Supramolecular solvent-based extraction of benzimidazolic fungicides from natural waters prior to their liquid chromatographic/fluorimetric determination

Rapid and specific detection of thiabendazole: enzymatic digestion-enabled fluorescent aptasensor

Thiabendazole, a widely used broad-spectrum fungicide in agriculture, poses risks to human health. To monitor its presence in water, we propose a fluorescent aptasensor utilizing Escherichia coli exonuclease I (Exo I). The findings demonstrate a linear correlation between thiabendazole concentrations and digestion percentage, with a detection limit (LOD) exceeding 1 µM and a determination coefficient (R2) of 0.959. This aptamer-based fluorescence spectroscopy detection system holds promise for a rapid, specific, and sensitive analysis of thiabendazole in environmental waters and food matrices.

Review of Characteristics and Analytical Methods for Determination of Thiabendazole

Thiabendazole (TBZ) is a fungicide and anthelmintic drug commonly found in food products. Due to its toxicity and potential carcinogenicity, its determination in various samples is important for public health. Different analytical methods can be used to determine the presence and concentration of TBZ in samples. Liquid chromatography (LC) and its subtypes, high-performance liquid chromatography (HPLC) and ultra-high-performance liquid chromatography (UHPLC), are the most commonly used methods for TBZ determination representing 19%, 18%, and 18% of the described methods, respectively. Surface-enhanced Raman spectroscopy (SERS) and fluorimetry are two more methods widely used for TBZ determination, representing 13% and 12% of the described methods, respectively. In this review, a number of methods for TBZ determination are described, but due to their limitations, there is a high potential for the further improvement and development of each method in order to obtain a simple, precise, and accurate method that can be used for routine analysis.

Sustainable green solvents for microextraction techniques: Recent developments and applications

The development and application of alternative green solvents in analytical techniques consist of trends in sample preparation, since this subject represents an important step toward sustainability in experimental procedures. This review is focused on the main theoretical aspects related to deep eutectic solvents (DES), switchable hydrophilicity solvents (SHS) and supramolecular solvents (SUPRAS). Recent applications are highlighted, particularly for the extraction of different analytes from environmental, biological and food matrices. Moreover, novel configurations are emphasized, aiming for efficient, automated and high-throughput procedures. This review also provides some critical points regarding the use of these solvents and their green aspects.

Supramolecular Solvent-Based Microextraction of Selected Anticonvulsant and Nonsteroidal Anti-Inflammatory Drugs from Sediment Samples

The increase in the production and consumption of pharmaceuticals increases their presence in the global environment, which may result in direct threats to living organisms. For this reason, there is a need for new methods to analyze drugs in environmental samples. Here, a new procedure for separating and determining selected drugs (diclofenac, ibuprofen, and carbamazepine) from bottom sediment and water samples was developed. Drugs were determined by ultra-high performance liquid chromatography coupled with an ultraviolet detector (UHPLC-UV). In this work, a universal and single-step sample treatment, based on supramolecular solvents (SUPRAS), was proposed to isolate selected anticonvulsants and nonsteroidal anti-inflammatory drugs (NSAIDs) from sediment samples. The following parameters were experimentally selected: composition of the supramolecular solvent (composition THF:H₂O (v/v), amount of decanoic acid), volume of extractant, sample mass, extraction time, centrifugation time, and centrifugation speed. Finally, the developed procedure was validated. A Speedisk procedure was also developed to extract selected drugs from water samples. The recovery of analytes using the SUPRAS procedure was in the range of 88.8-115%, while the recoveries of the Speedisk solid-phase extraction procedure ranged from 81.0-106%. The effectiveness of the sorption of the tested drugs by sediment was also examined.

Twenty years of supramolecular solvents in sample preparation for chromatography: achievements and challenges ahead

Supramolecular solvents (SUPRAS) have progressively become a suitable alternative to organic solvents for sample preparation in chromatographic analysis. The inherent properties of these nanostructured solvents (e.g. different polarity microenvironments, multiple binding sites, possibility of tailoring their properties, etc.) offer multiple opportunities for the development of innovative sample treatment platforms not approachable by conventional solvents. In this review, major achievements attained in the combination SUPRAS-chromatography in the last 20 years as well as the challenges that should be addressed in the near future are critically discussed. Among achievements, particular attention is paid to the theoretical and practical knowledge gained that has helped make substantial progress in the area. In this respect, advances in the understanding of the mechanisms involved in SUPRAS formation and SUPRAS-solute interactions driving extractions are discussed, with a view to the setting up of knowledge-based extraction procedures. Likewise, the strategies followed to improve the compatibility of SUPRAS extracts with liquid and gas chromatography and adapt SUPRAS-based extractions to different formats are presented. Ongoing efforts to apply SUPRAS in multicomponent extractions and synthesize tailored SUPRAS for the development of innovative sample treatments are highlighted. Among challenges identified, discussion is focused on the automation of SUPRAS-based sample treatment and the elucidation of SUPRAS nanostructures, which are considered essential for their acceptance in routine labs and the design of tailored SUPRAS with programmed functions. Graphical abstract.

Supramolecular Solvent-Based Liquid Phase Microextraction Combined with Ion-Pairing Reversed-Phase HPLC for the Determination of Quats in Vegetable Samples

In this study, we used anion supramolecular solvent (SUPRAS) prepared from a mixture of an anionic surfactant, sodium dodecyl sulfate (SDS), and a cationic surfactant, tetrabutylammonium bromide (TBABr), as the extraction solvent in liquid phase microextraction (LPME) of paraquat (PQ) and diquat (DQ). The enriched PQ and DQ in the SUPRAS phase were simultaneously analyzed by ion-pairing reversed-phase high performance liquid chromatography. PQ and DQ were successfully extracted by LPME via electrostatic interaction between the positive charge of the quats and the negative charge of SUPRAS. PQ, DQ, and ethyl viologen (the internal standard) were separated within 15 min on a C18 column, with the mobile phase containing 1-dodecanesulfonic acid and triethylamine, via UV detection. The optimized conditions for the extraction of 10 mL aqueous solution are 50 μL of SUPRAS prepared from a mixture of SDS and TBABr at a mole ratio of 1:0.5, vortexed for 10 s at 1800 rpm, and centrifugation for 1 min at 3500 rpm. The obtained enrichment factors were 22 and 26 with limits of detection of 1.5 and 2.8 µg L^-1 for DQ and PQ, respectively. The precision was good with relative standard deviations less than 3.86%. The proposed method was successfully applied for the determination of PQ and DQ in vegetable samples and recoveries were found in the range of 75.0% to 106.7%.

Development of supramolecular solvent based microextraction prior to high performance liquid chromatography for simultaneous determination of phenols in environmental water

SUPRAS based microextraction for phenols.

Supramolecular nanosolvent-based hollow fiber liquid phase microextraction as a novel method for simultaneous preconcentration of acidic, basic and amphiprotic pollutants

In this study, for the first time, coextraction of acidic, basic and amphiprotic pollutants was performed using supramolecular nano solvent-based hollow fiber liquid phase microextraction.

Modification of cellulose paper with polydopamine as a thin film microextraction phase for detection of nitrophenols in oil samples

Polydopamine cellulose paper was used as a novel extraction phase to detect nitrophenols in oil samples.

Use of magnetic effervescent tablet-assisted ionic liquid dispersive liquid-liquid microextraction to extract fungicides from environmental waters with the aid of experimental design methodology

In this work, a novel effervescence-assisted microextraction technique was proposed for the detection of four fungicides. This method combines ionic liquid-based dispersive liquid-liquid microextraction with the magnetic retrieval of the extractant. A magnetic effervescent tablet composed of Fe3O4 magnetic nanoparticles, sodium carbonate, sodium dihydrogen phosphate and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonimide) was used for extractant dispersion and retrieval. The main factors affecting the extraction efficiency were screened by a Plackett-Burman design and optimized by a central composite design. Under the optimum conditions, good linearity was obtained for all analytes in pure water model and real water samples. Just for the pure water, the recoveries were between 84.6% and 112.8%, the limits of detection were between 0.02 and 0.10 μg L(-1) and the intra-day precision and inter-day precision both are lower than 4.9%. This optimized method was successfully applied in the analysis of four fungicides (azoxystrobin, triazolone, cyprodinil, trifloxystrobin) in environmental water samples and the recoveries ranged between 70.7% and 105%. The procedure promising to be a time-saving, environmentally friendly, and efficient field sampling technique.

Supramolecular solvent-based dispersive liquid–liquid microextraction of copper from water and hair samples

A supramolecular solvent based dispersive liquid–liquid microextraction (SM-DLLME) procedure has been established for the separation and preconcentration of Cu(ii) before its determination by microsampling flame atomic absorption spectrometry.

Determination of triazole fungicides in environmental water samples by high performance liquid chromatography with cloud point extraction using polyethylene glycol 600 monooleate

A preconcentration technique known as cloud point extraction was developed for the determination of trace levels of triazole fungicides tricyclazole, triadimefon, tebuconazole and diniconazole in environmental waters. The triazole fungicides were extracted and preconcentrated using polyethylene glycol 600 monooleate (PEG600MO) as a low toxic and environmentally benign nonionic surfactant, and determined by high performance liquid chromatography/ultraviolet detection (HPLC-UV). The extraction conditions were optimized for the four triazole fungicides as follows: 2.0 wt% PEG600MO, 2.5 wt% Na(2)SO(4), equilibration at 45°C for 10 min, and centrifugation at 2000 rpm (533 × g) for 5 min. The triazole fungicides were well separated on a reversed-phase kromasil ODS C(18) column (250 mm × 4.6 mm, 5 μm) with gradient elution at ambient temperature and detected at 225 nm. The calibration range was 0.05-20 μg L(-1) for tricyclazole and 0.5-20 μg L(-1) for the other three classes of analytes with the correlation coefficients over 0.9992. Preconcentration factors were higher than 60-fold for the four selected fungicides. The limits of detection were 6.8-34.5 ng L(-1) (S/N=3) and the recoveries were 82.0-96.0% with the relative standard deviations of 2.8-7.8%.