Recent studies of the electrospray ionisation behaviour of selected drugs and their application in capillary electrophoresis–mass spectrometry and liquid chromatography–mass spectrometry

Liquid chromatography-high-resolution mass spectrometry analysis of erectile dysfunction drugs and their analogues in food products

The presence of erectile dysfunction (ED) drugs in adulterated dietary supplements, mainly in pharmaceutical dosage forms, is frequently addressed in the literature. Little attention is given to food products despite their increasing adulteration trend. To address this knowledge gap targeted, suspected-target, and non-targeted strategies were utilised to analyse ED drugs and their analogues in powdered drink mix (PDM), honey, jelly, hard candy, and sugar-coated chewing gum using liquid chromatography-high-resolution mass spectrometry (LC-HRMS). The method was optimised and validated using 23 target analytes, representing different ED drugs with structural similarities. The modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction exhibited insignificant matrix effect (ME) within - 9.2-8.8% and provided complete coverage of target analytes with acceptable extraction recovery (RE) within 75.5-123.9%, except for carbodenafil in the PDM matrix. Based on the ME and RE performance, the analytical method was validated to analyse 25 food samples that claimed to enhance male sexual performance. The method exhibited good specificity and linearity with a limit of detection within 10-70 ng/mL and limit of quantification of 80 ng/mL. Similarly, the accuracy and precision were satisfactory within 77.4-122.0% and< 16.7%RSD, respectively. The LC-HRMS targeted analysis, together with suspected-target and non-targeted screenings, identified and detected ten ED drugs from 24 food samples. The modified QuEChERS extraction with LC-HRMS-based method was demonstrated to be universally applicable to various food products, covering an extensive range of known and potentially novel ED drugs, which is valuable for routine casework.

The function and performance of aqueous aerosol devices for inhalation therapy

OBJECTIVES

In this review paper, we explore the interaction between the functioning mechanism of different nebulizers and the physicochemical properties of the formulations for several types of devices, namely jet, ultrasonic and vibrating-mesh nebulizers; colliding and extruded jets; electrohydrodynamic mechanism; surface acoustic wave microfluidic atomization; and capillary aerosol generation.

KEY FINDINGS

Nebulization is the transformation of bulk liquids into droplets. For inhalation therapy, nebulizers are widely used to aerosolize aqueous systems, such as solutions and suspensions. The interaction between the functioning mechanism of different nebulizers and the physicochemical properties of the formulations plays a significant role in the performance of aerosol generation appropriate for pulmonary delivery. Certain types of nebulizers have consistently presented temperature increase during the nebulization event. Therefore, careful consideration should be given when evaluating thermo-labile drugs, such as protein therapeutics. We also present the general approaches for characterization of nebulizer formulations.

SUMMARY

In conclusion, the interplay between the dosage form (i.e. aqueous systems) and the specific type of device for aerosol generation determines the effectiveness of drug delivery in nebulization therapies, thus requiring extensive understanding and characterization.

Compatibility of highly sulfated cyclodextrin with electrospray ionization at low nanoliter/minute flow rates and its application to capillary electrophoresis/electrospray ionization mass spectrometric analysis of cathinone derivatives and their optical isomers

RATIONALE

Sodium salts of cyclodextrins are commonly used in capillary electrophoresis/mass spectrometry (CE/MS) analysis of illicit drugs and their optical isomers. To avoid the suppression effect of cyclodextrins under electrospray ionization (ESI), the partial filling technique (PFT) is commonly utilized, which has a limited resolution. Low-flow nano-ESI has been shown to reduce the suppression effect of the salts. To test the compatibility of low-flow ESI with a background electrolyte (BGE) containing sodium salts of cyclodextrin, sheathless narrow capillary CE/MS with flow rates of low nanoliters/minute (nL/min) was applied to the separation and detection of cathinones and their positional and optical isomers for the first time.

METHODS

Low-flow sheathless CE/MS using a 20-µm-i.d. capillary in conjunction with a porous tip interface was used for the separation of cathinone derivatives and their optical isomers. Highly sulfated γ-cyclodextrin (HS-γ-CD) in conjunction with (+)-18-crown-6-tetracarboxylic acid ((+)-18-C-6-TCA) was used as the BGE and an ion trap mass spectrometer operating in full scan mode was utilized.

RESULTS

Utilizing low flow rate (~10 nL/min) sheathless CE/MS, the use of the sodium salt of HS-γ-CD as the BGE was compared with the same solution using PFT. The relative and absolute sensitivity of detection of cathinones were about the same, indicating that under low-flow sheathless CE/MS there was no significant suppression due to the existence of HS-γ-CD in the electrospray process. However, enhanced resolution of cathinone derivatives and their positional and optical isomers was observed when the solution of HS-γ-CD was used as the BGE. The enhanced resolution was because of the presence of the HS-γ-CD in the entire capillary during the analysis. The addition of 15 mM (+)-18-C-6-TCA to the BGE containing HS-γ-CD further enhanced the resolution resulting in separation of all cathinones and their positional and optical isomers.

CONCLUSIONS

A novel CE/MS technique has been introduced that combines low-flow sheathless CE/MS, with HS-γ-CD and 15 mM (+)-18-C-6-TCA as the BGE for separation of cathinone derivatives as well as their positional and optical isomers.

Analysis of free nucleotide monophosphates in human milk and effect of pasteurisation or high-pressure processing on their contents by capillary electrophoresis coupled to mass spectrometry

A simple, efficient and green analytical method for the determination of free nucleotide monophosphates in human milk is proposed. It involves centrifugal ultrafiltration (CUF) as sample treatment and capillary electrophoresis-electrospray mass spectrometry (CE-ESI-MS) for separation and simultaneous quantification. The optimised method, applied to the analysis of human milk samples, included their dilution (1:5) with water followed by CUF treatment. No matrix effects were found. The method provided limits of detection between 0.08 and 0.13 μg mL(-1) and limits of quantification between 0.26 and 0.43 μg mL(-1). The intralaboratory repeatability and reproducibility afforded relative standard deviation values lower than 10%. The method was applied to the study of the effects of Holder pasteurisation and high-pressure processing on the nucleotide contents in samples from a human milk bank. The results showed concentration values between 0.5 and 10 μg mL(-1), with higher concentrations for the samples treated by pasteurisation. The effect of freezing time on the content of nucleotides was also assessed.

Mass spectrometric analysis of pharmaceutical adulterants in products labeled as botanical dietary supplements or herbal remedies: a review

The increased availability and use of botanical dietary supplements and herbal remedies among consumers has been accompanied by an increased frequency of adulteration of these products with synthetic pharmaceuticals. Unscrupulous producers may add drugs and analogues of various classes, such as phosphodiesterase type 5 (PDE-5) inhibitors, weight loss, hypoglycemic, antihypertensive and anti-inflammatory agents, or anabolic steroids, to develop or intensify biological effects of dietary supplements or herbal remedies. The presence of such adulterated products in the marketplace is a worldwide problem and their consumption poses health risks to consumers. Analytical methods that allow rapid and reliable testing of dietary supplements for the presence of synthetic drugs are needed to address such fraudulent practices. Mass spectrometry (MS) and hyphenated techniques such as liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) have become primary tools in this endeavor. The present review critically assesses the role and summarizes the applications of MS in the analysis of pharmaceutical adulterants in botanical dietary supplements and herbal remedies. The uses of MS techniques in detection, confirmation, and quantification of known pharmaceutical adulterants as well as in screening for and structure elucidation of unexpected adulterants and novel designer drugs are discussed.

LC/UV determination of cefradine, cefuroxime, and cefotaxime in dairy milk, human serum and wastewater samples

Cephalosporins type antibiotics are widely used to treat infectious diseases. Their determination is not only important in blood/serum of patients under treatment but also in diverse matrices like wastewaters, milk etc. as contaminant. Keeping in view the need, a new high performance liquid chromatographic method for the determination of three cephalosporins (cefradine, cefuroxime and cefotaxime) has been developed. Separation was performed on an ODS column with binary solvent elution of aqueous formic acid (0.05%) and methanol in the ratio of 45: 55 (v/v) at a flow rate of 1 mL min^-1 and UV detection at 260 nm. Under optimised conditions, all three cephalosporins were baseline separated within 5 min. Linear responses for cefradine 5–20 μg mL^-1, cefuroxime 0.5-15 μg mL^-1 and cefotaxime 1.0-20 μg mL^-1 were established. LOD of 0.05-0.25 μg mL^-1 after preconcentration was achieved. The method was applied to serum samples of patients under treatment with these antibiotics and to screen the selected cephalosporins from hospital wastewater and milk samples. Moreover, method was applied to study stability of aqueous solutions and acid/base induced degradation of all three drugs.

Multivariate optimization of capillary electrophoresis methods: a critical review

In this article a review on the recent applications of multivariate techniques for optimization of electromigration methods, is presented. Papers published in the period from August 2007 to February 2013, have been taken into consideration. Upon a brief description of each of the involved CE operative modes, the characteristics of the chemometric strategies (type of design, factors and responses) applied to face a number of analytical challenges, are presented. Finally, a critical discussion, giving some practical advices and pointing out the most common issues involved in multivariate set-up of CE methods, is provided.

Ionization techniques in capillary electrophoresis-mass spectrometry: principles, design, and application

A major step forward in the development and application of capillary electrophoresis (CE) was its coupling to ESI-MS, first reported in 1987. More than two decades later, ESI has remained the principal ionization technique in CE-MS, but a number of other ionization techniques have also been implemented. In this review the state-of-the-art in the employment of soft ionization techniques for CE-MS is presented. First the fundamentals and general challenges of hyphenating conventional CE and microchip electrophoresis with MS are outlined. After elaborating on the characteristics and role of ESI, emphasis is put on alternative ionization techniques including sonic spray ionization (SSI), thermospray ionization (TSI), atmospheric pressure chemical ionization (APCI), atmospheric pressure photoionization (APPI), matrix-assisted laser desorption ionization (MALDI) and continuous-flow fast atom bombardment (CF-FAB). The principle of each ionization technique is outlined and the experimental set-ups of the CE-MS couplings are described. The strengths and limitations of each ionization technique with respect to CE-MS are discussed and the applicability of the various systems is illustrated by a number of typical examples.

Application of different modes of thin-layer chromatography and mass spectrometry for the separation and detection of large and small biomolecules

Biomolecules are widespread throughout the world. A biomolecule is any organic molecule produced by a living organism, including large polymeric molecules such as proteins, polysaccharides and nucleic acids. Many sample preparation techniques are used in biomolecule analysis; the method selected depends on the complexity of the sample, the nature of the matrix and the analytes, and the analytical technique available. This review covers the current state of knowledge on thin-layer chromatography and mass spectrometry for qualitative analysis of biomolecules. In the first part of the paper the reader will gain useful information to avoid some problems about performing various modes of thin-layer chromatography combined with mass spectrometry experiments and in the second part he will find useful information for application of these techniques for separation, detection, and qualitative investigation of structures and quantitative determination of biomolecules such as proteins, peptides, oligonucleotides, amino acids, DNA, RNA, and lipids.

Electron ionization mass spectral study of oxo- and thio derivatives of minor tobacco alkaloids

The electron-ionization mass spectra (EI-MS) of oxo- and thio-derivatives of minor tobacco alkaloids and structurally similar piperidine alkaloids, i.e. thiocotinine (1), 2'-oxo-N-methylanabasine (2), 2'-thio-N- methylanabasine (3), 2'-oxoanabasamine (4) and 2'-thioanabasamine (5) are discussed and general fragmentation routes of their molecular cations are proposed. Comparison of the data obtained for 1 with the EI-MS data of metameric metabolites of nicotine: 3'-hydroxycotinine, (A) and 5'-hydroxycotinine, (B) allows a differentiation between these metamers. The data will be useful for the identification of metabolites of alkaloids of these types in biological matrices.

Synthesis of novel dendrimers having aspartate grafts and their ability to enhance the aqueous solubility of model drugs

In this study, a series of aspartate based dendrimers with different cores were synthesized in a convergent approach and well characterized by NMR and MS techniques. The aqueous solubility of the model drugs (L-Histidine, Naproxen, Methotrexate) was measured in the presence of this kind of dendrimers at room temperature in PBS buffers at pH 6, 7 and 8. Results clearly confirmed that the solubility enhancement was due to presence of dendrimers at different pH compared to their corresponding aqueous solubility at different pH. The results indicated that the aspartate based dendrimers could be considered as an effective supplement of PAMAM dendrimers in solubility enhancement and drug delivery. The surface groups played an important role in dendrimer-mediated solubility enhancement.

Advanced CE for chiral analysis of drugs, metabolites, and biomarkers in biological samples

An analysis of recent trends indicates that CE can show real advantages over chromatographic methods in ultratrace enantioselective determination of biologically active compounds in complex biological matrices. It is due to high separation efficiency and many applicable in-capillary electromigration effects in CE (countercurrent migration, stacking effects) enhancing significantly (enantio)separability and enabling effective sample preparation (preconcentration, purification, analyte derivatization). Other possible on-line combinations of CE, such as column coupled CE-CE techniques and implementation of nonelectrophoretic techniques (extraction, membrane filtration, flow injection) into CE, offer additional approaches for highly effective sample preparation and separation. CE matured to a highly flexible and compatible technique enabling its hyphenation with powerful detection systems allowing extremely sensitive detection (e.g. LIF) and/or structural characterization of analytes (e.g. MS). Within the last decade, more as well as less conventional analytical on-line approaches have been effectively utilized in this field and their practical potentialities are demonstrated on many new application examples in this article. Here, three basic areas of (enantioselective) drug bioanalysis are highlighted and supported by a brief theoretical description of each individual approach in a compact review structure (to create integrated view on the topic), including (i) progressive enantioseparation approaches and new enantioselective agents, (ii) in-capillary sample preparation (preconcentration, purification, derivatization), and (iii) detection possibilities related to enhanced sensitivity and structural characterization.

The application of CE-MS in the trace analysis of environmental pollutants and food contaminants

In this review, selected applications of CE-MS in recent years have been highlighted for the separation, detection and determination of environmental pollutants and food contaminants in selected samples. Trace analysis by CE-MS of analytes such as low molecular mass amines, nitroaromatics, alkylphosphonic acids, azo dyes, antidepressants, and antibiotic drugs, among others, in air, sediment and water samples have been reviewed. The CE-MS analysis of pesticides such as triazolopyrimidine sulphoanilides, different types of antibiotics (sulphonamides, beta-lactones, quinolones and tetracyclines) and other exogenous compounds such as acrylamide and toxic oligopeptides in food samples has also been reviewed. The review gives details on the fragmentations, where available, that the ionic species exhibit in-source and in ion trap, triple quadrupole and ToF MS analysers. A critical evaluation is also given of these recent CE-MS analytical methods for the separation, detection and determination of trace levels of such pollutants and contaminants with analytical information on the treatment of the samples, CE separation conditions, linearity ranges, LODs and recoveries from the different matrices presented.

A new insight into suction and dilution effects in capillary electrophoresis coupled to mass spectrometry via an electrospray ionization interface. Part I-Suction effect

The hyphenation of CE with MS is nowadays accepted as a powerful analytical approach. Employing ESI, the most common interface, one challenge is to provide quantitative information, which is quite a difficult task, as it is linked, among other factors, to suction and dilution effects. In the coaxial ESI configuration, the suction effect has been presented in literature as stemming from nebulizing gas (NG) flow rate and drying gas temperature. But as this interface consists in three concentric capillaries, allowing for BGE, sheath liquid (SL) and NG mixing, it is demonstrated herein that other parameters are also involved in this suction effect: the CE capillary protrusion from the interface needle, SL flow rate, and overall BGE flow rate and velocity profile. Whereas NG flow rate is the parameter affecting suction to a greater extent, separation capillary protruding length, SL, and overall BGE flow rate have a significant additional impact on this phenomenon. It is shown that SL flow rate can affect suction differently according to the NG velocity, which may be explained by modification of the Taylor cone geometry. Furthermore, it appears that suction effect is noticeably favored by a parabolic velocity profile of the BGE, again probably due to the Taylor cone shape modification. Finally, the temperature gradient created by the contact between the heated NG and the separation capillary enhances this effect.