiency, excellent cycling stability, and rate performance via a highly reversible two-phase transition reaction confirmed by in situ X-ray diffraction. It delivers a specific capacity of 124.2 mAh g^-1 at 17 mA g^-1 , presenting ultra-high rate capability (84.1 mAh g^-1 at 3400 mA g^-1 ) and cycling stability (65.3% capacity retention after 1000 cycles at 170 mA g^-1 ). Furthermore, the as-reported non-aqueous ball-milling method could be regarded as a promising method for the scalable production of PBAs as cathode materials for high-performance SIBs.

Fluffy-Like Cation-Exchanged Prussian Blue Analogues for Sodium-Ion Battery Cathodes

Prussian blue (PB) and its analogues are considered as promising cathode materials for sodium-ion batteries (SIBs) owing to their low cost and high capacity. However, it is still a huge challenge to avoid obvious capacity decay during cycling due to the structural collapse. Herein, we design a method to replace parts of Fe ion sites in PB with Ni ions to prepare fluffy-like nickel PB (PB-Ni) by cationic solution immersion, which improves cycling stability for sodium storage. The content of Ni in PB-Ni is explored by regulating the soaking time in the Ni-containing solution, which results in different effects on the electrochemical performance as cathodes of SIBs. Especially, PB-Ni-1d (soaking in NiCl₂ solution for 1 day) exhibits an initial capacity of 114.2 mA h g^-1 at 50 mA g^-1 and a stable cycling performance of 800 cycles at 300 mA g^-1. Furthermore, the reversible phase transformation and small volume variation for PB-Ni-1d are revealed by in situ X-ray diffraction characterization. The nickel hexacyanoferrate in outer layer maintains the cubic phase to stabilize the crystal structure. The cation-exchange strategy provides a facile idea to fabricate high-quality PB cathodes with superior stability for high-performance SIBs.

Monoclinic Bimetallic Prussian Blue Analog Cathode with High Capacity and Long Life for Advanced Sodium Storage

Prussian blue analogs (PBAs) are regarded as promising cathode materials for sodium-ion batteries (SIBs), but most of them suffer from an incompatibility between capacity and structural stability. Herein, an innovative disodium ethylenediaminetetraacetate (Na₂EDTA)-assisted hydrothermal method is proposed to synthesize monoclinic Fe-substituted Ni-rich PBA (H-PBA) cathodes for Na-ion storage. The as-designed H-PBA cathode combines the merits of the low strain of a Ni-based PBA framework and the enhanced capacity of N-Fe³⁺/Fe²⁺ redox sites. It can achieve superior sodium-storage performance in terms of capacity, rate capability, and cycle stability. Moreover, ex situ measurements reveal that solid solution (2.0-3.0 V) and phase-transition (3.0-4.0 V) reactions occur during the charge/discharge process to allow almost 1.5 Na⁺ storage in the H-PBA lattice. Meanwhile, the H-PBA//NaTi₂(PO₄)₃@C full cell also delivers remarkable electrochemical properties. Prospectively, this work would promote the practical application of SIBs in grid-scale electric energy storage.