Solid-phase extraction-capillary electrophoresis-mass spectrometry for the determination of tetracyclines residues in surface water by using carbon nanotubes as sorbent material

Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Tandem Förster resonance energy transfer induced visual ratiometric fluorescence sensing of tetracyclines based on zeolitic imidazolate framework-8 incorporated with carbon dots and safranine T

With increasing TC concentration, tandem FRET1 from CDs to TC, then FRET2 from TC to safranine T were occurred. TC could be easily recognized by naked eye. Besides, we could perform on-site detection of TC with the help of a mobile phone.

Determination of Tetracycline Using Ultrasound-Assisted Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Droplet Followed by HPLC-UV System

BACKGROUND

Tetracyclines (TCs) are a group of broad-spectrum antibiotics that may be used to control bacterial diseases in humans or are applied as feed additives to enhance growth in farm animals. TCs are released into the aquatic environment via different pathways. Many analytical methods combined with a preconcentration step have been introduced for the determination of TC in various environmental samples.

OBJECTIVE

The objective this paper is developing reliable analytical methods for determination of TC trace in various environmental samples.

METHOD

In the present work, combined ultrasound-assisted and dispersive liquid-liquid microextraction according to the solidification of floating organic drop as a sample preconcentration procedure for determining TC hydrochloride HPLC in water and serum samples was used.

RESULTS

A series of parameters, including the type and volume of disperser and extraction solvents, salt effect, extraction time, and pH of solution influencing the extraction efficiency of UA-DLLME-SFO was examined. Enrichment factors were in the range of 125-137 for TC hydrochloride under optimum conditions. The linear range was calculated from 0.005 to 3 mg/L and LOD at 0.002 mg/L. RSDs were in the range of 2.7 to 3.2 (n = 5). The UA-DLLME-SFO method used in water and serum samples revealed good extraction recoveries with RSD of 2.7-4.3%.

CONCLUSIONS

This method significantly decreased the organic solvent volume from 3 mL to 90 µL, also LOD and linear ranges were lower than or almost close to levels obtained in other research studies. In this procedure, an ultrasound bath enhanced the mixing and contact between the sample solution and the extraction solvent.

Rational design of built-in stannic oxide-copper manganate microrods p-n heterojunction for photoelectrochemical sensing of tetracycline

Tetracycline (TC), a popularly found drug pollutant, can be contaminated in food and aquatic regions and causes a severe impact on human health. In this research, a visible light active p-stannic oxide/n-copper manganate (p-SnO₂/n-CuMnO₂) heterojunction was synthesized and has been applied for a signal on photoelectrochemical sensing of antibiotic TC. Firstly, the n-SnO₂ microrods were synthesized via a simple and efficient homogeneous precipitation method and the p-CuMnO₂ nanoparticles were synthesized by a facile ultrasound-assisted hydrothermal method. The SnO₂/CuMnO₂ microrods p-n heterojunction was prepared through a simple impregnation method and physicochemical properties of the microrods are characterized by using X-ray diffraction (XRD), Raman, Brunauer-Emmett-Teller (BET), Fourier-transform infrared (FTIR), UV-Vis diffuse reflectance spectroscopy (UVDRS), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Mott-Schottky analyses. The photoelectrochemical sensing performance of SnO₂/CuMnO₂ microrods was 2.7 times higher than that of as-synthesized pure SnO₂ microrods is due to the more visible light absorption ability and p-n heterojunction (synergy). The designed SnO₂/CuMnO₂/ITO sensor gives photocurrent signals for the detection of TC in the range of 0.01-1000 μM with the detection limit (LOD) of 5.6 nM. The practical applicability of the sensor was monitored in cow milk and the Taipei River water sample.

Adsorption characteristics of Pb(II), Cd(II) and Cu(II) on carbon nanotube-hydroxyapatite

Based on batch experiments, we investigate the adsorption characteristics of Pb(II), Cd(II) and Cu(II) on multi-walled carbon nanotube-hydroxyapatite (MWCNT-HAP) composites in detail and explore the effects of the solid-to-liquid ratio, pH, the ionic strength, reaction time and temperature on adsorption. The results show that the adsorption on MWCNT-HAP follows Pb(II)>Cu(II)>Cd(II). With an increasing solid-to-liquid ratio, the adsorption quantity of Pb(II), Cd(II) and Cu(II) on MWCNT-HAP decreases, whereas the removal efficiency increases. The optimal pH for adsorption is 4.0∼6.0. The effect of the ionic strength on the adsorption of Cd(II) is pronounced, whereas that on the adsorption of Pb(II) and Cu(II) is small. In the single-component system and ternary-component system, the adsorption processes for Pb(II), Cd(II) and Cu(II) on MWCNT-HAP have fast kinetics, and the pseudo-second-order kinetics model can well describe the adsorption kinetics of the three heavy metals. The adsorption of Pb(II), Cd(II) and Cu(II) on MWCNT-HAP is spontaneous and endothermic, and the Langmuir model can well simulate the isothermal adsorption of Pb(II) and Cu(II), whereas the Langmuir and Freundlich models can be used to describe the isothermal adsorption of Cd(II).

Trends in sample preparation and separation methods for the analysis of very polar and ionic compounds in environmental water and biota samples

Recent years showed a boost in knowledge about the presence and fate of micropollutants in the environment. Instrumental and methodological developments mainly in liquid chromatography coupled to mass spectrometry hold a large share in this success story. These techniques soon complemented gas chromatography and enabled the analysis of more polar compounds including pesticides but also household chemicals, food additives, and pharmaceuticals often present as traces in surface waters. In parallel, sample preparation techniques evolved to extract and enrich these compounds from biota and water samples. This review article looks at very polar and ionic compounds using the criterion log P ≤ 1. Considering about 240 compounds, we show that (simulated) log D values are often even lower than the corresponding log P values due to ionization of the compounds at our reference pH of 7.4. High polarity and charge are still challenging characteristics in the analysis of micropollutants and these compounds are hardly covered in current monitoring strategies of water samples. The situation is even more challenging in biota analysis given the large number of matrix constituents with similar properties. Currently, a large number of sample preparation and separation approaches are developed to meet the challenges of the analysis of very polar and ionic compounds. In addition to reviewing them, we discuss some trends: for sample preparation, preconcentration and purification efforts by SPE will continue, possibly using upcoming mixed-mode stationary phases and mixed beds in order to increase comprehensiveness in monitoring applications. For biota analysis, miniaturization and parallelization are aspects of future research. For ionic or ionizable compounds, we see electromembrane extraction as a method of choice with a high potential to increase throughput by automation. For separation, predominantly coupled to mass spectrometry, hydrophilic interaction liquid chromatography applications will increase as the polarity range ideally complements reversed phase liquid chromatography, and instrumentation and expertise are available in most laboratories. Two-dimensional applications have not yet reached maturity in liquid-phase separations to be applied in higher throughput. Possibly, the development and commercial availability of mixed-mode stationary phases make 2D applications obsolete in semi-targeted applications. An interesting alternative will enter routine analysis soon: supercritical fluid chromatography demonstrated an impressive analyte coverage but also the possibility to tailor selectivity for targeted approaches. For ionic and ionizable micropollutants, ion chromatography and capillary electrophoresis are amenable but may be used only for specialized applications such as the analysis of halogenated acids when aspects like desalting and preconcentration are solved and the key advantages are fully elaborated by further research. Graphical abstract.

Ternary Z-scheme heterojunction of Bi SPR-promoted BiVO4/g-C3N4 with effectively boosted photoelectrochemical activity for constructing oxytetracycline aptasensor

Developing photoactive materials with wide spectral response is critical to improve the sensitivity of PEC biosensors. Herein, a sensitive photoelectrochemical (PEC) aptasensor was fabricated based on Bi surface plasmon resonance (SPR)-promoted BiVO₄/g-C₃N₄ (Bi/BiVO₄/g-C₃N₄) as photoactive material for the detection of oxytetracycline (OTC). Ternary Z-scheme Bi/BiVO₄/g-C₃N₄ heterojunction exhibited widest spectral response and best PEC activity compared to g-C₃N₄, BiVO₄, Bi/BiVO₄, and BiVO₄/g-C₃N₄. The wide spectral response and high PEC activity could be attributed to three reasons: Firstly, the SPR effect of Bi could greatly increase light harvesting; Secondly, Bi served as an electron conduction bridge between BiVO₄ and g-C₃N₄ to form Z-scheme structure, significantly accelerating the separation of photogenerated carriers; Thirdly, the synergism of Z-scheme heterojunction and the SPR effect of Bi efficiently boosted the photoelectric response. Based on the above sensitization strategies, the proposed PEC aptasensor for OTC determination showed a wide linear range of 0.01-1000 nM and a low detection limit (S/N = 3) of 3.3 × 10^-3 nM. Moreover, the high stability, satisfactory repeatability and favorable practicability of the fabricated PEC aptasensor revealed the potential applications for accurate monitoring of antibiotics in environmental media.

Helical Multi-walled Carbon Nanotubes as an Efficient Material for the Dispersive Solid-Phase Extraction of Low and High Molecular Weight Polycyclic Aromatic Hydrocarbons from Water Samples: Theoretical Study

The differences in effectiveness of multi-walled carbon nanotubes (MWCNTs) as the dispersive solid-phase extraction (dSPE) sorbent for the selective extraction of polycyclic aromatic hydrocarbons (PAHs) were explained on the basis of theoretical study. It was observed that for low molecular weight PAHs, the recoveries using non-helical and helical MWCNTs were similar. In contrary, for PAHs containing five or more aromatic rings, the extraction efficiency was higher using HMWCNTs than for non-helical ones. Principle component analysis (PCA) as well as providing structural parameters and interaction energies for adsorption processes (PAH + CNT → PAH-CNT) have been used for this purpose. All the PAH + CNT → PAH-CNT adsorption processes considered were found to be thermodynamically favorable. However, the adsorption energies (E_ads) for PAHs and the helical carbon nanotube surface estimated for the B(a)P-HCNT and I(1,2,3-cd)P-HCNT are substantially less negative than those observed for PAH molecules interacting with the non-helical CNT. Namely, the E_ads calculated in simulated aqueous environment for the B(a)P-MWCNT(6,2) and I(1,2,3-cd)P-MWCNT(6,2) were respectively - 43.32 and - 59.98 kcal/mol, while values of only - 7.75 kcal/mol (B(a)P-HCNT) and - 9.13 kcal/mol (I(1,2,3-cd)P-HCNT) were found for the corresponding PAH-HCNT systems. Therefore, we conclude that the replacement of MWCNTs with HCNTs leads to PAH-HCNT systems in which the interaction energies are much smaller than those estimated for the corresponding PAH-MWCNT systems. HMWCNTs are therefore recommended as the dSPE sorbent phase for the extraction of both low and high molecular weight PAHs from water samples.

Dispersive Solid Phase Extraction for the Analysis of Veterinary Drugs Applied to Food Samples: A Review

To achieve analytical success, it is necessary to develop thorough clean-up procedures to extract analytes from the matrix. Dispersive solid phase extraction (DSPE) has been used as a pretreatment technique for the analysis of several compounds. This technique is based on the dispersion of a solid sorbent in liquid samples in the extraction isolation and clean-up of different analytes from complex matrices. DSPE has found a wide range of applications in several fields, and it is considered to be a selective, robust, and versatile technique. The applications of dispersive techniques in the analysis of veterinary drugs in different matrices involve magnetic sorbents, molecularly imprinted polymers, carbon-based nanomaterials, and the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method. Techniques based on DSPE permit minimization of additional steps such as precipitation, centrifugation, and filtration, which decreases the manipulation of the sample. In this review, we describe the main procedures used for synthesis, characterization, and application of this pretreatment technique and how it has been applied to food analysis.

Nanomaterials for sample pretreatment prior to capillary electrophoretic analysis

Nanomaterials are, in analytical science, used for a broad range of purposes, covering the area of sample pretreatment as well as separation, detection and identification of target molecules.

Determination of Tetracycline Antibiotic Residues in Honey and Milk by Miniaturized Solid Phase Extraction Using Chitosan-Modified Graphitized Multiwalled Carbon Nanotubes

A rapid, simple, and strongly selective miniaturized solid phase extraction (SPE) technique, requiring only small amounts of sorbent (24 mg) and elution solvent (600 μL), coupled with ultrahigh-performance liquid chromatography and quadrupole time-of-flight mass spectrometry was developed for detecting tetracycline antibiotics. These analytes were extracted from honey and milk using chitosan-modified graphitized multiwalled carbon nanotubes (G-MWNTs) as the solid sorbent and acetonitrile/acetic acid (8:2, v/v) as the eluent in miniaturized SPE. Under the optimum experimental conditions, a satisfactory linearity (r(2) > 0.992) was obtained, and the limits of detection were in the range of 0.61-10.34 μg/kg for the analytes. The mean recoveries of the five tetracycline antibiotic residues in the real samples were between 81.5 and 101.4%. The results demonstrated that chitosan-modified G-MWNTs comprise a promising material for the enrichment of tetracycline antibiotics from complex food matrices.

Hydrophilic-Hydrophobic Patterned Molecularly Imprinted Photonic Crystal Sensors for High-Sensitive Colorimetric Detection of Tetracycline

A hydrophilic-hydrophobic patterned molecularly imprinted (MIP) photonic crystal (PC) sensor is fabricated for highly sensitive tetracycline detection. The relationship between the tetracycline concentration, its corresponding color of the sensor, and the diameter of MIP-PC dot is found using a fan-shaped color card. This work provides a new strategy to design the sensors with tunable detection ranges for practical applications.

Effects of the interaction of single-walled carbon nanotubes with 4-nonylphenol on their in vitro toxicity

The aim of this study was to assess the toxicological risks arising from the coexistence of polyethylene glycol coated single-walled carbon nanotubes (SWCNTs-PEG) and a known environmental contaminant: 4-nonylphenol (NP). To this end, in vitro toxicity assays involving the exposure of 3T3-L1 cells (mouse embryonic fibroblasts) to SWCNTs-PEG alone or in combination with NP for 24 or 48 h were performed. Experimental treatments were conducted in both presence (10%) and absence of serum in order to evaluate its influence on the toxicity of SWCNTs-PEG. Although the results provided no unambiguous evidences of synergistic toxicity between SWCNTs-PEG and NP, some specific treatments with mixtures (SWCNTs-PEG+NP) resulted in an unexpected combined toxicity in relation to the individual treatments. Only in those cases the interaction between SWCNTs-PEG and NP could have a synergistic effect on the resulting toxicity. The addition of 10% serum increased the stability of SWCNTs-PEG in the culture medium-possibly by steric repulsions-and reduced the toxicity of nanoparticles as a result. Overall, the serum had a "protective effect" on cells against all treatments: SWCNTs-PEG, NP or their mixtures (SWCNTs-PEG+NP). Raman spectroscopy allowed the intracellular distribution of SWCNTs-PEG to be elucidated.