Application of matrix solid-phase dispersion to the determination of polychlorinated biphenyls in fat by gas chromatography with electron-capture and mass spectrometric detection

Development of matrix solid-phase dispersion method for the extraction of short-chain chlorinated paraffins in human placenta

Chlorinated paraffins (SCCPs) are widely used worldwide, and they can be released into the environment during their production, transport, usage and disposal, which pose potential risks for human health. In this work, an efficient, reliable and rapid pretreatment method based on matrix solid-phase dispersion (MSPD) was developed for the analysis of short-chain CPs (SCCPs) in human placenta by gas chromatograph-electron capture negative ion low-resolution mass spectrometry (GC-ECNI-LRMS) and gas chromatography-quadrupole time-of-flight mass spectrometry (GC-QTOF-HRMS). The MSPD-relevant parameters including dispersing sorbent, sample-to-sorbent mass ratio, and elution solvent were optimized using the orthogonal test. Silica gel was found to be the optimal dispersing sorbent among the selected matrices. Under the optimal conditions, 44% acidic silica gel can be used as the co-sorbent to remove lipid and eluted by the mixture of hexane and dichloromethane (7:3, V/V). The spiked recoveries of the optimized method were 77.4% and 91.4% for analyzing SCCPs in human placenta by GC-ECNI-LRMS and GC-QTOF-HRMS, and the corresponding relative standard deviations were 10.2% and 5.6%, respectively. The method detection limit for the total SCCPs was 36.8ng/g (dry weight, dw) and 19.2ng/g (dw) as measured by GC-ECNI-LRMS and GC-QTOF-HRMS, respectively. The concentrations of SCCPs in four human placentas were in the range of <method detection limit (MDL) to 782ng/g (dw), which is also the first description of SCCPs detected in placentas.

Miniaturization of Analytical Methods

This chapter highlights miniaturization in sample preparation as a valuable alternative for green analytical chemistry. The current state of the art is discussed on the basis of examples selected from representative application areas, including biomedical, environmental and food analysis, and involving conventional instrumental techniques for final determination of the target compounds. The emphasis is on those techniques and approaches that have already demonstrated their practicality by the analysis of real-life samples, and in particular on those dealing with the accurate determination of minor organic components. The potential of recent developments in this field for sample treatment simplification and complete hyphenation of analytical processes are discussed and the most pressing remaining limitations evaluated.

Optimisation of a matrix solid-phase dispersion method for the determination of organophosphate compounds in dust samples

A fast and inexpensive sample preparation procedure based on the matrix solid-phase dispersion (MSPD) technique is proposed for the isolation of several organophosphate esters (mainly employed as flame retardants and plasticizers) from indoor dust samples. Extraction and clean-up were carried out in a single step and target compounds were determined by gas chromatography (GC) with nitrogen-phosphorus detection (NPD). The main parameters affecting extraction yield and selectivity, such as type and amount of dispersant material, clean-up co-sorbent and extraction solvent, were evaluated and optimised. Under final conditions, 0.5 g of dust were dispersed with equal amounts of anhydrous sodium sulphate and Florisil, and loaded on the top of a polypropylene cartridge containing 0.5 g of alumina. The dispersed sample was washed with 2 mL of n-hexane to remove the least polar interferences and analytes were eluted with 3 mL of acetone. Recoveries of the proposed method for spiked samples ranged from 80 to 116%, and the day-to-day variability remained between 5 and 10%. Data on levels of organophosphate species in dust from private houses and vehicle cabins are provided. In both cases, the lowest concentrations corresponded to the short chain, non-chlorinated, alkyl organophosphates, whereas mean values above 1 microg g(-1) were measured for the rest of analytes.

Sample handling strategies for the determination of persistent trace organic contaminants from biota samples

Even after emergence of most advanced instrumental techniques for the final separation, detection, identification and determination of analytes, sample handling continues to play a basic role in environmental analysis of complex matrices. In fact, sample preparation steps are often the bottleneck for combined time and efficiency in many overall analytical procedures. Thus, it is not surprising that, in the last two decades, a lot of effort has been devoted to the development of faster, safer, and more environment friendly techniques for sample extraction and extract clean up, prior to actual instrumental analysis. This article focuses on the state of the art in sample preparation of environmental solid biological samples dedicated to persistent organic pollutants (POPs) analysis. Extraction techniques such as Soxhlet extraction, sonication-assisted extraction, supercritical fluid extraction (SFE), microwave-assisted extraction (MAE), pressurised liquid extraction (PLE) and matrix solid-phase dispersion (MSPD) are reviewed and their most recent applications to the determination of POPs in biota samples are provided. Additionally, classical as well as promising novel extraction/clean-up techniques such as solid phase microextraction (SPME) are also summarized. Finally, emerging trends in sample preparation able to integrate analytes extraction and their adequate clean-up are presented.

Matrix solid-phase dispersion as a valuable tool for extracting contaminants from foodstuffs

This review updates our knowledge on matrix solid-phase dispersion (MSPD), a sample treatment procedure that is increasingly used for extracting/purifying contaminants from a variety of solid, semi-solid, viscous, and liquid foodstuffs. MSPD is primarily used because of its flexibility, selectivity, and the possibility of performing extraction and cleanup in one step, this resulting in drastically shortening of the analysis time and low consumption of toxic and expensive solvents. Technical developments and parameters influencing the extraction yield and selectivity are examined and discussed. Experimental results for the analysis of pesticides, veterinary drugs, persistent environmental chemicals, naturally occurring toxicants, and surfactants in food are reviewed.

Application of matrix solid-phase dispersion in the analysis of priority polycyclic aromatic hydrocarbons in fish samples

The performance of matrix solid-phase dispersion (MSPD) for the extraction of polycyclic aromatic hydrocarbons (PAHs) in fish tissue is described. The suitability of different solid supports was tested as well as the influence on the extraction efficiency of the natural fat content in samples. Under optimal conditions 0.6-0.8 g of tissue sample, are dispersed with 2 g of octadecylsiloxane (C18) and 0.5 g of anhydrous sodium sulphate and transferred to the top of a polyethylene solid-phase extraction cartridge which already contains 2 g of florisil and 1 g of C18. Cartridges were eluted with acetonitrile. The analysis of the extracts was carried out by high-performance liquid chromatography (HPLC) coupled with fluorescence detection. The proposed method provides detection limits between 0.04 and 0.32 ng/g for the different considered PAHs, below the maximum levels established by the some regulatory bodies for the six PAHs after recent oil spill episodes and European Union regulations. Recoveries over 80% were obtained for all compounds. Accuracy validation was carried out using the US National Institute of Standards and Technology (NIST) SRM 2977 reference material.

Simultaneous determination of thyreostatic residues in animal tissues by matrix solid-phase dispersion and gas chromatography–mass spectrometry

A method for determination of thyreostatic residues in animal tissues by matrix solid-phase dispersion (MSPD) and gas chromatography-mass spectrometry in selected ion detection mode was developed. Thyreostatic compounds in different matrices were extracted and purified by combination of MSPD and subsequent solid-phase extraction. Silica gel was selected as the solid support of both procedures and the conditions of the procedures were optimized. Thyreostats were derivatized with pentafluorobenzylbromide (PFBBr) in strong basic medium and then with N-methyl-N-(trimethylsilyl)-trifluoroacetamide (MSTFA), which can improve the yields of derivatization for thyreostats, the repeatability, and therefore the limits of detection (LOD) of thyreostats. The limits of detection reached 10 microg/kg (2-thiouracil, 6-methyl-2-thiouracil and 6-propyl-2-thiouracil), 20 microg/kg (6-phenyl-2-thiouracil) and 50 microg/kg (tapazole) with high recoveries (more than 70% for most of thyreostats) and relative standard deviations between 4.5% and 8.7%.

Development of a matrix solid-phase dispersion method for the screening of polybrominated diphenyl ethers and polychlorinated biphenyls in biota samples using gas chromatography with electron-capture detection

A low cost method for the screening of six polybrominated diphenyl ethers (PBDEs) and seven polychlorinated biphenyls (PCBs) in biological samples containing up to 100% of fat is presented. Compounds are extracted from the sample and isolated from lipids using a matrix solid-phase dispersion (MSPD) cartridge and 20 ml of n-hexane as elution solvent. PBDEs and PCBs are fractionated on a second cartridge containing 2 g of a normal phase sorbent. The potential of neutral silica, Florisil and basic alumina to separate PBDEs and PCBs in two independent fractions has been evaluated. The best results were obtained using silica. PCBs are eluted, in a first fraction, using n-hexane. PBDEs are further recovered with n-hexane-dichloromethane. The applicability of the method for the screening of PBDEs and PCBs, in samples containing both groups of compounds, has been demonstrated using spiked, certified and real polluted samples from different biota materials. Globally, recoveries higher than 75% and quantification limits around 0.4 ng/g have been achieved using gas chromatography with electron-capture detection (GC-ECD).