Effect of moisture content on the extraction rate of coffee oil from spent coffee grounds using Norflurane as solvent

Using Hydrofluorocarbon Extracts of Hop in a Pilot Scale Brewing Process

In recent years, the use of hop extracts in industrial and home brewing processes as an alternative to hop cones or pellets usually added to wort during boiling has become increasingly popular. These extracts represent concentrated sources of bitter compounds, i.e., α- and β-acids, which are involved in some of the main reactions that take place in the wort and are responsible for the bitterness and the final quality of beer. This work aims at proposing a novel extraction technique, using a hydrofluorocarbon solvent in subcritical conditions; this process provided an extraction yield of 19% and an α-acid recovery of approximately 49% in 120 min of process. The α-acid isomerization kinetics of thermally treated hop extracts were studied and compared with those of both hop pellets and a CO2 extract. Laboratory scale tests showed that shorter boiling times were needed using hydrofluorocarbon and CO2 extracts (approximately 25 min and 34 min, respectively) to reach the same isomerization efficiency of 16.73%, achieved in 50 min of boiling with pellets. Moreover, the process was scaled up and the possibility of considerably reducing the conventional treatment times using hydrofluorocarbon extracts was confirmed: the same isomerization yield (9.1%) obtained after 50 min using the traditional procedure with hop pellets was reached in a shorter time of approximately 35 min in a pilot apparatus.

Recovery of Carotenoids from Tomato Pomace Using a Hydrofluorocarbon Solvent in Sub-Critical Conditions

The enrichment of oils with nutraceutical bioactive phytomolecules allows the achievement of functional oil-based products of great interest in the food, pharmaceutical, and cosmetic fields. Carotenoids, such as lycopene and β-carotene, are available at a high concentration in tomatoes and tomato waste products, as peels, seeds, and pulp; their recovery is recently attracting growing interest and economic importance in the food industry, and also in consideration of the huge amount of industrial waste produced. The aim of this work is to study the production of an oil functionalized with carotenoids from tomato peels. The extractions were carried out using an innovative process based on the use of commercial Norflurane as solvent in subcritical conditions. Extraction trials were performed on dried tomato peels, with the addition of tomato seeds or wheat germ flour as sources of oily co-solvents, capable of also preserving the biological characteristics of the carotenoids extracted. Although lycopene solubility in Norflurane is quite low, the solvent recirculation and regeneration were allowed to reach a concentration in the oily extracts of approximately 0.3 mg/goil after 2 h of the process. The enrichment in β-carotene was more pronounced, and concentrations of 0.733 mg/goil and 0.952 mg/goil were observed in wheat germ and tomato seed oils, respectively. The results obtained in this study were compared with those obtained by traditional and supercritical CO2 extraction methods.

Cervical anticancer activities of Annona squamosa Linn. leaf isolate

Background and Aim:

Cancer is one of the leading causes of death, the need for new anticancer herbal drugs is becoming more urgent considering the side effects of synthetic drugs. This study aimed to determine the anticancer activity of isolates derived from the methanol extract of Annona squamosa Linn. leaves and to identify the compounds that have an active effect against HeLa cells.

Materials and Methods:

The leaf metabolites of A. squamosa L. were extracted using methanol at room temperature (28°C) and were partitioned into n-hexane, chloroform, and n-butanol. The toxicity test of these extracts was conducted using a brine shrimp lethality assay. Furthermore, the most toxic extracts were separated and purified using silica gel column chromatography to yield four isolate fractions: FA, FB, FC, and FD. The most toxic isolates were tested for anticancer against HeLa cells, and their compounds were identified using liquid chromatography-mass spectrometry.

Results:

The results showed that the most toxic isolate with an LC₅₀ value of 100.00 ppm had a potency similar to that of an anticancer agent with an IC₅₀ value of 70.9021 ppm. Furthermore, the five compounds identified in this isolate include (6S, 7aR)-6-hydroxy-4,4,7a-trimethyl-6,7-dihydro-5H-1-benzofuran-2-one or loliolide, cocamidopropyl betaine, N-[3-(dimethylamino)propyl]dodecanamide or lauramidopropyl dimethylamine, linolenic acid, and 1-dodecyl-2-azepanone or laurocapram.

Conclusion:

It can be concluded that the leaf isolates of A. squamosa Linn. had shown anticancer activities against cervical cancer.

Wax Separated Effectively from Fischer-Tropsch Wax Residue by Solvent Desorption: Thermodynamic and Kinetic Analysis

The separation and recycling of effective resources in Fischer-Tropsch wax residue (FTWR) are urgent because of the environmental hazards and energy waste they bring. In this study, organic solvents are used to separate recyclable resources from FTWR efficiently, achieving the goals of “Energy Recycle” and “Fisher-Tropsch Wax Residue Treatment”. The response surface methodology (RSM) response surface analysis model accurately evaluates the relationship among temperature, residence time, liquid–solid ratio, and desorption rate and obtains the best process parameters. The results show that the product yield can reach 82.28% under the conditions of 80 °C, 4 h, and the liquid–solid ratio of 24.4 mL/g. Through the kinetic analysis of the desorption process of FTWR, the results show that the desorption process conforms to the pseudo second-order kinetic model and the internal diffusion model. The thermodynamic function results showed that there were not only van der Waals forces in the desorption process, but other strong interaction forces such as hydrogen bonds. In addition, Langmuir, Freundlich, and BET equations are used to describe the desorption equilibrium. Scanning electron microscopy (SEM) were used to analyze the pore structure of FTWR during desorption. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and Gas chromatography-mass spectrometer (GC-MS) analysis confirmed that the desorption product’s main component was hydrocarbons (50.38 wt%). Furthermore, naphthenic (22.95 wt%), primary alcohol (11.62 wt%), esters (8.7 wt%), and aromatic hydrocarbons (6.35 wt%) compounds were found and can be further purified and applied to other industrial fields. This study shows that using petroleum ether to separate and recover clean resources from Fischer-Tropsch wax residue is feasible and efficient and has potential industrial application prospects.