Reaction: Engineer Biology for Uranium

Interlayer manipulation of bio-inspired Ti3C2Tx nanocontainer through intercalation of amino acid molecules to dramatically boosting uranyl hijacking capability from seawater

More than 4.5 billion tons of unconventional uranium resources [UO2(CO3)3]4- are uniformly dissolved in seawater, providing a sustainable and abundant fuel source for the development of nuclear energy. Herein, we presented a rational design and development of Ti3C2Tx nanocontainer inspired by the exceptional selectivity and affinity exhibited by superb-uranyl proteins through amino acid intercalation. The amino acid intercalation of Ti3C2Tx demonstrated exceptional UO22+ capture capacity (Arg-Ti3C2Tx, His-Ti3C2Tx, and Lys-Ti3C2Tx with qmax values of 594.46, 846.04, and 1030.17 mg/g). Furthermore, these intercalated materials exhibited remarkable sequestration efficiency and selectivity (Uinitial = ∼45.2 ∼7636 μg/L; ∼84.45% ∼98.08%; and ∼2.72 ×104 ∼1.28 ×105 KdU value), despite the presence of an overwhelming surplus of Na+, Ca2+, Mg2+, and Co2+ ions. Significantly, even in the 0.3 M NaHCO3 solution and surpassing 103-fold of the Na3VO4 system, the adsorption efficiency of Lys-Ti3C2Tx still achieved a remarkable 63.73% and 65.05%. Moreover, the Lys-Ti3C2Tx can extract ∼30.23 ∼8664.03 μg/g uranium after 24 h contact in ∼13.3 ∼5000 μg/L concentration from uranium-spiked natural seawater. The mechanism analysis revealed that the high binding capability can be attributed to the chelation of carboxyl and amino groups with uranyl ions. This innovative state-of-the-art approach in regulating uranium harvesting capability through intercalation of amino acid molecules provides novel insights for extracting uranium from seawater.

Enhanced uranium extraction from seawater: from the viewpoint of kinetics and thermodynamics

Uranium extraction from seawater (UES) is recognized as one of the seven pivotal chemical separations with the potential to revolutionize global paradigms. The forthcoming decade is anticipated to witness a surge in UES, driven by escalating energy demands. The oceanic reservoirs, possessing uranium quantities approximately 1000-fold higher than terrestrial mines, present a more sustainable and environmentally benign alternative. Empirical evidence from historical research indicates that adsorption emerges as the most efficacious process for uranium recovery from seawater, considering operational feasibility, cost-effectiveness, and selectivity. Over the years, scientific exploration has led to the development of a plethora of adsorbents with superior adsorption capacity. It would be efficient to design materials with a deep understanding of the adsorption from the perspective of kinetics and thermodynamics. Here, we summarize recent advancements in UES technology and the contemporary challenges encountered in this domain. Furthermore, we present our perspectives on the future trajectory of UES and finally offer our insights into this subject.

High-efficiency uranium extraction from seawater by low-cost natural protein hydrogel

Utilization of uranium resource in seawater are highly possible to meet the growth demands for the sustainable development of nuclear energy industry. Bio-adsorbents exhibit high performance in terms of adsorption selectivity, equilibrium speed, and environmental friendliness, while the high fabrication cost hinders their practical application. In this study, a low-cost soy protein isolate (SPI) is used to fabricate adsorbent named SPI hydrogel for uranium extraction. This is the first report on applying bio-adsorbents derived from low-cost natural proteins for uranium extraction. The SPI hydrogel showed high uranium adsorption capacity of 53.94 mg g^-1 in simulated nuclear wastewater and 5.29 mg g^-1 is achieved in natural seawater, which is higher than all currently available adsorbents based on non-modified natural biomolecules. The amino and oxygen-containing groups are identified as the functional groups for uranyl binding by providing four oxygen and two nitrogen atoms to form equatorial coordination with uranyl, which guarantees the high binding selectivity and affinity to uranyl ions. The low cost for accessing the raw material together with the environmental friendliness, high salt tolerance, high uranium adsorption ability, and high selectivity to uranium, make SPI hydrogel a promising adsorbent for uranium extraction from seawater and nuclear wastewater.

Uranium extraction from seawater: material design, emerging technologies and marine engineering

Uranium extraction from seawater (UES), a potential approach to securing the long-term uranium supply and sustainability of nuclear energy, has experienced significant progress in the past decade. Promising adsorbents with record-high capacities have been developed by diverse innovative synthetic strategies, and scale-up marine field tests have been put forward by several countries. However, significant challenges remain in terms of the adsorbents' properties in complex marine environments, deployment methods, and the economic viability of current UES systems. This review presents an up-to-date overview of the latest advancements in the UES field, highlighting new insights into the mechanistic basis of UES and the methodologies towards the function-oriented development of uranium adsorbents with high adsorption capacity, selectivity, biofouling resistance, and durability. A distinctive emphasis is placed on emerging electrochemical and photochemical strategies that have been employed to develop efficient UES systems. The most recent achievements in marine tests by the major countries are summarized. Challenges and perspectives related to the fundamental, technical, and engineering aspects of UES are discussed. This review is envisaged to inspire innovative ideas and bring technical solutions towards the development of technically and economically viable UES systems.

Directed assembly of genetically engineered eukaryotic cells into living functional materials via ultrahigh-affinity protein interactions

Engineered living materials (ELMs) are gaining traction among synthetic biologists, as their emergent properties and nonequilibrium thermodynamics make them markedly different from traditional materials. However, the aspiration to directly use living cells as building blocks to create higher-order structures or materials, with no need for chemical modification, remains elusive to synthetic biologists. Here, we report a strategy that enables the assembly of engineered Saccharomyces cerevisiae into self-propagating ELMs via ultrahigh-affinity protein/protein interactions. These yeast cells have been genetically engineered to display the protein pairs SpyTag/SpyCatcher or CL7/Im7 on their surfaces, which enable their assembly into multicellular structures capable of further growth and proliferation. The assembly process can be controlled precisely via optical tweezers or microfluidics. Moreover, incorporation of functional motifs such as super uranyl-binding protein and mussel foot proteins via genetic programming rendered these materials suitable for uranium extraction from seawater and bioadhesion, respectively, pointing to their potential in chemical separation and biomedical applications.