Phase system selectivity and two-dimensional separations in liquid column chromatography

Liquid chromatography at the university of pardubice: a tribute to Professor Pavel Jandera

Pavel Jandera was a world-leading analytical chemist who devoted his entire professional life to research in the field of high-performance liquid chromatography. During all his scientific career, he worked at the Department of Analytical Chemistry at the University of Pardubice, Czech Republic. His greatest contribution to the field of liquid chromatography was the introduction of a comprehensive theory of liquid chromatography with programmed elution conditions. He was also involved in the research of gradient elution techniques in preparative chromatography, modeling of retention and selectivity in various phase systems, preparation of organic monolithic microcolumns and, last but not least, in the development of theory and practical applications of two-dimensional liquid chromatography, mainly in the comprehensive form. In this review article, we have tried to capture the highlights of his scientific career and provide the readers with a detailed overview of Pavel Jandera's contribution to the evolution of separation sciences. This article is protected by copyright. All rights reserved.

Comprehensive two-dimensional liquid chromatography — practical impacts of theoretical considerations. A review

A theory of comprehensive two-dimensional separations by liquid chromatographic techniques is overviewed. It includes heart-cutting and comprehensive two-dimensional separation modes, with attention to basic concepts of two-dimensional separations: resolution, peak capacity, efficiency, orthogonality and selectivity. Particular attention is paid to the effects of sample structure on the retention and advantages of a multi-dimensional HPLC for separation of complex samples according to structural correlations. Optimization of 2D separation systems, including correct selection of columns, flow-rate, fraction volumes and mobile phase, is discussed. Benefits of simultaneous programmed elution in both dimensions of LCxLC comprehensive separations are shown.

Experimental setup, modulation of the fraction collection and transfer from the first to the second dimension, compatibility of mobile phases in comprehensive LCxLC, 2D asymmetry and shifts in retention under changing second-dimension elution conditions, are addressed. Illustrative practical examples of comprehensive LCxLC separations are shown.

Evaluation of the identification power of RPLC analyses in the screening for drug compounds

The identification of drugs of abuse is an important issue in forensic science. The main goal is to trace and identify as many drugs as possible in the shortest possible time preferably with a simple analysis method. One possibility is to screen samples using a Liquid Chromatography-Diode Array Detection (LC-DAD) system. However, when simultaneously performing another analysis on a chromatographic column exhibiting selectivity differences from the first one, that is, orthogonal or dissimilar columns, a greater number of drugs can be possibly identified without investing a lot of extra time or money. The primary difficulty is then selecting the most appropriate columns. In this paper, it is demonstrated that selecting the most dissimilar columns based on measures such as correlation or Snyder's F(s) value is not optimal, because these measures do not take into account the identification power of the individual systems. This implies that a large number of drugs may not necessarily be identified on the systems selected using these criteria. Therefore, three other measures are tested to evaluate the identification power obtained by parallel screening on two columns or by comprehensive two-dimensional LC (LC x LC). The simplest approach is counting the number of compounds separable with a difference in retention time greater than a predefined critical value. However, this measure does not reflect the coelution pattern of the unidentified drugs nor the separation degree of all compounds. The second tested measure, information, enables differentiation between systems identifying the same number of compounds but resulting in a different coelution pattern. Multivariate selectivity, the third tested parameter, takes into account the degree of separation of all compounds and has the advantage that it reflects the gain in identification power achieved by introducing DAD data. All three proposed measures also enable evaluation of whether the corresponding LC x LC method will result in a greater identification power.

Stationary phases for hydrophilic interaction chromatography, their characterization and implementation into multidimensional chromatography concepts

Hydrophilic interaction chromatography (HILIC) is becoming increasingly popular for separation of polar samples on polar columns in aqueous-organic mobile phases rich in organic solvents (usually ACN). Silica gel with decreased surface concentration of silanol groups, or with chemically bonded amino-, amido-, cyano-, carbamate-, diol-, polyol-, or zwitterionic sulfobetaine ligands are used as the stationary phases for HILIC separations, in addition to the original poly(2-sulphoethyl aspartamide) strong cation-exchange HILIC material. The type of the stationary and the composition of the mobile phase play important roles in the mixed-mode HILIC retention mechanism and can be flexibly tuned to suit specific separation problems. Because of excellent mobile phase compatibility and complementary selectivity to RP chromatography, HILIC is ideally suited for highly orthogonal 2-D LC-LC separations of complex samples containing polar compounds, such as peptides, proteins, oligosaccharides, drugs, metabolites and natural compounds. This review attempts to present an overview of the HILIC separation systems, possibilities for their characterization and emerging HILIC applications in 2-D off-line and on-line LC-LC separations of various samples, in combination with RP and other separation modes.

Stationary phase characterization and method development

The properties of stationary phases and their characterization methods are reviewed. New and significant developments have occurred in the last few years, and new methods for stationary phase characterization have become available. The characterization methods are discussed, and the differences between the different methods are pointed out. In addition, method development approaches are reviewed, with special emphasis on recent developments that employ multiple parameters in parallel. Also, the renewed interest of temperature as a tool in method development is surveyed.

Can the theory of gradient liquid chromatography be useful in solving practical problems?

Advances in the theory of gradient liquid chromatography and their practical impacts are reviewed. Theoretical models describing retention in reversed-phase, normal-phase and ion-exchange modes are compared. Main attention is focused on practically useful models described by two- or three-parameter equations fitting the experimental data in the range of mobile phase composition utilized for sample migration during gradient elution. The applications of theory for gradient method development, optimization and transfer are addressed. The origins and possibilities for overcoming possible pitfalls are discussed, including the effects of the instrumental dwell volume, uptake of mobile phase components on the column and size of the sample molecules. Special attention is focused on gradient separations of large molecules.

Column selectivity for two-dimensional liquid chromatography

Selectivity of phase system is of primary concern when designing a 2-D separation, as it affects the 2-D system orthogonality and consequently the peak capacity controlling the number of peaks that can be separated in the available 2-D retention space limited by the time of analysis. Possibilities for characterization of LC phase system selectivity with respect to different polar and nonpolar structural units are compared, with special attention to multidimensional samples with various types of repeat groups, such as homopolymers, (co)polymers, fatty acid esters with various acyl lengths and number and position of double bonds, etc. Possibilities of the 2-D LC separations of these and other sample types, including pharmaceuticals, natural phenolic compounds, biopolymers, etc., using various combinations of separation modes are reviewed. Rules for design of comprehensive 2-D LC x LC systems are discussed, with respect to mobile phase compatibility in the two systems and modulation techniques suppressing band broadening connected with the sample fraction transfer from the first to the second dimension. Pitfalls connected with online connection of normal-phase and RP LC systems and their possible practical solutions are addressed and illustrated by practical examples.

Two-dimensional liquid chromatography normal-phase and reversed-phase separation of (co)oligomers

Many samples contain compounds with various numbers of two or more regular structural groups. Such "multidimensional" samples (according to the Giddings' notation) are best separated in orthogonal chromatographic systems with different selectivities for the individual repeat structural groups, described by separation factors. Correlations between the repeat group selectivities characterize the degree of orthogonality and suitability of chromatographic systems for two-dimensional (2D) separations of two-dimensional samples. The range of the structural units in that can be resolved in a given time can be predicted on the basis of a model describing the repeat group selectivity in the first- and second-dimension systems. Two-dimensional liquid chromatographic system combining reversed-phase (RP) mode in the first dimension and normal-phase (NP) mode in the second dimension were studied with respect to the possibilities of in-line fraction transfer between the two modes. Hydrophilic interaction liquid chromatography (HILIC) with an aminopropyl silica column (APS) is more resistant than classical non-aqueous NP systems against adsorbent desactivation with aqueous solvents transferred in the fractions from the first, RP dimension to the second dimension. Hence, HILIC is useful as a second-dimension separation system for comprehensive RP-NP LCxLC. A comprehensive 2D RP-NP HPLC method was developed for comprehensive 2D separation of ethylene oxide-propylene oxide (EO-PO) (co)oligomers. The first-dimension RP system employed a 120 min gradient of acetonitrile in water on a C18 microbore column at the flow-rate of 10 microL/min. In the second dimension, isocratic HILIC NP with ethanol-dichloromethane-water mobile phase on an aminopropyl silica column at 0.5 mL/min was used. Ten microliter fractions were transferred from the RP to the HILIC NP system at 1 min switching valve cycle frequency.

Solvent and temperature gradients in separation of synthetic oxyethylene-oxypropylene block (co)polymers using high-temperature liquid chromatography

Chromatographic behavior of synthetic block (co)oligomer samples (EO)n(PO)m(EO)n and (PO)n(EO)m(PO)n with different distribution of propylene oxide (PO) and ethylene oxide (EO) monomer units was investigated on three types of stationary phases on zirconium dioxide support: Zr-PS (polystyrene), Zr-carbon, and Zr-carbon C18. The effects of the distribution and sequence of the oxyethylene and oxypropylene monomer units on the chromatographic retention depend on the type of the stationary phase, but are strongly affected by the organic modifier (methanol or ACN) in aqueous-organic mobile phase. Special attention was focused on the influence of the mobile-phase composition on the separation according to the EO and PO distribution. Zirconia-based columns are stable at elevated temperatures and can be used in high-temperature LC (HTLC); hence, we investigated the temperature effects on the chromatographic behavior up to 90 degrees C. The applications of solvent and temperature gradients were compared on the zirconia stationary phases in the RP mode.

Two-dimensional and serial column reversed-phase separation of phenolic antioxidants on octadecyl-, polyethyleneglycol-, and pentafluorophenylpropyl-silica columns

The separation selectivity of octadecyl-silica (C18) and of bonded pentafluorophenylpropyl-silica (F5) and PEG-silica columns was compared for natural phenolic antioxidants. The separation selectivities for phenolic antioxidants on C18 and F5 columns are strongly correlated, but low selectivity correlation indicating strong differences in the retention mechanism was observed between the C18 and PEG columns. Hence, the combination of a C18 and a PEG column is useful for separation of phenolic antioxidants that are not fully separated on single columns. Two-dimensional comprehensive liquid chromatography using a short PEG-silica column in the first dimension and a conventional C18-silica in the second dimension has the advantage of on-column focusing of the fractions transferred onto the C18 column in the second dimension, as a weaker mobile phase is used in the first dimension than in the second dimension. However, a stop-flow set-up in the first dimension system is necessary after the transfer of each fraction to the second dimension. Peak capacity is considerably larger but the separation time is much longer than with serially coupled PEG and C18 columns, which were employed for separation of beer and hop extract samples in connection with coulometric detection.