Preparation and evaluation of hydroxylated poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolithic capillary for in-tube solid-phase microextraction coupled to high-performance liquid chromatography

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Enantioseparation of propranolol, amlodipine and metoprolol by electrochromatography using an open tubular capillary modified with β-cyclodextrin and poly(glycidyl methacrylate) nanoparticles

The inner wall of a capillary was coated with glycidyl methacrylate (GMA) to form tentacle-type coating, and poly(glycidyl methacrylate) nanoparticles (PGMA NPs) were then immobilized on the film. Ethanediamine-β-cyclodextrin as chiral selector was covalently bonded into the PGMA NPs through the ring-open reaction. The materials were characterized by SEM, TEM and FT-IR. The modified column was applied to the enantioseparation of the racemates of propranolol, amlodipine and metoprolol. Compared to a capillary with a single layer of CD-PGMA (without GMA coating) and to a CD-GMA system (without PGMA nanoparticles), the performance of the capillary is strongly improved. The effects of buffer pH value and applied voltage were optimized. Best resolutions (propranolol: 1.27, metoprolol: 1.01 and amlodipine: 2.93) were obtained when using the PGMA-coated capillary system. The run-to-run, day-to-day and column-to-column reproducibility were tested and found to be highly attractive. The new stationary phase is likely to have a large potential and scope in that it may also be applied to chiral separations of other enantiomers, such as amino acids and biogenic amines. Graphical abstract Schematic presentation of the preparation of a capillary column with glycidyl methacrylate (GMA) coating which was then immobilized with poly(glycidyl methacrylate) nanoparticles and ethanediamine-β-cyclodextrin. This novel open tubular column was applied to construct capillary electrochromatography system for separation of basic racemic drugs.

A comparative study of extractant and chromatographic phases for the rapid and sensitive determination of six phthalates in rainwater samples

Six phthalic acid esters were determined in rainwater samples, from which a very low sample volume was collected. This method combines on-line in-tube solid-phase microextraction coupled to high-performance liquid chromatography with a diode-array detector. In order to obtain a short analysis time and to reduce the consumption of organic solvents, two chromatographic phases (C18 monolithic and cyanopropyl silica) are compared. Although three critical pairs are found, faster separation, good resolution and lower pressures are achieved using C18 monolithic column. In order to achieve a simple and sensitive method, two commercial capillaries (a porous polymer with divinylbenzene-4-vinylpyridine and a liquid-phase capillary with 95% poly(dimethylsiloxane)-5% poly(diphenylsiloxane)) are tested for the extraction process. Due to great differences of hydrophobicity among the six phthalates, the selection of a modifier is necessary for a good extraction. The best conditions are achieved using 5 mL of sample containing 40% methanol in a 70 cm-long porous polymer capillary. The procedural blanks are controlled and taken into account in the calculation of the detection limits. Except for dimethylphthalate, the method detection limits are in the range from 0.2 to 0.9 ng mL^-1 and the inter-day precision is between 5.3% and 12.5%. The recoveries were within the range of 71%-101%. Rainwater samples are analyzed in order to examine the dilution effect and washout of phthalates in the atmosphere. Dibutyl phthalate is the predominant phthalate found and di-(2-ethylhexyl) phthalate is detected in all analyzed samples.

One-pot synthesis of polymer monolithic column by combination of free radical polymerization and azide–alkyne cycloaddition “click” reaction and its application in capillary liquid chromatography

A facile “one-pot” method was developed for the preparation of polymer monoliths by combination of free radical polymerization and CuAAC click reaction.

Preparation of a poly(3′-azido-3′-deoxythymidine-co-propargyl methacrylate-co-pentaerythritol triacrylate) monolithic column by in situ polymerization and a click reaction for capillary liquid chromatography of small molecules and proteins

Combining free radical polymerization with a CuAAC click reaction, a facile approach was developed for the preparation of poly(AZT-co-PMA-co-PETA) monoliths.

Preparation of sub-micron skeletal monoliths with high capacity for liquid chromatography

A novel kind of poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)-based monolithic column was developed for LC by directing supramolecular self-assembly of high internal phase emulsion. Mercury intrusion porosimetry characterization and scanning electron microscope pictures showed that these monoliths presented micrometer-sized throughpores, unique sub-micron skeletons and relatively large specific surface area. Additionally, porosity of monoliths could be adjusted while skeletons remained in the size range of 100.0-1000.0 nm. The new monoliths demonstrated not only better column efficiency, but also larger binding capacity. Dynamic binding capacity for protein (BSA) was evaluated to be 42.5 mg/mL, above two times higher than that of the general monoliths (19.1 mg/mL) and higher than that of commercial "Convective Interaction Media" monolithic columns (30.0 mg/mL). Moreover, their chromatographic behaviors were also evaluated in detail by chemical stability and swelling characterization of the monolithic column. Separation of proteins mixture (cytochrome c, myoglobin, ribonuclease A, lysozyme and BSA) on the monolith was achieved within 4 min at velocity of 1440.0 cm/h. Those unique properties made the novel monolithic column a promising alternative to commercially available monolithic supports in LC applications.