Transparent polymers to emulate the rheological properties of primary, activated, and digested sludge

Adaptive regulation of activated sludge's core functional flora based on granular internal spatial microenvironment

A great deal of efforts has been put into studying the influence of the external macroenvironment for activated sludge to survive on microbial community succession, while granular internal spatial microenvironment should be given equal attention, because it is more directly involved in the information exchange and material transfer among microorganisms. This study systematically investigated the effects of granular microenvironment on spatial colonization and composition of sludge's core functional flora, and the corresponding difference of biological treatment performance. High content of extracellular-proteins (67.53 mg/gVSS) or extracellular-polysaccharide (65.02 mg/gVSS) stimulated the microbial flocculation and aggregation of 0.5-1.5 mm granules (GS) or 1.5-3.0 mm granules (GM), respectively, which was resulted from excellent cell hydrophobicity (59.26%) or viscosity (3.47 mPa s), therefore, constituted relatively dense porous frame. More hollow space existed in 3.0-5.0 mm granules (GL), which formed loose skeleton with 0.213 mL/g of total pore volume and 17.21 nm of average pore size. Combining scanning electron microscope images and fluorescent in-situ hybridization based microbiological analysis, aerobic nitrifiers were observed to wrap or surround anaerobic bacteria, or facultative/anaerobic bacteria were self-encapsulated, which created granule's unique microenvironment with alternating aerobic and anaerobic zones. GS has the most rich organic matter degrading bacteria and anaerobic heterotrophic denitrifiers, while GM and GL presented the greatest relative abundance of facultative and aerobic denitrifiers, respectively. The activity of dehydrogenase and nitrogen invertase of GM showed be 1.32-3.09 times higher than those of GS and GL, contributing to its higher carbon and nitrogen removal. These findings highlight the importance of granular microenvironment to adaptive regulation of activated sludge's core functional flora and corresponding pollutant removal performance.

Direct sludge granulation by applying mycelial pellets in continuous-flow aerobic membrane bioreactor: Performance, granulation process and mechanism

This study provides a sustainable manner for direct cultivation of aerobic granular sludge (AGS) by addition of mycelial pellets (MPs) into continuous-flow aerobic MBR. The results showed that the granulation time in MPs-MBR was shortened by at least 65 days, accounting for enhanced mean size of granules (0.68-0.76 mm), increased mixed liquor suspended solids (MLSS) concentration (12.8 g/L) and improved settling ability (78.1 mL/g), in comparison with that of 0.23-0.28 mm, 9.8 g/L and 102.1 mL/g in control MBR. MPs-MBR demonstrated significant advantages in terms of COD reduction (97.0-99.1%), NH₄⁺-N reduction (100%) and TN reduction (32.27-42.33%). MPs, extracellular polymeric substances (EPS) and filamentous bacteria acted as inducible nucleus, crosslinking matter and supporting skeleton, respectively, in favor of promoting the formation and stabilization of AGS with a four-layered structure. The relevant mechanism was underlined by rheological analysis, indicating that MPs addition enhanced non-Newtonian flow characteristics and network structure of sludge.

Insight into formation and biological characteristics of Aspergillus tubingensis-based aerobic granular sludge (AT-AGS) in wastewater treatment

The long start-up time and facile biomass loss of aerobic granular sludge (AGS) impede its application for actual wastewater treatment. The present study investigates a novel assist-aggregation strategy based on Aspergillus tubingensis (AT) mycelium pellets to accelerate sludge granulation, and engineered Fe₃O₄ nanoparticles (NPs) were used to further enhance flocculent sludge (FS) aggregation. The AT mycelium pellets, modified by 0.5 g/L Fe₃O₄@SiO₂-QC NPs (AT-V), had a more compact internal structure than the unmodified group (AT-I). The content of extracellular polymeric substances (EPS) and the zeta potential values were observed to increase from 39.86 mg/gVSS and -9.19 mv for AT-I to 69.64 mg/gVSS and 2.35 mv for AT-V, respectively. In optimized cultivation conditions, the aggregated sludge biomass of AT-V reached 1.54 g/g. An original AT-based AGS (AT-AGS) with a high biological activity (64.45 mgO₂/gVSS·h as specific oxygen uptake rate) and enhanced velocity (58.22 m/h) was developed in only 9 days. The removal efficiencies of total nitrogen (TN) and total phosphorus (TP) of the AT-AGS were 12.24% and 16.29% higher than those of the inoculated FS under high feeding load. Additionally, the analysis of cyclic diguanylate (c-di-GMP) and con-focal microscope images implied that polysaccharide (PS) of EPS played an important role in maintaining the stability of the AT-AGS. Finally, the dominant functional species contributing to sludge aggregation and pollutants removal of the AT-AGS showed a larger richness and diversity than those of the inoculated FS. This study might provide a novel high-efficiency strategy for the fast formation of AGS.

Anaerobic co-digestion of sewage sludge with cellulose, protein, and lipids: Role of rheology and digestibility

Rheology is known to have an impact on the performance of digesters, but the effect of additional substrates (co-digestion) is poorly understood. The main objective of this study was to investigate the effects of the addition of cellulose, protein and lipids to substrates on the rheological behaviour and biogas production of the mixture of primary sludge (PS) and waste-activated sludge (WAS) in a batch system. A mixture of PS and WAS to form the main substrate was anaerobically co-digested with different types of organic matter (cellulose, protein and lipids) as co-substrates at different co-substrate to main substrate ratios of 2-8 (wt%) under mesophilic conditions and below ammonia inhibition levels. Yield stress (τ_y) and the flow consistency index (k) of the combined feed in the case of cellulose and protein were significantly dependent on the amount of co-substrate added, while there was an insignificant impact on these properties when lipids were added. Cellulose significantly increased τ_y and k in the feed, which resulted in poor fluidity and the improper homogenisation of the digester content, and consequently decreased the biogas yield. In contrast, the biogas yield was improved through the addition of 2% to 6% protein despite an increase in τ_y and k of the feed, but the methane yield decreased at 7% and 8% levels of protein concentration. This observation indicates that the threshold for τ_y and k of the digester media depends on the organic nature and digestibility of the substrate. There was no significant impact on the flow properties of the initial mixture when lipids were added, and their addition increased the biogas yield. A first-order kinetic reaction model was used for predicting the yield of methane from these digesters. The rate constant values revealed an increasing trend, with the highest for protein then lipids then cellulose.