Selectivity differences in the separation of amphipathic α-helical peptides during reversed-phase liquid chromatography at pHs 2.0 and 7.0

The development and optimisation of an HPLC-based in vitro serum stability assay for a calcitonin gene-related peptide receptor antagonist peptide

Evaluation of the stability of peptide drug candidates in biological fluids, such as blood serum, is of high importance during the lead optimisation phase. Here, we describe the optimisation and validation of a method for the evaluation of the stability of a lead calcitonin gene-related peptide antagonist peptide (P006) in blood serum. After initially determining appropriate peptide and human serum concentrations and selection of the quenching reagent, the HPLC method optimisation used two experimental designs, Plackett-Burman design and Taguchi design. The analytical method was validated as complying with the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines. The optimised method allowed the successful resolution of the parent peptide from its metabolites using RP-HPLC and identification of the major metabolites of P006 by mass spectrometry. This paradigm may be widely adopted as a robust early-stage platform for screening peptide stability to rule out candidates with low in vitro stability, which would likely translate into poor in vivo pharmacokinetics.

Investigation into reversed-phase chromatography peptide separation systems Part IV: Characterisation of mobile phase selectivity differences

The differentiation of mobile phase compositions between sub-classes which exhibit distinct chromatographic selectivity (i.e. termed characterisation) towards a range of peptide probes with diverse functionality and hence the possibility for multi-modal retention mechanisms has been undertaken. Due to the complexity of peptide retention mechanisms in given mobile phase conditions, no attempt has been made to explain these, instead mobile phases have simply been classified into distinct groups with an aim of identifying those yielding differing selectivities for use in strategic method development roadmaps for the analysis of peptide mixtures. The selectivity differences between nine synthetic peptides (fragments of [Ile27]-Bovine GLP-2) were used to assess how fifty-one RPC mobile phase compositions of differing pH (range 1.8 - 7.8), salt types, ionic strengths, ion-pair reagents and chaotropic / kosmotropic additives affected chromatographic selectivity on a new generation C18 stationary phase (Ascentis Express C18). The mobile phase compositions consisted of commonly used and novel UV or MS compatible additives. The chemometric tool of Principal Component Analysis (PCA) was used to visualise the differences in selectivity generated between the various mobile phases evaluated. The results highlight the importance of screening numerous mobile phases of differing pH, ion-pair reagents and ionic strength in order to maximise the probability of achieving separation of all the peptides of interest within a complex mixture. PCA permitted a ranking of the relative importance of the various mobile phase parameters evaluated. The concept of using this approach was proven in the analysis of a sample of Bovine GLP-2 (1-15) containing synthesis related impurities. Mobile phases with high ionic strength were demonstrated to be crucial for the generation of symmetrical peaks. The observations made on the C18 phase were compared on three additional stationary phases (i.e. alkyl amide, fluorophenyl and biphenyl), which had previously been shown to possess large selectivity differences towards these peptides, on a limited sub-set of mobile phases. With the exception of the ion-pair reagent, similar trends were obtained for the C18, fluorophenyl and biphenyl phases intimating the applicability of these findings to the vast majority of RPC columns (i.e. neutral or weakly polar in character) which are suitable for the analysis of peptides. The conclusions were not relevant for columns with a more disparate nature (i.e. containing a high degree of positive charge).

The Role of Counter-Ions in Peptides-An Overview

Peptides and proteins constitute a large group of molecules that play multiple functions in living organisms. In conjunction with their important role in biological processes and advances in chemical approaches of synthesis, the interest in peptide-based drugs is still growing. As the side chains of amino acids can be basic, acidic, or neutral, the peptide drugs often occur in the form of salts with different counter-ions. This review focuses on the role of counter-ions in peptides. To date, over 60 peptide-based drugs have been approved by the FDA. Based on their area of application, biological activity, and results of preliminary tests they are characterized by different counter-ions. Moreover, the impact of counter-ions on structure, physicochemical properties, and drug formulation is analyzed. Additionally, the application of salts as mobile phase additives in chromatographic analyses and analytical techniques is highlighted.

Ultrahigh performance liquid chromatography methods facilitate the development of glucose-responsive insulin therapeutics

Insulin oligosaccharide conjugates hold promise as potential glucose-responsive insulins (GRIs), which can improve the therapeutic index of insulins and mitigate the risk of hypoglycemia. A key challenge for the analytical development of such molecules is finding an efficient method to characterize the purity and impurities of conjugated insulins. Using the S-Matrix Fusion QbD-ultrahigh performance liquid chromatography (UHPLC) integrated system, we were able to quickly screen and develop two short UHPLC methods. These methods were used to support process development, clinical batch drug substance (DS) release, and stability studies of MK-2640, an insulin oligosaccharide conjugate. Both methods used a Waters CSH C18 column, with a shallow gradient of acetonitrile to aqueous mobile phase containing 25 mM sodium perchlorate and 0.05% perchloric acid. The 10-min run time method was well suited for process development and monitoring as it was able to separate the main product, MK-2640, six oligosaccharide-substituted recombinant human insulin (RHI) impurities, A21 deamidated MK-2640, and the starting material RHI. The 13-min run time method provided improved separation of the major impurities and demonstrated good chromatographic reproducibility on different instruments or using columns from different lots of stationary phase, which made it ideal for the final DS release. Validation of the 13-min method demonstrated great linearity for both the MK-2640 main peak and its related impurities, low limit of detection (0.02%), and limit of quantitation (0.05%). The high specificity of the method allowed the separation of the degradation products from main peak, thus makes it suitable for stability monitoring. The major impurities in the DS were characterized by two-dimensional liquid chromatography-mass spectrometry (2D-LC-MS).

Structure-guided RP-HPLC chromatography of diastereomeric α-helical peptide analogs substituted with single amino acid stereoisomers

An α-helical model peptide (Ac-EAEKAAKE-X-EKAAKEAEK-amide) was used as a template to examine the efficacy of conventional reversed-phase high-performance liquid chromatography (RP-HPLC) in separating peptide analogs with single substitutions (at position X) of diasteromeric amino acids Ile, allo-Ile, d-Ile and d-allo-Ile. We compared differences in peptide retention behavior on a C8 column and a C18 column at different temperatures. We demonstrated how subtle differences in peptide secondary structure affected by the different substitutions of amino acids with identical overall hydrophobicity enabled effective resolution of these peptide analogs. We also demonstrated the ability of RP-HPLC to separate Ile- and allo-Ile-substituted analogs of a 26-residue α-helical antimicrobial peptide (AMP), with the substitution site towards the C-terminus of the α-helix. These peptides show different values of antibacterial activity and hemolytic activity, and different selectivity against bacteria and human cells. Our results underline the ability of RP-HPLC to resolve even difficult diasteromeric peptide mixtures as well as its value in monitoring very subtle hydrophobicity changes in de novo-designed AMP.

Reversed-phase fused-core HPLC modeling of peptides

Different fused-core stationary phase chemistries (C18, Amide, Phenyl-hexyl and Peptide ES-C18) were used for the analysis of 21 structurally representative model peptides. In addition, the effects of the mobile phase composition (ACN or MeOH as organic modifier; formic acid or acetic acid, as acidifying component) on the column selectivity, peak shape and overall chromatographic performance were evaluated. The RP-amide column, combined with a formic acid–acetonitrile based gradient system, performed as best. A peptide reversed-phase retention model is proposed, consisting of 5 variables: log SumAA, log Sv, clog P, log nHDon and log nHAcc. Quantitative structure-retention relationship (QSRR) models were constructed for 16 different chromatographic systems. The accuracy of this peptide retention model was demonstrated by the comparison between predicted and experimentally obtained retention times, explaining on average 86% of the variability. Moreover, using an external set of 5 validation peptides, the predictive power of the model was also demonstrated. This peptide retention model includes the novel in-silico calculated amino acid descriptor, AA, which was calculated from log P, 3D-MoRSE, RDF and WHIM descriptors.

Retention prediction of peptide diastereomers in reversed-phase liquid chromatography assisted by molecular dynamics simulation

In this study, we explored the relationship between the retention factors and structural flexibilities of peptide diastereomers in reversed-phase chromatography (RPC) based on thermodynamic interpretations. The RPC retention order of antimicrobial peptides, IL-K7F89 (H-ILPWKWKFFPWRR-NH(2)), and its four diastereomers were well correlated with the order of their conformation energies in elution solvent. In particular, when the composition of the sample loading solvent was altered, the retention order changed accordingly. The thermodynamic analysis revealed that the peptide adsorption was driven by adsorption enthalpy, but the retention order was dominated by adsorption entropy. To further understand the relationships between the retention factor and conformation energy, the intramolecular van der Waals energy of peptides and the ordered water molecules associated with peptides were analyzed by all-atom molecular dynamics (MD) simulation. The results showed that the flexible peptide with larger conformation energy had weaker intramolecular hydrophobic interaction and associated with more ordered water molecules. For this peptide diastereomer set, the elution difference is derived by the difference in adsorption entropy gain from repelling the ordered water molecules around the peptide. Consequently, we suggested that the separation of peptide diastereomers could be achieved by RPC, and the elution order could be predicted by their structural flexibilities.

New trends in reversed-phase liquid chromatographic separations of therapeutic peptides and proteins: theory and applications

In the pharmaceutical field, there is considerable interest in the use of peptides and proteins for therapeutic purposes. There are various ways to characterize such complex samples, but during the last few years, a significant number of technological developments have been brought to the field of RPLC and RPLC-MS. Thus, the present review focuses first on the basics of RPLC for peptides and proteins, including the inherent problems, some possible solutions and some directions for developing a new RPLC method that is dedicated to biomolecules. Then the latest advances in RPLC, such as wide-pore core-shell particles, fully porous sub-2 μm particles, organic monoliths, porous layer open tubular columns and elevated temperature, are described and critically discussed in terms of both kinetic efficiency and selectivity. Numerous applications with real samples are presented that confirm the relevance of these different strategies. Finally, one of the key advantages of RPLC for peptides and proteins over other historical approaches is its inherent compatibility with MS using both MALDI and ESI sources.

Quantitative improvements in peptide recovery at elevated chromatographic temperatures from microcapillary liquid chromatography-mass spectrometry analyses of brain using selected reaction monitoring

Elevated chromatographic temperatures are well recognized to provide beneficial analytical effects. Previously, we demonstrated that elevated chromatographic temperature enhances the identification of hydrophobic peptides from enriched membrane samples. Here, we quantitatively assess and compare the recovery of peptide analytes from both simple and complex tryptic peptide matrices using selected reaction monitoring (SRM) mass spectrometry. Our study demonstrates that elevated chromatographic temperature results in significant improvements in the magnitude of peptide recovery for both hydrophilic and hydrophobic peptides from both simple and complex peptide matrices. Importantly, the analytical benefits for quantitative measurements in mouse whole brain matrix are highlighted, suggesting broad utility in the proteomic analyses of complex mammalian tissues. Any improvement in peptide recovery from chromatographic separations translates directly to the apparent sensitivity of downstream mass analysis in microcapillary liquid chromatography-mass spectrometry (muLC-MS) based proteomic applications. Therefore, the incorporation of elevated chromatographic temperatures should result in significant improvements in peptide quantification as well as detection and identification.

Effect of mobile phase anionic additives on selectivity, efficiency, and sample loading capacity of cationic drugs in reversed-phase liquid chromatography

In the present work, we study the effect of mobile phase anionic additive type and concentration on the selectivity, efficiency, and sample loading capacity of cationic drugs in reversed-phase liquid chromatography (RPLC). The type and concentration of an anionic additive are known to have a strong effect on the absolute retention of cations in RPLC; in contrast they have only a small effect on the selectivity of one cation relative to a second as seen here. This is mainly due to the similarity of the ion pair formation constants between the selected cations. The limiting retention factors of cations (i.e. the retention factor of the fully ion-paired analyte at very high additive concentration) are roughly proportional to their inherent hydrophobicities (i.e. the retention factor of the analyte in the absence of the anionic additive). With a given anion, differences in ion pairing strength between the solutes are required for effective selectivity adjustment. Based on the Wade-Lucy-Carr (W-L-C) kinetic model of overload peaks, the approach we developed in our previous work was used to study the effect of mobile phase anionic additives type and concentration on the limiting plate count (N(0)) and sample loading capacity (omega(0.5)) of various cationic drugs. Under linear chromatographic conditions, where the analyte exhibits its smallest peak width and thus maximum apparent plate count, the type and concentration of anionic additives have almost no effect on peak width. In comparison to neutral analytes the sorption isotherms of cationic species are very easily overloaded even when many fewer moles of cations as compared to neutrals are injected. We showed that different anionic additives profoundly affect the cations' "overload profiles" (i.e. plots of plate count versus amount injected) by changing the sample loading capacities. The increase in sample loading capacities with different anions show the same order as the extent of ion pairing between the anions and the basic analytes. The detrimental effect of sample overloading on peak width can be greatly diminished by using either a stronger ion pairing agent or a higher concentration of a given ion pairing agent. Both effects operate by increasing the sample loading capacity, thereby allowing more solute to be injected. We believe that the increase in sample loading capacity described above is due in part to the increase in the number of ion-exchange sites as more anions sorb to the stationary phase. At the same time, the formation of a neutral ion-paired analyte also increases the amount of cation which can be loaded onto the stationary phase by allowing a greater fraction of the analyte to be present in the stationary phase as an electrically neutral (i.e. ion-paired) species.

Analysis of Endogenous D-Amino Acid-Containing Peptides in Metazoa

Peptides are chiral molecules with their structure determined by the composition and configuration of their amino acid building blocks. The naturally occurring amino acids, except glycine, possess two chiral forms. This allows the formation of multiple peptide diastereomers that have the same sequence. Although living organisms use L-amino acids to make proteins, a group of D-amino acid-containing peptides (DAACPs) has been discovered in animals that have at least one of their residues isomerized to the D-form via an enzyme-catalyzed process. In many cases, the biological functions of these peptides are enhanced due to this structural conversion. These DAACPs are different from those known to occur in bacterial cell wall and antibiotic peptides, the latter of which are synthesized in a ribosome-independent manner. DAACPs have now also been identified in a number of distinct groups throughout the Metazoa. Their serendipitous discovery has often resulted from discrepancies observed in bioassays or in chromatographic behavior between natural peptide fractions and peptides synthesized according to a presumed all-L sequence. Because this L-to-D post-translational modification is subtle and not detectable by most sequence determination approaches, it is reasonable to suspect that many studies have overlooked this change; accordingly, DAACPs may be more prevalent than currently thought. Although diastereomer separation techniques developed with synthetic peptides in recent years have greatly aided in the discovery of natural DAACPs, there is a need for new, more robust methods for naturally complex samples. In this review, a brief history of DAACPs in animals is presented, followed by discussion of a variety of analytical methods that have been used for diastereomeric separation and detection of peptides.

Development of a convenient peptide-based assay for lysyl hydroxylase

Hydroxylysine (Hyl) is a posttranslationally modified amino acid found mainly in collagens, the most abundant protein in mammals. Lysyl hydroxylase (LH) catalyzes the hydroxylation of the C-5 position of a Lys residue, resulting in the production of Hyl. Mechanistically, LH incorporates one oxygen atom into both Lys and 2-oxoglutarate; the latter is decarboxylated to form succinate and CO(2). To develop a convenient, RP-HPLC based LH assay, we used Fmoc solid-phase methodology to synthesize three different peptides designed as LH substrates and one peptide corresponding to an LH product. Peptides were characterized by RP-HPLC, MALDI-TOF mass spectrometry and CD spectroscopy. Separation of peptides was examined under a variety of RP-HPLC conditions. The best results were achieved using peptide derivatization (1-anthroylnitrile for organic phase and dansyl chloride for aqueous phase) prior to RP-HPLC analysis. The products (di- and tetra-substituted Lys- and Hyl-containing peptides) were well resolved by RP-HPLC. The resolution of each peak allows for quantification of peak areas, which in turn, when examined as a function of time, can be utilized for studying the kinetics of LH catalyzed reactions. Most significantly, the RP-HPLC assay directly monitors the Hyl containing product. Prior LH assay methods are multi-step, require radio-labeled substrates, and/or measure depletion of 2-oxoglutarate or formation of CO(2). Since the LH reaction with 2-oxoglutarate is uncoupled from Lys hydroxylation, the most accurate assay of LH activity should monitor the formation of Hyl.

Preparative reversed-phase high-performance liquid chromatography collection efficiency for an antimicrobial peptide on columns of varying diameters (1mm to 9.4mm I.D.)

The present study examines the effect of reversed-phase high-performance liquid chromatography (RP-HPLC) column diameter (1mm to 9.4mm I.D.) on the one-step slow gradient preparative purification of a 26-residue synthetic antimicrobial peptide. When taken together, the semi-preparative column (9.4mm I.D.) provided the highest yields of purified product (an average of 90.7% recovery from hydrophilic and hydrophobic impurities) over a wide range of sample load (0.75-200mg). Columns with smaller diameters, such as narrowbore columns (150x2.1mm I.D.) and microbore columns (150x1.0mm I.D.), can be employed to purify peptides with reasonable recovery of purified product but the range of the crude peptide that can be applied to the column is limited. In addition, the smaller diameter columns require more extensive fraction analysis to locate the fractions of pure product than the larger diameter column with the same load. Our results show the excellent potential of the one-step slow gradient preparative protocol as a universal method for purification of synthetic peptides.

Quantitation of the nearest-neighbour effects of amino acid side-chains that restrict conformational freedom of the polypeptide chain using reversed-phase liquid chromatography of synthetic model peptides with L- and D-amino acid substitutions

Side-chain backbone interactions (or "effects") between nearest neighbours may severely restrict the conformations accessible to a polypeptide chain and thus represent the first step in protein folding. We have quantified nearest-neighbour effects (i to i+1) in peptides through reversed-phase liquid chromatography (RP-HPLC) of model synthetic peptides, where L- and D-amino acids were substituted at the N-terminal end of the peptide sequence, adjacent to a L-Leu residue. These nearest-neighbour effects (expressed as the difference in retention times of L- and D-peptide diastereomers at pHs 2 and 7) were frequently dramatic, depending on the type of side-chain adjacent to the L-Leu residue, albeit such effects were independent of mobile phase conditions. No nearest-neighbour effects were observed when residue i is adjacent to a Gly residue. Calculation of minimum energy conformations of selected peptides supported the view that, whether a L- or D-amino acid is substituted adjacent to L-Leu, its orientation relative to this bulky Leu side-chain represents the most energetically favourable configuration. We believe that such energetically favourable, and different, configurations of L- and D-peptide diastereomers affect their respective interactions with a hydrophobic stationary phase, which are thus quantified by different RP-HPLC retention times. Side-chain hydrophilicity/hydrophobicity coefficients were generated in the presence of these nearest-neighbour effects and, despite the relative difference in such coefficients generated from peptides substituted with L- or D-amino acids, the relative difference in hydrophilicity/hydrophobicity between different amino acids in the L- or D-series is maintained. Overall, our results demonstrate that such nearest-neighbour effects can clearly restrict conformational space of an amino acid side-chain in a polypeptide chain.

Elevated temperature and temperature programming in conventional liquid chromatography – fundamentals and applications

Temperature, as a powerful variable in conventional LC is discussed from a fundamental point of view and illustrated with applications from the author's laboratory. Emphasis is given to the influence of temperature on speed, selectivity, efficiency, detectability, and mobile phase composition (green chromatography). The problems accompanying the use of elevated temperature and temperature programming in LC are reviewed and solutions are described. The available stationary phases for high temperature operation are summarized and a brief overview of recent applications reported in the literature is given.

The perchlorate anion is more effective than the trifluoroacetate anion as an ion-pairing reagent for reversed-phase chromatography of peptides

The addition of salts, specifically sodium perchlorate (NaClO4), to mobile phases at acidic pH as ion-pairing reagents for reversed-phase high-performance liquid chromatography (RP-HPLC) has been generally overlooked. To demonstrate the potential of NaClO4 as an effective anionic ion-pairing reagent, we applied RP-HPLC in the presence of 0-100 mM sodium chloride (NaCl), sodium trifluoroacetate (NaTFA) or NaClO4 to two mixtures of synthetic 18-residue peptides: a mixture of peptides with the same net positive charge (+4) and a mixture of four peptides of +1, +2, +3 and +4 net charge. Interestingly, the effect of increasing NaClO4 concentration on increasing peptide retention times and selectivity changes was more dramatic than that of either NaCl or NaTFA, with the order of increasing anion effectiveness being Cl- << TFA- < C104-. Such effects were more marked when salt addition was applied to eluents containing 10 mM phosphoric acid (H3PO4) compared to 10 mM trifluoroacetic acid (TFA) due to the lesser starting anion hydrophobicity of the former mobile phase (containing the phosphate ion) compared to the latter (containing the TFA- ion).

Stereoselective peptide analysis

The stereochemistry of a peptide determines its spatial features and can profoundly influence its chemical properties and biological activity. Thus, the analysis of the stereochemical properties of a peptide is an important aspect of its characterisation. For such investigations a "selector" that engages in stereoselective interactions with the peptide analytes is often used. A substantiated knowledge of the underlying molecular recognition mechanism will therefore be helpful in understanding existing and developing new stereoselective analysis systems. After a short introduction concerning the fundamentals of peptide stereoisomers and their biological implications, the stereoselective peptide analysis methods described in the literature are comprehensively reviewed. The characteristics and applications of the employed methods based on various techniques including chromatography (pressure- and electrokinetically driven), capillary electrophoresis, nuclear magnetic resonance spectroscopy and mass spectrometry are discussed. The various selectors that have been utilised to discriminate peptide enantiomers and/or diastereomers are described concurrently. The review concludes with an overview of combinations and comparisons of techniques that have been applied to the analysis of peptide stereoisomers and constitute a trend for further developments.