Qualitative mass spectrometric analysis of the volatile fraction of creosote-treated railway wood sleepers by using comprehensive two-dimensional gas chromatography

Experimentally and spectroscopically evidenced mechanistic study of butyl peroxyacid oxidative degradation of benzo[a]pyrene in soil

Benzo[a]pyrene (BaP) is a major indicator of soil contamination and categorized as a highly persistent, carcinogenic, and mutagenic polycyclic aromatic hydrocarbon. An advanced peroxyacid oxidation process was developed to reduce soil pollution caused by BaP originating from creosote spills from railroad sleepers. The pH, organic matter, particle size distribution of soil, and concentrations of BaP and heavy metals (Cd, Cu, Zn, Pb, and As) in the BaP-contaminated soils were estimated. A batch experiment was conducted to determine the effects of organic acid type, soil particle size, stirring speed, and reaction time on the peroxyacid oxidation of BaP in the soil samples. Additionally, the effect of the organic acid concentration on the peroxyacid degradation of BaP was investigated using an oxidizing agent in spiked soil with and without hydrogen peroxide. The results of the oxidation process indicated that BaP and heavy metal residuals were below acceptable Korean standards. A significant difference in the oxidative degradation of BaP was observed between the spiked and natural soil samples. The formation of a peroxyacid intermediate was primarily responsible for the enhanced BaP oxidation. Further, butyric acid could be reused thrice without losing the efficacy (<90%). The systematic peroxyacid oxidative degradation mechanism of BaP was also discussed. A qualitative analysis of the by-products of the BaP reaction was conducted, and their corresponding toxicities were determined for possible field applications. The findings conclude that the developed peroxyacid oxidation method has potential applications in the treatment of BaP-contaminated soils.

Metataxonomic analyses reveal differences in aquifer bacterial community as a function of creosote contamination and its potential for contaminant remediation

Metataxonomic approach was used to describe the bacterial community from a creosote-contaminated aquifer and to access the potential for in situ bioremediation of the polycyclic aromatic hydrocarbons (PAHs) by biostimulation. In general, the wells with higher PAH contamination had lower richness and diversity than others, using the Shannon and Simpson indices. By the principal coordinate analysis (PCoA) it was possible to observe the clustering of the bacterial community of most wells in response of the presence of PAH contamination. The significance analysis using edgeR package of the R program showed variation in the abundance of some Operational Taxonomic Units (OTUs) of contaminated wells compared to uncontaminated ones. Taxons enriched in the contaminated wells were correlated positively (p < 0.05) with the hydrocarbons, according to redundancy analysis (RDA). All these enriched taxa have been characterized as PAH degrading agents, such as the genus Comamonas, Geobacter, Hydrocarboniphaga, Anaerolinea and Desulfomonile. Additionally, it was possible to predict, with the PICRUSt program, a greater proportion of pathways and genes related to the degradation of PAHs in the wells with higher contamination levels. We conclude that the contaminants promoted the enrichment of several groups of degrading bacteria in the area, which strengthens the feasibility of applying biostimulation as an aquifer remediation strategy.

Comprehensive composition of Creosote using comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GCxGC-TOFMS)

Creosote is a distillation product of coal tar and is widely used as wood preservative for railway sleepers, utility poles and for other applications. Creosote can have potentially negative effects on the environment and many of the components are toxic. This study presents the analysis of a Creosote sample from a former wood impregnation plant located in the UK. The sample was analysed using two dimensional gas chromatography time-of-flight mass spectrometry (GCxGC-TOFMS) and a database of compounds that could be detected was produced. The GCxGG-TOFMS was capable of detecting 1505 individual compounds, which is far more than previous estimates for the number of compounds present within Creosote. Post extraction derivatization using BTSFA with 1% TMCS was employed to increase the potential number of compounds detected with 255 derivatized compounds detected, 231 of which would not have been detected without prior derivatization. Selected derivatized compounds were quantified with limits of detection ranging from 0.6 mg/kg to 1.6 mg/kg from a concentrated dense non-aqueous phase liquid (DNAPL). This work presents the first published full analysis of a Creosote using GCxGC-TOFMS combined with derivatization.

A new way to discriminate polluted wood by vibrational spectroscopies

In this work, two sets of samples were considered: field samples collected from local waste wood and synthetic samples made by mixing clean wood (including oak, beech, poplar) with typical organic pollutants: creosote, polychlorinated byphenils (PCBs), pentachlorophenol (PCP), cypermethrin, dodecyl dimethyl ammonium chloride (DDAC). Vibrational spectroscopy techniques were tested to detect organic pollutants in wood items. Raman and infrared spectroscopies were showed as fast, non-destructive and non-invasive fingerprint techniques for detection of organic molecules. Associated with principal component analysis, we have shown the evidence of quick detection of and discrimination of polluted wood items by kinds and versus concentration.

Impact resistance of oil-immersed lignum vitae

Biological materials immersed in vegetable and mineral oil, such as rattan armor and wooden sleepers, have been extensively used since ancient times because of their excellent mechanical properties. This study quantitatively investigated the viscoelasticity and tribological performance of lignum vitae immersed in poly-alpha-olefin (PAO) and tung oils (Aleuritesfordii Hemsl.) to reveal the mechanism of impact resistance. The acceleration of samples immersed in tung oil was higher than that of dry and PAO-immersed samples in the first impact. The elastic modulus of the samples immersed in tung oil increased slightly. The impact damage on the samples immersed in tung oil was reduced because of the low friction coefficient (0.07) resulted in a low wear rate. The extent of impact damage on the samples immersed in tung oil was approximately 34% and 58% lower than that on the dry and PAO oil-immersed samples, respectively, under an angle of 20° and a height of 10 cm. The impact damage on the PAO-immersed samples was reduced because of low friction coefficient. However, impact damage increased because of large elastic modulus. The findings of this study can serve as a reference for the application of modified biological materials with high strength and wear resistance.

Synergistic effects of melphalan and Pinus kesiya Royle ex Gordon (Simaosong) extracts on apoptosis induction in human cancer cells

Background

This study aims to determine the synergistic effects of the chemotherapeutic drug melphalan and the phytoconstituents extracted from Pinus kesiya Royle ex Gordon (Simaosong) in human cancer cells.

Methods

P. kesiya twigs extracted from 50 % ethanol–water were evaluated alone (6–500 µg/mL) and in combination with melphalan (0.75–15 µg/mL). The cytotoxic effects of single extract or extract and melphalan combination were examined by a neutral red assay to investigate their antiproliferative and apoptosis induction effects in the U937 and HepG2 cell lines. Nuclei morphological change and DNA fragmentation were examined by DNA nuclei staining with 4´6-diamidino-2-phenylindole (DAPI) and agarose gel electrophoresis, respectively. The chemical constituents of the P. kesiya extract were assessed using gas chromatography–mass spectrometry (GC–MS) analysis. The synergistic effects of different IC₅₀ ratios of the P. kesiya extract and melphalan combination were analyzed in each cancer cell line. The dose reduction index (DRI) was calculated to determine the extent of concentration reduction in the combination treatment compared with the concentration of each single treatment.

Results

The IC₅₀ ratios for melphalan to P. kesiya extract that caused 75 % antiproliferation could be reduced after combination. This response was greater in the U937 cells than in the HepG2 cells (all P < 0.001). Melphalan and P. kesiya extract had a similar effect on apoptosis induction both singly and in combination. P. kesiya extract synergized the antiproliferation and apoptosis induction effects of melphalan.

Conclusions

Combining the P. kesiya extract with melphalan reduced toxicity while retaining the therapeutic efficacy of melphalan.

Evaluation of the PAH and water-extractable phenols content in used cross ties from the French rail network

Recycling used railway sleepers is a major economic and environmental issue since nearly 50000 tons of those are incinerated every year in France. Therefore, it appeared essential to determine the real toxicity of sleepers and particularly for very old one. They are treated with creosote, which contains toxic and carcinogen compounds such as polycyclic aromatic hydrocarbons (PAHs). This study aims at measuring the amount of 16 priority PAHs and water extractable phenols in 12 sleepers implemented between 1936 and 1978. Results showed that the creosote content was systematically far above 1000mgkg(-1), even after 76years ageing. Crossties should then be considered as a hazardous waste according to European regulations. Less creosote and PAHs were detected in the sleepers centers. Moreover, the fraction of volatile PAHs was lower in the surface part, due to their evaporation. It appeared that a long ageing process was not sufficient to remove the major part of volatile PAHs and that they could be yet released in the atmospheric environment. Moreover, most of the treated crossties contained huge amount of the highly toxic benzo[a]pyrene, between 179mgkg(-1) and up to 853mgkg(-1) in wood. In contrast, the study revealed that concentrations of water extractable phenols were well below European regulations (3% by mass of creosote).