In-tube solid-phase microextraction-capillary liquid chromatography as a solution for the screening analysis of organophosphorus pesticides in untreated environmental water samples

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Innovations in Extractive Phases for In-Tube Solid-Phase Microextraction Coupled to Miniaturized Liquid Chromatography: A Critical Review

Over the past years, a great effort has been devoted to the development of new sorbents that can be used to pack or to coat extractive capillaries for in-tube solid-phase microextraction (IT-SPME). Many of those efforts have been focused on the preparation of capillaries for miniaturized liquid chromatography (LC) due to the reduced availability of capillary columns with appropriate dimensions for this kind of system. Moreover, many of the extractive capillaries that have been used for IT-SPME so far are segments of open columns from the gas chromatography (GC) field, but the phase nature and dimensions are very limited. In particular, polar compounds barely interact with stationary GC phases. Capillary GC columns may also be unsuitable when highly selective extractions are needed. In this work, we provide an overview of the extractive capillaries that have been specifically developed for capillary LC (capLC) and nano LC (nanoLC) to enhance the overall performance of the IT-SPME, the chromatographic separation, and the detection. Different monolithic polymers, such as silica C₁₈ and C₈ polymers, molecularly imprinted polymers (MIPs), polymers functionalized with antibodies, and polymers reinforced with different types of carbon nanotubes, metal, and metal oxide nanoparticles (including magnetic nanoparticles), and restricted access materials (RAMs) will be presented and critically discussed.

Determination of organophosphorus pesticides using dispersive liquid-liquid microextraction combined with reversed electrode polarity stacking mode-micellar electrokinetic chromatography

A rapid and sensitive method using two preconcentration techniques, dispersive liquid-liquid microextraction (DLLME) followed by reversed electrode polarity stacking mode (REPSM) was developed for the analysis of five organophosphorus pesticides (OPPs) by micellar electrokinetic chromatography (MEKC). Parameters that affect the efficiency of the extraction in DLLME and preconcentration by REPSM, such as the kind and volume of the extraction and disperser solvents, salt addition, sample matrix and injection time were investigated and optimized. Under the optimum conditions, the enrichment factors were obtained in the range from 477 to 635. The linearity of the method for parathion, azinphos and fenitrithion was in the range of 20-1000 ng mL(-1), and for malathion and diazinon in the range of 50-1000 ng mL(-1), with correlation coefficients (r(2)) ranging from 0.9931 to 0.9992. The limits of detecton (LODs) at a signal-to-noice ratio of 3 ranged from 3 to 15 ng mL(-1). The relative recoveries of five OPPs from water samples at spiking levels of 20 and 200 ng mL(-1) for parathion, azinphos and fenitrithion, and 50 and 500 ng mL(-1) for malathion and diazinon, were 69.5-103%. The proposed method provided high enrichment factors, good precision and accuracy with a short analysis time.

Occurrence of priority pollutants in WWTP effluents and Mediterranean coastal waters of Spain

A comprehensive study aimed at evaluating the occurrence, significance of concentrations and spatial distribution of priority pollutants (PPs) along the Comunidad Valenciana coastal waters (Spain) was carried out in order to fulfil the European Water Framework Directive (WFD). Additionally, PP concentrations were also analysed in the effluent of 28 WWTPs distributed along the studied area. In coastal waters 36 organic pollutants of the 71 analysed, including 26 PPs were detected although many of them with low frequency of occurrence. Only 13 compounds, which belong to four different classes (VOCs, organochlorinated pesticides, phthalates and tributyltin compounds (TBT)) showed a frequency of occurrence above 20% in coastal waters. In the results obtained until now, octylphenol, pentachlorobenzene, DEHP and TBT exceeded the annual average concentration (EQS-AAC), and only TBT surpassed the maximum allowable concentration (EQS-MAC). The most frequent contaminants determined in coastal waters were also present in WWTP effluents.

Enantiomeric discrimination and quantification of the chiral organophosphorus pesticide fenamiphos in aqueous samples by a novel and selective ³¹P nuclear magnetic resonance spectroscopic method using cyclodextrins as chiral selector

A rapid, selective, and accurate quantitative ³¹P nuclear magnetic resonance (³¹P NMR) spectroscopy method was used for the chiral recognition of the racemic organophosphorus pesticide fenamiphos using chiral solvating agents (CSAs). Six neutral cyclodextrins (CDs) (α-CD, β-CD, methyl-β-CD, hydroxyethyl-β-CD, hydroxypropyl-β-CD, and hydroxypropyl-γ-CD) and two anionic CDs (carboxymethyl-β-CD and carboxyethyl-β-CD) were selected for these experiments. The shift displacement values (Δδ), after addition of each of the eight CDs in the highest possible molar ratio to a guest, were recorded. The results showed that β-CD and hydroxypropyl-β-CD were the best chiral solvating agents for the enantiomeric discrimination of fenamiphos. Two-dimension rotating frame nuclear Overhauser spectroscopy (ROESY) was used to investigate the structure of the β-CD-fenamiphos inclusion complex in aqueous solution. To determine the fenamiphos enantiomers, a calibration curve was drawn for two enantiomers over the range of 0.05-0.25 mg mL⁻¹. The limits of detection (S/N = 3) were obtained as 0.0068 and 0.0060 mg mL⁻¹ for fenamiphos enantiomers. The recovery studies were performed on aqueous real samples ranging from 94 to 107% with coefficients of variation of ≤ 9%.

Dissipation of insecticides in a Mediterranean soil in the presence of wastewater and surfactant solutions. A kinetic model approach

The simultaneous disappearance of four organophosphorous insecticides in a Mediterranean calcareous soil was evaluated in the presence of surfactant solutions and municipal wastewater. A cationic, an anionic and a non-ionic surfactant were used at a low (0.75 mg L(-1)) and at a high (twice the critical micelle concentration) concentration level. The cationic surfactant was also studied at a higher concentration. Dissipation in control soil was rapid for malathion (half-life 4 days), intermediate for dimethoate and methidathion (ca. 6 days) and slow for diazinon (29 days). Wastewater did either not modify (diazinon, dimethoate and methidathion) or slightly enhance (malathion) insecticide decay. The increase in concentration of the non-ionic surfactant Tween 80 resulted in enhanced dissipation rates for all the pesticides except diazinon. The addition of the anionic surfactant did not show a clear trend. At the highest cationic surfactant concentration a reduction of pesticide disappearance occurred linked with a reduced availability, since the insecticides were retained on the surfactant-modified soil (final residual concentration of 85% for diazinon and approximately 55% for methidathion and dimethoate). Soil microbial activity, estimated by measuring dehydrogenase activity, was low in wastewater- and surfactant-treated soil at the high levels. Fitting of the experimental data to commonly used mathematical models was poor and alternatives were looked for.