Post-column reactor of coaxial-gap mode for laser-induced fluorescence detection in capillary electrophoresis

Developments in on-line, post separation sample manipulation in the last 22 years: Pharmaceutical and biomedical applications

On-line post separation sample manipulation is a powerful approach increasing the sensitivity and selectivity in chemical analysis. Post separation sample manipulation includes the treatment of the analytes after their separation through a suitable separation technique, mainly liquid chromatography and capillary electrophoresis. Typically, post separation approaches include either the addition of a reagent/solvent to derivatize the analyte/enhance the sensitivity, pH change, or the conversion of the analyte through a photochemical/electrochemical system (reagent-free systems). This review focuses on the developed methods using post-column manipulation of sample with pharmaceuticals and biomedical applications, covering the period from 2000 to midle-2023. Chemistries combined with fluorescence, UV-vis and mass spectrometric detection are discussed employing both liquid chromatography and electrophoretic techniques for separation. Noteworthy instrumental modifications are also discussed.

On-line wall-free cell for laser-induced fluorescence detection in capillary electrophoresis

A wall-free detection method based on liquid junction in a capillary gap was proposed for laser-induced fluorescence (LIF) of capillary electrophoresis (CE). The capillary gap of the wall-free cell was fabricated by etching a 10-mm x 50-microm I.D. fused-silica capillary to obtain a polyimide coating sleeve, decoating about 6mm at one end of both 50 microm I.D. separation and liquid junction capillary, inserting the treated capillary ends into the coating sleeve oppositely, fixing the capillaries with a gap distance of 140 microm by epoxy glue and removing the coating sleeve by burning. The theoretical model, experimental results and wall-free cell images indicated that the gap distance and applied voltage were main influence factors on the wall-free detection. Since the wall-free cell increased the absorption light path and avoided the stray light from the capillary wall, it improved the ratio of signal to noise and limit of detection (LOD) of CE-LIF. Three flavin compounds of riboflavin (RF), flavin mononucleotide sodium (FMN) and flavin adenine dinucleotide disodium (FAD) were used to evaluate the wall-free detection method. Compared with on-column cell, the LODs of the wall-free cell were improved 15-, 6- and 9-fold for RF, FMN and FAD, respectively. The linear calibration concentrations of the flavins ranged from 0.005 to 5.0 micromol/L. The column efficiency was in the range from 1.0 x 10(5) to 2.5 x 10(5) plates. The wall-free detection of CE-LIF was applied to the analysis of the flavins in spinach and lettuce leaves.