An ultrasensitive and highly selective determination method for quinones by high-performance liquid chromatography with photochemically initiated luminol chemiluminescence

Determination of Anthraquinone-Tagged Amines Using High-Performance Liquid Chromatography with Online UV Irradiation and Luminol Chemiluminescence Detection

Quinones are frequently used as derivatization reagents in HPLC analysis to improve detection sensitivity. In the present study, a simple, sensitive, and selective chemiluminescence (CL) derivatization strategy for biogenic amines, prior to their HPLC-CL analysis, was developed. The novel CL derivatization strategy was established based on using anthraquinone-2-carbonyl chloride as derivatizing agent for amines and then using the unique property of the quinones' moiety to generate reactive oxygen species (ROS) in response to UV irradiation. Typical amines such as tryptamine and phenethylamine were derivatized with anthraquinone-2-carbonyl chloride and then injected into an HPLC system equipped with an online photoreactor. The anthraquinone-tagged amines are separated and then UV-irradiated when they pass through a photoreactor to generate ROS from the quinone moiety of the derivative. Tryptamine and phenethylamine can be determined by measuring the chemiluminescence intensity produced by the reaction of the generated ROS with luminol. The chemiluminescence disappears when the photoreactor is turned off, suggesting that ROS are no longer generated from the quinone moiety in the absence of UV irradiation. This result indicates that the generation of ROS could be controlled by turning the photoreactor on and off. Under the optimized conditions, the limits of detection for tryptamine and phenethylamine were 124 and 84 nM, respectively. The developed method is successfully applied to determine the concentrations of tryptamine and phenethylamine in wine samples.

Development of a Selective Assay of Tyrosine and Its Producing and Metabolizing Enzymes Utilizing Pulse-UV Irradiation-Induced Chemiluminescence

A new pulse UV irradiation-induced chemiluminescence (CL) determination method was developed for l-tyrosine using the luminol derivative L-012. The proposed method depends on the formation of reactive oxygen species (ROS) upon pulse UV irradiation of l-tyrosine; then, these ROS react with L-012 producing strong CL. The proposed method showed excellent sensitivity and ultraselectivity toward l-tyrosine. The mechanism of the developed CL method was studied using ROS scavengers, HPLC, and mass spectrometry. The method was linear for l-tyrosine in the range of 0.03-50 μM. Minor changes in the l-tyrosine structure, including hydroxylation, dehydroxylation, phosphorylation, or decarboxylation, were found to lead to a strong decrease in CL. Using the excellent selectivity of the proposed method for l-tyrosine, we have developed a CL assay for measuring alkaline phosphatase activity in the range of 0.02-15 U/L with the limit of detection (LOD) of 4 mU/L using the nonchemiluminescent O-phospho-l-tyrosine as a substrate. Furthermore, the CL reaction was applied for tyrosinase activity assay as this enzyme can convert l-tyrosine to the nonchemiluminescent l-dopa. The decrease in CL is correlated with the tyrosinase activity in the range of 0.025-0.75 U/mL with an LOD of 1.5 mU/mL. Moreover, the tyrosinase activity assay was successfully applied for the determination of IC₅₀ of the tyrosinase inhibitors kojic acid and benzoic acid. Therefore, our novel pulse UV irradiation CL method for the determination of l-tyrosine was not only suitable for the determination of this vital amino acid but also extended to the successful determination of its producing and metabolizing enzymes and their inhibitors.

A sensitive chemiluminescence detection approach for determination of 2,4-dinitrophenylhydrazine derivatized aldehydes using online UV irradiation - luminol CL reaction. Application to the HPLC analysis of aldehydes in oil samples

Aldehydes are toxic carbonyl compounds that are identified in various matrices surrounding us. For instance, aldehydes could be formed during the cooking and frying of foods which affects the food quality and safety. Derivatization is a must for the determination of aldehydes as they lack intrinsic chromophoric groups. 2,4-Dinitrophenyl hydrazine (DNPH) is the most used derivatizing reagent for aldehydes and the formed hydrazones could be determined by either HPLC-UV or LC-MS. However, UV detection is non-sensitive, and the MS equipment is expensive and not widely available. Thus, herein we report a smart chemiluminescence (CL) detection method for the DNPH aldehydes derivatives. These derivatives are supposed to possess photosensitization ability due to the presence of strong chromophoric structures; nitrobenzene and phenyl hydrazone. Upon their UV irradiation, singlet oxygen is found to be produced which then converts the DNPH-aldehyde derivative into hydroperoxide. Next, the hydroperoxide reacts with luminol in an alkaline medium producing a strong CL. An HPLC system with online UV irradiation and online reaction with luminol followed by CL detection was constructed and used for the determination of aldehydes after their derivatization with DNPH. The developed method showed excellent sensitivity with detection limits down to 1.5-18.5 nM. The achieved sensitivity is superior to that obtained by HPLC-UV and LC-MS detection methods for DNPH-aldehydes derivatives. Additionally, our approach is an chemiluminogenic where the DNPH reagent itself does not produce CL which is an excellent advantage. The method was applied successfully for the determination of aldehydes in canola oil samples using simple liquid-liquid extraction showing good recovery (87.0-106.0%), accuracy (87.2-106.6), and precision (RSD≤10.2%). After analysis of fresh and heated oil samples, it was demonstrated that heating of oil, even for short time, strongly elevated the level of their aldehydes' content. At last, it was found that the results of the analysis of aldehydes in oil samples using the proposed method perfectly matched those obtained by a reference LC-MS method.

Detection of Hydroxyl Radicals Using Cerium Oxide/Graphene Oxide Composite on Prussian Blue

A composite sensor consisting of two separate inorganic layers of Prussian blue (PB) and a composite of cerium oxide nanoparticles (CeNPs) and graphene oxide (GO), is tested with •OH radicals. The signals from the interaction between the composite layers and •OH radicals are characterized using cyclic voltammetry (CV). The degradation of PB in the presence of H₂O₂ and •OH radicals is observed and its impact on the sensor efficiency is investigated. The results show that the composite sensor differentiates between the solutions with and without •OH radicals by the increase of electrochemical redox current in the presence of •OH radicals. The redox response shows a linear relation with the concentration of •OH radicals where the limit of detection, LOD, is found at 60 µM (100 µM without the PB layer). When additional composite layers are applied on the composite sensor to prevent the degradation of PB layer, the PB layer is still observed to be degraded. Furthermore, the sensor conductivity is found to decrease with the additional layers of composite. Although the CeNP/GO/PB composite sensor demonstrates high sensitivity with •OH radicals at low concentrations, it can only be used once due to the degradation of PB.

Development of luminol-fluorescamine-PVP chemiluminescence system and its application to sensitive tyrosinase determination

Fluorescamine is a popular fluorescent probe. We report for the first time that luminol chemiluminescence (CL) can be enhanced by fluorescamine in the presence of PVP. The CL intensity of luminol-fluorescamine-PVP is about 26 times stronger than that of luminol. Both the removal of oxygen and the addition of superoxide dismutase (SOD) decrease CL intensity, thiourea and NaN₃ have little effect on CL intensities, indicating that O₂^•- is critical for CL. Interestingly, o-quinone generated from phenol by tyrosinase obviously inhibited the CL intensity. Inspired by such quenching effect on the luminol-fluorescamine-PVP CL system, a sensitive CL sensing for the determination of tyrosinase activity was developed. The method can detect tyrosinase in the range of 0.07-1.5 μg mL^-1 (0.19-4.02 U mL^-1) with the detection limit of 0.035 μg mL^-1 (0.094 U mL^-1). Moreover, this method exhibits satisfied recoveries for the spiked human serum samples.

Protein-protected metal nanoclusters: An emerging ultra-small nanozyme

Protein-protected metal nanoclusters (MNCs), typically consisting of several to a hundred metal atoms with a protein outer layer used for protecting clusters from aggregation, are excellent fluorescent labels for biomedical applications due to their extraordinary photoluminescence, facile synthesis and good biocompatibility. Interestingly, many protein-protected MNCs have also been reported to exhibit intrinsic enzyme-like activities, namely peroxidase, oxidase and catalase activities, and are consequently used for biological analysis and environmental treatment. These findings have extended the horizon of protein-protected MNCs' properties as well as their application in various fields. Furthermore, in the field of nanozymes, protein-protected MNCs have emerged as an outstanding new addition. Due to their ultra-small size (<2 nm), they usually have higher catalytic activity, more suitable size for in vivo application, better biocompatibility and photoluminescence in comparison with large size nanozymes. In this review, we will systematically introduce the significant advances in this field and critically discuss the challenges that lie ahead. Ultra-small nanozymes based on protein-protected MNCs are on the verge of attracting great interest across various disciplines and will stimulate research in the fields of nanotechnology and biology. This article is characterized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Biology-Inspired Nanomaterials > Protein and Virus-Based Structures.

The mechanism and application of the protein-stabilized gold nanocluster sensing system

This review highlights sensing systems based on protein-Au NCs for the detection of various analytes and the corresponding sensing mechanisms.

Gold nanocluster-enhanced peroxynitrous acid chemiluminescence for high selectivity sensing of nitrite

The weak CL emission of peroxynitrous acid (ONOOH) produced from the reaction of nitrite with hydrogen peroxide in acidic medium was greatly enhanced by Au NCs.

Luminol chemiluminescence enhanced by copper nanoclusters and its analytical application

It was found that Cu nanoclusters could enhance the chemiluminescence (CL) emission from the luminol–hydrogen peroxide system in an alkaline medium.

Luminol-based bioluminescence imaging of mouse mammary tumors

Polymorphonuclear neutrophils (PMNs) are the most abundant circulating blood leukocytes. They are part of the innate immune system and provide a first line of defense by migrating toward areas of inflammation in response to chemical signals released from the site. Some solid tumors, such as breast cancer, also cause recruitment and activation of PMNs and release of myeloperoxidase. In this study, we demonstrate that administration of luminol to mice that have been transplanted with 4T1 mammary tumor cells permits the detection of myeloperoxidase activity, and consequently, the location of the tumor. Luminol allowed detection of activated PMNs only two days after cancer cell transplantation, even though tumors were not yet palpable. In conclusion, luminol-bioluminescence imaging (BLI) can provide a pathway towards detection of solid tumors at an early stage in preclinical tumor models.

An analytical investigation of 24 oxygenated-PAHs (OPAHs) using liquid and gas chromatography-mass spectrometry

We developed two independent approaches for separation and quantitation of 24 oxygenated polycyclic aromatic hydrocarbons (OPAHs) using both liquid chromatography-atmospheric pressure chemical ionization/mass spectrometry (LC-APCI/MS) and gas chromatography-electron impact/mass spectrometry (GC-EI/MS). Building on previous OPAH research, we examined laboratory stability of OPAHs, improved existing method parameters, and compared quantification strategies using standard addition and an internal standard on an environmental sample. Of 24 OPAHs targeted in this research, 19 compounds are shared between methods, with 3 uniquely quantitated by GC-EI/MS and 2 by LC-APCI/MS. Using calibration standards, all GC-EI/MS OPAHs were within 15 % of the true value and had less than 15 % relative standard deviations (RSDs) for interday variability. Similarly, all LC-APCI/MS OPAHs were within 20 % of the true value and had less than 15 % RSDs for interday variability. Instrument limits of detection ranged from 0.18 to 36 ng mL⁻¹ on the GC-EI/MS and 2.6 to 26 ng mL⁻¹ on the LC-APCI/MS. Four standard reference materials were analyzed with each method, and we report some compounds not previously published in these materials, such as perinaphthenone and xanthone. Finally, an environmental passive sampling extract from Portland Harbor Superfund, OR was analyzed by each method using both internal standard and standard addition to compensate for potential matrix effects. Internal standard quantitation resulted in increased precision with similar accuracy to standard addition for most OPAHs using 2-fluoro-fluorenone-¹³C as an internal standard. Overall, this work improves upon OPAH analytical methods and provides some considerations and strategies for OPAHs as focus continues to expand on this emerging chemical class.

Figure

Microplate analytical method for quinones by pulse photo-irradiation and chemiluminescence detection

Quinones are widely distributed in nature and have various bioactivities. Besides, quinones are also considered as toxicological intermediates which cause severe dangerous effects. Hereby, a sensitive, simple, and rapid method is reported for quinones determination. The proposed method employed time resolved fluorescence (TRF) microplate reader based chemiluminescent (CL) detection for the first time as a novel approach for measurement. Under pulse photo-irradiation, the unique photochemical characteristic of quinones is exploited to liberate reactive oxygen species (ROS) which reacted with photosensitized CL reagent. L-012, luminol analogue, was selected for its high sensitivity. Under our investigation, para-quinones showed high CL response when compared to ortho-quinones. A linear response was obtained for studied quinone concentrations in the range of 0.05-50 μM for 1,4-naphthquinone and of 0.05-150 μM for 2-methyl-1,4-naphthoquinone (menadione) and 9,10-anthraquinone with detection limit (blank + 3SD) of 0.01 μM. The proposed method allowed the rapid determination of large number of samples in very short time (96 sample/125 s). The proposed method was successfully applied for determination of menadione in spiked human serum.

Kinetic-spectrometric three-dimensional chemiluminescence as an effective analytical tool. Application to the determination of benzo(a)pyrene

Kinetic and spectroscopic methods were used in combination in this work to develop a new analytical tool for use in chemiluminescence detection processes. Specifically, time-resolved chemiluminescence was used jointly with a stopped-flow assembly in order to monitor the chemiluminescence produced in the oxidation of bis(2,4-dinitrophenyl)oxalate (DNPO) by hydrogen peroxide in the presence of a polycyclic aromatic hydrocarbon. Recording of successive two-dimensional spectra during the emission process and treating the acquired spectral data with dedicated software allows the obtainment of three-dimensional chemiluminescence spectra, a result of the joint use of two analytical techniques. Thus, using a flow cell specifically designed for direct coupling to the charge-coupled device (CCD) detector increases the emission intensity without the need for fibre optics. Also, using dedicated software to process the acquired two-dimensional spectra affords a comprehensive kinetic and spectroscopic characterization of the chemiluminescence signal via the three-dimensional spectrum previously obtained. The analytical potential of this new tool was assessed by application to the chemiluminescent reaction between a peroxyoxalate and an oxidant (hydrogen peroxide); the reaction is induced by benzo(a)pyrene, which was used to determine this polycyclic aromatic hydrocarbon in an organic solvent. A linear calibration graph was obtained between 0.5 and 20 mg L(-1). The limit of detection found to be 3.97 μg L(-1) and a relative standard error of 0.64% and a relative standard deviation of 1.87% were obtained. The results reached testify to the usefulness of the proposed analytical tool for simple determinations and its potential for the resolution of complex mixtures or determinations in complex matrices.

Evaluation of the effects of ozone oxidation on redox-cycling activity of two-stroke engine exhaust particles

The effect of oxidation on the redox-cycling activity of engine exhaust particles is examined. Particles obtained from a two-stroke gasoline engine were oxidized in a flow tube with ozone on a one-minute time scale both in the presence and absence of substantial gas-phase exhaust components. Whereas ozone concentrations were high, the ozone exposures were approximately equivalent to 60 ppb ozone for 2-8 h. Oxidation led to substantial increases in redox-cycling of aqueous extracts of filtered particles, as measured using the dithiothreitol (DTT) assay. Increases in redox activity when the entire exhaust was oxidized were primarily driven by deposition of redox-active secondary organic aerosol (SOA), resulting in an upper-limit DTT activity of 8.6 ± 2.0 pmol DTT consumed per min per microgram of particles, compared to 0.73 ± 0.60 pmol min(-1) μg(-1) for fresh, unoxidized exhaust particles. Redox-cycling activity reached higher levels when VOC denuded exhaust was oxidized, with the highest DTT activity observed being 16.7 ± 1.6 pmol min(-1) μg(-1) with no upper limit reached for the range of ozone exposures used in this study. Our results provide laboratory support for the hypothesis that the toxicity of engine combustion particles due to redox-cycling may increase as they age in the atmosphere.

[Development of selective determination methods for quinones with fluorescence and chemiluminescence detection and their application to environmental and biological samples]

Quinones are compounds that have various characteristics such as a biological electron transporter, an industrial product and a harmful environmental pollutant. Therefore, an effective determination method for quinones is required in many fields. This review describes the development of sensitive and selective determination methods for quinones based on some detection principles and their application to analyses in environmental, pharmaceutical and biological samples. Firstly, a fluorescence method was developed based on fluorogenic derivatization of quinones and applied to environmental analysis. Secondly, a luminol chemiluminescence method was developed based on generation of reactive oxygen species through the redox cycle of quinone and applied to pharmaceutical analysis. Thirdly, a photo-induced chemiluminescence method was developed based on formation of reactive oxygen species and fluorophore or chemiluminescence enhancer by the photoreaction of quinones and applied to biological and environmental analyses.

Determination of 9, 10-phenanthrenequinone in airborne particulates by High-Performance Liquid Chromatography with post-column fluorescence derivatization using 2-aminothiophenol

9, 10-Phenanthrenequinone (PQ) is regarded as a harmful environmental pollutant and its presence has been reported in atmospheric environment. The measurement of PQ in environment should be necessary to evaluate the influence of PQ on human health. We found that PQ reacted with 2-aminothiophenol under acidic condition to form fluorescent derivative which emits green fluorescence at 510nm. Based on this reaction, a simple and rapid determination method for PQ was developed by HPLC with post-column derivatization and fluorescence detection. By the proposed HPLC system, PQ was detected at 24min and the detection limit was 67fmol/injection (S/N=3). The proposed method was able to determine the atmospheric PQ concentrations by the direct injection of extract from airborne particulates.