Polyethylene glycol diacrylate-based supermacroporous monolithic cryogel as high-performance liquid chromatography stationary phase for protein and polymeric nanoparticle separation

Lectin Purification through Affinity Chromatography Exploiting Macroporous Monolithic Adsorbents

Growing medical, engineering, biochemical, and biological interest has led to a steady pace of research and development into polymeric monolithic structures with densely interconnected pores for purifying bio compounds. Cryogels, which are generated by freezing a reactive polymerization mixture, are highlighted due to their versatility and low relative cost as macroporous, polymeric, monolithic adsorbents. The conversion of cryogels into affinity adsorbents is one possible alternative to their optimal application. Some of the most often utilized supports for immobilizing particular ligands are monolithic columns manufactured with epoxy radicals on their surfaces. The purification of biomolecules with a high degree of specificity, such as lectins and glycoproteins with an affinity for glycosylated groups, has garnered interest in the use of fixed non-traditional beds functionalized with ligands of particular interest. The interaction is both robust enough to permit the adsorption of glycoproteins and reversible enough to permit the dissociation of molecules in response to changes in the solution’s pH. When compared to other protein A-based approaches, this one has been shown to be more advantageous than its counterparts in terms of specificity, ease of use, and cost-effectiveness. Information on polymeric, macroporous, monolithic adsorbents used in the affinity chromatographic purification of lectins has been published and explored.

Redefining the chemistry of super-macroporous materials: when dendritic molecules meet polymer cryogels

Dendritic cryogels modify the functionality and properties against conventional cryogels and improve the Immunoglobulin G (IgG) adsorption.

Microwave-assisted grafting polymerization modification of nylon 6 capillary-channeled polymer fibers for enhanced weak cation exchange protein separations

A weak cation exchange liquid chromatography stationary phase (nylon-COOH) was prepared by grafting polyacrylic acid on to native nylon 6 capillary-channeled polymer (C-CP) fibers via a microwave-assisted radical polymerization. To the best of our knowledge, this is the first study of applying microwave-assisted grafting polymerization to affect nylon material for protein separation. The C-CP fiber surfaces were characterized by attenuated total reflection (ATR) infrared spectroscopy and scanning electron microscope (SEM). The anticipated carbonyl peak at 1722.9 cm^-1 was found on the nylon-COOH fibers, but was not found on the native fiber, indicating the presence of the polyacrylic acid on nylon fibers after grafting. The nylon-COOH phase showed a ∼12× increase in lysozyme dynamic binding capacity (∼12 mg mL^-1) when compared to the native fiber phase (∼1 mg mL^-1). The loading capacity of the nylon-COOH phase is nearly independent of the lysozyme loading concentration (0.05-1 mg mL^-1) and the mobile phase linear velocity (7.3-73 mm s^-1). The reproducibility of the lysozyme recovery from the nylon-COOH (RSD = 0.3%, n = 10) and the batch-to-batch variability in the functionalization (RSD = 3%, n = 5) were also investigated, revealing very high levels of consistency. Fast baseline separations of myoglobin, α-chymotrypsinogen A, cytochrome c and lysozyme were achieved using the nylon-COOH column. It was found that a 5× increase in the mobile phase linear velocity (7.3-to-36.5 mm s^-1) had little effect on the separation resolution. The microwave-assisted grafting polymerization has great potential as a generalized surface modification methodology across the applications of C-CP fibers.

Monolithic precolumns as efficient tools for guiding the design of nanoparticulate drug-delivery formulations

The development of nanomedicines for improved diagnosis and treatment of diseases is pushing current analytical methods to their limits. More efficient, quantitative high-throughput screening methods are needed to guide the optimization of promising nanoparticulate drug delivery formulations. In response to this need, we present herein a novel approach using monolithic separation media. The unique porosity of our capillary monolithic precolumns allows the direct injection and online removal of protamine-oligonucleotide nanoparticles ("proticles") without column clogging, thus avoiding the need for time-consuming off-line sample workup. Furthermore, ring-opening metathesis polymerization (ROMP)-derived monoliths show equivalent preconcentration efficiency for the target drug vasoactive intestinal peptide (VIP) as conventional particle-packed precolumns. The performance of the ROMP-derived monolithic precolumns was constant over at least 100 injections of crude proticle-containing and 300 injections of highly acidic samples. Applying a validated LC-MS/MS capillary monolithic column switching method, we demonstrate the rapid determination of both drug load and in vitro drug release kinetics of proticles within the critical first 2 h and investigate the stability of VIP-loaded proticles in aqueous storage medium intended for inhalation therapy.

Recent applications of carbon-based nanomaterials in analytical chemistry: critical review

The objective of this review is to provide a broad overview of the advantages and limitations of carbon-based nanomaterials with respect to analytical chemistry. Aiming to illustrate the impact of nanomaterials on the development of novel analytical applications, developments reported in the 2005-2010 period have been included and divided into sample preparation, separation, and detection. Within each section, fullerenes, carbon nanotubes, graphene, and composite materials will be addressed specifically. Although only briefly discussed, included is a section highlighting nanomaterials with interesting catalytic properties that can be used in the design of future devices for analytical chemistry.

Porous polymer monoliths: amazingly wide variety of techniques enabling their preparation

The porous polymer monoliths went a long way since their invention two decades ago. While the first studies applied the traditional polymerization processes at that time well established for the preparation of polymer particles, creativity of scientists interested in the monolithic structures has later led to the use of numerous less common techniques. This review article presents vast variety of methods that have meanwhile emerged. The text first briefly describes the early approaches used for the preparation of monoliths comprising standard free radical polymerizations and includes their development up to present days. Specific attention is paid to the effects of process variables on the formation of both porous structure and pore surface chemistry. Specific attention is also devoted to the use of photopolymerization. Then, several less common free radical polymerization techniques are presented in more detail such as those initiated by gamma-rays and electron beam, the preparation of monoliths from high internal phase emulsions, and cryogels. Living processes including stable free radicals, atom transfer radical polymerization, and ring-opening metathesis polymerization are also discussed. The review ends with description of preparation methods based on polycondensation and polyaddition reactions as well as on precipitation of preformed polymers affording the monolithic materials.