Calibration of chromatographic systems for quantitative prediction of chromatography of homopolymers

Alternative calibration techniques for counteracting the matrix effects in GC-MS-SPE pesticide residue analysis - a statistical approach

This paper investigates the efficiency of application of four different multivariate calibration techniques, namely matrix-matched internal standard (MMIS), matrix-matched external standard (MMES), solvent-only internal standard (SOIS) and solvent-only external standard (SOES) on the detection and quantification of 20 organochlorine compounds from high, low and blank matrix water sample matrices by Gas Chromatography-Mass Spectrometry (GC-MS) coupled to solid phase extraction (SPE). Further statistical testing, using Statistical Package for the Social Science (SPSS) by applying MANOVA, T-tests and Levene's F tests indicates that matrix composition has a more significant effect on the efficiency of the analytical method than the calibration method of choice. Matrix effects are widely described as one of the major sources of errors in GC-MS multiresidue analysis. Descriptive and inferential statistics proved that the matrix-matched internal standard calibration was the best approach to use for samples of varying matrix composition as it produced the most precise average mean recovery of 87% across all matrices tested. The use of an internal standard calibration overall produced more precise total recoveries than external standard calibration, with mean values of 77% and 64% respectively. The internal standard calibration technique produced a particularly high overall standard deviation of 38% at 95% confidence level indicating that it is less robust than the external standard calibration method which had an overall standard error of 32% at 95% confidence level. Overall, the matrix-matched external standard calibration proved to be the best calibration approach for analysis of low matrix samples which consisted of the real sample matrix as it had the most precise recovery of 98% compared to other calibration approaches for the low-matrix samples.

Transfer-volume effects in two-dimensional chromatography: adsorption-phenomena in second-dimension size-exclusion chromatography

Gradient-elution LC × LC is a valuable technique for the characterization of complex biological samples as well as for synthetic polymers. Breakthrough and viscous fingering may yield misleading information on the sample characteristics or deteriorate separation. In LC × SEC another phenomenon may jeopardize the separation. If the analytes adsorb on the SEC column under the injection-plug conditions, peak splitting may occur. In LC × LC the effluent from the first column is the sample solvent for the analytes injected into the second dimension. If a gradient-elution LC × SEC setup is used (i.e. if reversed-phase gradient-elution LC is coupled to organic SEC and if normal-phase gradient-elution LC is coupled to SEC with a polar solvent), the percentage of weak solvent may be significant, especially at short analysis times. In this case adsorption in the first-dimension-effluent zone on the second-dimension SEC column can become an issue and two peaks--the first eluting in size-exclusion mode and the second undergoing adsorption--can be obtained. The work presented in this paper documents peak splitting in LC × SEC of polymers. The adsorption of the polymer on the size-exclusion column was proven in one-dimensional isocratic runs. The observed effects were modeled and visualized through simulation. Studies on the influence of the transfer volume were carried out. Keeping the transfer volume as small as possible helped to minimize peak splitting due to adsorption.