Determination of ethyl sulfate in human serum and urine by capillary zone electrophoresis

Determination of Ethyl Glucuronide and Ethyl Sulfate in Human Whole Blood and Vitreous Humor by LC-MS-MS and Applications to the Interpretation of Postmortem Ethanol Findings

Identifying the source of ethanol in a decedent remained a complicated problem for forensic toxicologists because of postmortem ethanol formation. As ethanol's non-oxidative metabolites, ethyl glucuronide (EtG) and ethyl sulfate (EtS) have the potential to distinguish between antemortem ethanol consumption and postmortem ethanol formation, due to their high sensitivity and selectivity. In the current study, a simple and quick liquid chromatography tandem mass spectrometry (LC-MS/MS) method was developed for the determination of EtG and EtS in human whole blood and vitreous humor (VH). A total of 20 μL of the sample was precipitated by methanol, and the analytes were detected by LC-MS/MS in a run of 6 min. This method achieved high sensitivity (limits of detection: 2 ng/mL for both EtG and EtS), with linearity in the range of 5-10,000 ng/mL in both whole blood and VH. Deviations in accuracy, inter- and intra-day precision were all lower than 15% at three quality control levels. Subsequently, this method was applied to 62 real forensic cases. Only blood samples were available in 52 cases. Paired blood and VH samples were present in 10 cases. The concentrations of EtG and EtS in blood were in the range of 0-22,264.8 ng/mL and 0-2,126.0 ng/mL, respectively. In one case with both blood and VH, the blood ethanol concentration was 1.22 mg/mL, with EtG and EtS both below limits of quantification (5 ng/mL) in VH, and no EtG and EtS found in whole blood. The results suggested that EtG and EtS were useful markers for the interpretation of ethanol resource in postmortem blood and VH.

Biomarkers of Alcohol Consumption in Body Fluids - Possibilities and Limitations of Application in Toxicological Analysis

BACKGROUND

Ethyl alcohol is the most popular legal drug, but its excessive consumption causes social problems. Despite many public campaigns against alcohol use, car accidents, instances of aggressive behaviour, sexual assaults and deterioration in labor productivity caused by inebriated people is still commonplace. Fast and easy diagnosis of alcohol consumption is required in order to introduce proper and effective therapy, and is crucial in forensic toxicology analysis. The easiest method to prove alcohol intake is determination of ethanol in body fluids or in breath. However, since ethanol is rapidly metabolized in the human organism, only recent consumption can be detected using this method. Because of that, the determination of alcohol biomarkers was introduced for monitoring alcohol consumption over a wider range of time.

OBJECTIVE

The objective of this study was to review published studies focusing on the sample preparation methods and chromatographic or biochemical techniques for the determination of alcohol biomarkers in whole blood, plasma, serum and urine.

METHODS

An electronic literature search was performed to discuss possibilities and limitations of application of alcohol biomarkers in toxicological analysis.

RESULTS

Authors described the markers of alcohol consumption such as: ethanol, its nonoxidative metabolites (ethyl glucuronide, ethyl sulfate, phosphatidylethanol, ethyl phosphate, fatty acid ethyl esters) and oxidative metabolites (acetaldehyde and acetaldehyde adducts). We also discussed issues concerning the detection window of these biomarkers, and possibilities and limitations of their use in routine analytical toxicology for monitoring alcohol consumption or sobriety during alcohol therapy.

Alternative sampling strategies for the assessment of alcohol intake of living persons

Monitoring of alcohol consumption by living persons takes place in various contexts, amongst which workplace drug testing, driving under the influence of alcohol, driving licence regranting programs, alcohol withdrawal treatment, diagnosis of acute intoxication or fetal alcohol ingestion. The matrices that are mostly used today include blood, breath and urine. The aim of this review is to present alternative sampling strategies that allow monitoring of the alcohol consumption in living subjects. Ethanol itself, indirect (carbohydrate deficient transferrin, CDT%) as well as direct biomarkers (ethyl glucuronide, EtG; ethyl sulphate, EtS; fatty acid ethyl esters, FAEEs and phosphatidylethanol species, PEths) of ethanol consumption will be considered. This review covers dried blood spots (CDT%, EtG/EtS, PEths), dried urine spots (EtG/EtS), sweat and skin surface lipids (ethanol, EtG, FAEEs), oral fluid (ethanol, EtG), exhaled breath (PEths), hair (EtG, FAEEs), nail (EtG), meconium (EtG/EtS, FAEEs), umbilical cord and placenta (EtG/EtS and PEth 16:0/18:1). Main results, issues and considerations specific to each matrix are reported. Details about sample preparation and analytical methods are not within the scope of this review.

Bioanalytical procedures and developments in the determination of alcohol biomarkers in biological specimens

Excessive alcohol consumption is a global problem, and consequently its evaluation is of great clinical and forensic interest. Alcohol biomarkers have been the focus of several research works in the past decades, with new compounds being studied in more recent years. The main objective of this review is to discuss topics for an analyst to consider when evaluating alcohol consumption through the analysis of alcohol biomarkers in biological specimens. For this, existing alcohol biomarkers will be reviewed, including carbohydrate-deficient transferrin, 5-hydroxytryptophol, ethanol, hemoglobin-associated acetaldehyde, fatty acid ethyl esters, ethyl glucuronide, ethyl sulfate and phosphatidylethanol. Additionally, their potential will be discussed, as well as analytical considerations, main challenges, limitations, data interpretation and existing methodologies for their determination in biological specimens.

Electromigrative separation techniques in forensic science: combining selectivity, sensitivity, and robustness

In this review we introduce the advantages and limitations of electromigrative separation techniques in forensic toxicology. We thus present a summary of illustrative studies and our own experience in the field together with established methods from the German Federal Criminal Police Office rather than a complete survey. We focus on the analytical aspects of analytes' physicochemical characteristics (e.g. polarity, stereoisomers) and analytical challenges including matrix tolerance, separation from compounds present in large excess, sample volumes, and orthogonality. For these aspects we want to reveal the specific advantages over more traditional methods. Both detailed studies and profiling and screening studies are taken into account. Care was taken to nearly exclusively document well-validated methods outstanding for the analytical challenge discussed. Special attention was paid to aspects exclusive to electromigrative separation techniques, including the use of the mobility axis, the potential for on-site instrumentation, and the capillary format for immunoassays. The review concludes with an introductory guide to method development for different separation modes, presenting typical buffer systems as starting points for different analyte classes. The objective of this review is to provide an orientation for users in separation science considering using capillary electrophoresis in their laboratory in the future.

Strong anion determination in biological fluids by capillary electrophoresis for clinical diagnostics

New methods for quantitative analysis of strong anions are required for diagnostic testing of human diseases. Current techniques suffer from poor selectivity and/or long analysis times that are not amenable for labile anions in high-saline or volume-restricted samples. We introduce a rapid assay (<5 min) based on capillary electrophoresis (CE) with indirect UV detection for simultaneous analysis of sulfate, sulfite, and chloride in human urine, plasma, and sweat specimens. Remarkable selectivity for strong anions is achieved by using an acidic background electrolyte under reversed polarity that results in electrokinetic rejection of matrix interferences at the capillary inlet. A dual co-ion probe system consisting of 5 mM naphthalene disulfonate (NDS) and 5 mM naphthalene trisulfonate (NTS) in 0.4 M formic acid, pH 2.0 is developed for detection of UV transparent anions (S/N ≈ 3, 60 μM with a 25 μm inner diameter fused-silica capillary) with good peak symmetry and baseline stability. Due to the chemical reactivity of sulfite, dilute formaldehyde is used as a reagent to form an acid-stable hydroxymethylsulfonate adduct. Method validation confirmed excellent linearity (R(2) > 0.999), good accuracy (mean bias ≈7%), and acceptable long-term reproducibility (CV < 10%) over 20 days. The assay allows for artifact-free determination of sulfate and sulfite with consistent results for chloride when compared to standard electrochemical methods (R(2) > 0.975). Preliminary data suggest that kidney-stone formers have lower urinary sulfate excretion relative to non-kidney-stone patient controls (p = 0.0261). CE offers a selective yet robust platform for routine analysis of strong anions that is needed for confirmatory testing of cystic fibrosis, sulfite oxidase deficiency, urolithiasis, and other disorders of sulfur metabolism and/or anion transport.

A fully validated method for the quantification of ethyl glucuronide and ethyl sulphate in urine by UPLC-ESI-MS/MS applied in a prospective alcohol self-monitoring study

A method for the quantification of ethyl glucuronide (EtG) and ethyl sulphate (EtS) in human urine is developed and fully validated according to international guidelines. Protein precipitation is used as sample preparation. During the development of the method on an UPLC-ESI-MS/MS system using a CSH C18 column, special attention was paid to reduce matrix effects to improve assay sensitivity and to improve detection of the second transition for EtS for specificity purposes. The method was linear from 0.1 to 10μg/mL for both analytes. Ion suppression less than 24% (RSD<15%) was observed for EtG and no significant matrix effect was measured for EtS. The recovery was around 80% (RSD<14%) for both compounds. This method provides good precision (RSDr and RSDt<10%) and bias (<15%) for internal and external quality control samples. The reproducibility of the method was demonstrated by the successful participation to proficiency tests (z-score<0.86). This method was finally used to analyze urine samples obtained from twenty-seven volunteers whose alcohol consumption during the 5 days before sampling was monitored. Concentrations between 0.5 and 101.9μg/mL (mean 10.9, median 1.4) for EtG and between 0.1 and 37.9μg/mL (mean 3.6, median 0.3) for EtS were detected in urine samples of volunteers who declared having consumed alcohol the day before the sampling. EtG and EtS concentrations in urine were highly correlated (r=0.996, p<0.001). A moderate correlation between the number of drinks the day before sampling and the concentration of EtG (r=0.448, p<0.02) or EtS (r=0.406, p<0.04) was observed. Using a cut-off value at 0.1μg/mL for EtG and EtS, this method is able to detect social alcohol consumption approximately 24h after the intake, without showing any false positive result.

The selective determination of sulfates, sulfonates, and phosphates in urine by capillary electrophoresis/mass spectrometry

Metabolite identification and metabolite profiling are of major importance in the pharmaceutical and clinical context. However, anions of biological relevance such as sulfates, sulfonates, and phosphates are rarely included in common techniques for metabolite studies. In this protocol, we demonstrate a unique method to selectively determine these anions. The method comprises a capillary electrophoresis separation using an acidic background electrolyte (pH ≤ 2) and anodic detection by mass spectrometry via negative electrospray ionization. In this way, only anions of strong acids like sulfates are determined. The selectivity for sulfur-containing species is proved based on the specific isotopic ratios. In conjunction with the accurate mass from the time-of-flight mass spectrometer, the presented method is well suited for clinical and pharmaceutical applications to identify possible metabolites and to quantify known metabolites.

Non-oxidative ethanol metabolites as a measure of alcohol intake

Recent alcohol intake can be monitored by the measurement of indirect biomarkers. Elevated levels of liver enzymes (i.e. gamma-glutamyl transferase (GGT), alanine amino transferase (ALT) and aspartate amino transferase (AST)) in blood are commonly used in clinical practice as an indicator of alcohol-induced liver damage. With the exception of carbohydrate-deficient transferrin (CDT), the specificity of indirect markers is only moderate because many cases of elevated levels are unrelated to alcohol consumption. Because of their intermediate half-life and tendency to accumulate in hair, non-oxidative ethanol metabolites can be used as markers with an intermediate timeframe between ethanol measurements and GGT and CDT with regard to recent alcohol consumption occurring between hours to 1 week. Additionally, these biomarkers offer a high ethanol-specificity in combination with approximately a two-fold higher sensitivity in comparison with indirect alcohol markers. In case of forensic use of direct ethanol metabolites, caution has to be taken in interpretation and pre-analytical pitfalls should be considered.

A high-performance liquid chromatographic-tandem mass spectrometric method for the determination of ethyl glucuronide and ethyl sulfate in urine validated according to forensic guidelines

Ethyl glucuronide (EtG) and ethyl sulfate (EtS) are powerful markers for alcohol intake and abuse. Several analytical procedures for the quantification of EtG and EtG in serum and urine have been developed so far. Many of the published methods show limits of detections (LODs) or limits of quantifications (LOQs) for EtG in urine within the range of 0.1 mg/L or higher. Since this is the actual cutoff value for proving abstinence in Germany, problems may occur if urine samples are highly diluted. In this paper, the validation of a highly sensitive, fast and simple LC-MS-MS for the determination of EtG and EtS in urine is described. The calibration curves for EtG and EtS is linear over the whole range (0.025-2.0 mg/L). Very low detection limits can be achieved (LOD: EtG 0.005 mg/L, EtS 0.005 mg/L; and LOQ: EtG 0.019 mg/L, EtS 0.015 mg/L). All data for selectivity, precision and accuracy, recovery, as well as for the processed sample and the freeze/thaw stability, comply with the guidelines of the German Society of Toxicological and Forensic Chemistry. Strong matrix-related effects can be compensated for by using an internal standard. Finally, the applicability of the procedure is proven by analysis of 87 human urine samples and by successful participation in interlaboratory comparison tests.