Monolith peptide affinity chromatography for quantification of immunoglobulin M

Development of histidine-tagged cyclic peptide functionalized monolithic material for the affinity purification of antibodies in biological matrices

The rapidly increasing applications of monoclonal antibodies (mAbs) in therapy have necessitated the development of mAb production and purification technologies for both academic and industrial usage. Herein, a histidine-tagged cyclic peptide (HHHHHHGSGSGSDC*AWHLGELVWC*T, the disulfide-bonded cysteines of which are indicated by asterisks, named HT25-cyclopeptide) functionalized monolithic material was developed by the metal ion chelation-based approach. The resulting material possessed suitable affinity and peptide ligand density (13.8 mg peptide ligand per mL of material), good porosity (67.1 %), acceptable specific surface area (52.95 m²/g), and lots of macropores (4.13 μm). Moreover, excellent antibody-specific selectivity, comparable or even better binding capacity (for dried material, maximum static binding capacity and dynamic binding capacity are about 119.3 mg/g and 17.05 mg/g, respectively) for antibody compared to previously developed affinity materials, acceptable resistance to trypsin digestion, and negligible nonspecific protein adsorption, were also achieved on this novel monolithic material. Compared with the corresponding cyclic peptide-based sepharose material, milder elution conditions were employed for the HT25-cyclopeptide-based monolithic material, which could effectively prevent the aggregation and denaturation of the enriched antibodies. This novel material was then successfully applied to the affinity enrichment and purification of mAbs (including infliximab and rituximab) in different cell culture media or IgG in human serum.

Poly(Hydroxyethyl Methacrylate) Immunoaffinity Cryogel Column for the Purification of Human Immunoglobulin M

Human immunoglobulin M (hIgM) antibodies are considered as hopeful tools for diseases therapy. Therefore, chromatography approaches are used to purify hIgM with a single step. In this study, we prepared a poly(hydroxyethyl methacrylate) based immunoaffinity p(HEMA-I) cryogel column by using cyanamide to immobilize antihuman immunoglobulin on the p(HEMA) cryogel for purification of hIgM in aqueous solution and artificial human plasma. The characterization of the p(HEMA) cryogel column was performed by using a scanning electron microscope (SEM), micro-computerized tomography (µ-CT), Fourier transform infrared spectroscopy (FTIR), swelling degree and macro-porosity. Further, the optimizations of various parameters were performed such as, pH, ionic strength, temperature and concentration of hIgM in aqueous solutions. In addition, the Langmuir adsorption model was supported by experimental results. Maximum adsorbed amount of hIgM corresponded to 11.1 mg/g at pH 5.75 [morpholino ethanesulfonic acid (MES buffer)]. Our results indicated that the p(HEMA-I) cryogel column can be reused at least 10 times without significant loss in adsorption capacity. As a natural source, artificial human plasma was selected for hIgM adsorption and the purity of hIgM was evaluated using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE).

Monolith affinity chromatography for the rapid quantification of a single-chain variable fragment immunotoxin

We developed a novel analytical method for concentration determination of tandem single‐chain antibody diphtheria toxin (immunotoxin). The method is based on polymethacrylate monoliths with Protein L ligands as the binding moiety. Different buffers were tested for elution of the Protein L‐bound immunotoxin and 4.5 M guanidinium hydrochloride performed best. We optimized the elution conditions and the method sequence resulting in a fast and robust method with a runtime <10 min. Fast determination of immunotoxin is critical if any process decisions rely on this data. We determined method performance and a lower limit of detection of 27 μg/mL and a lower limit of quantification of 90 μg/mL was achieved. The validity of the method in terms of residual analysis, precision, and repeatability was proven in a range from 100 to 375 μg/mL. The short runtime and ease of use of a high‐performance liquid chromatography method is especially useful for a process analytical tool approach. Bioprocesses related to immunotoxin where fermentation or other process parameters can be adjusted in accordance to the immunotoxin levels will be benefited from this method to achieve the highest possible purity and productivity.

Development and characteristics of polymer monoliths for advanced LC bioscreening applications: A review

Biomedical research advances over the past two decades in bioseparation science and engineering have led to the development of new adsorbent systems called monoliths, mostly as stationary supports for liquid chromatography (LC) applications. They are acknowledged to offer better mass transfer hydrodynamics than their particulate counterparts. Also, their architectural and morphological traits can be tailored in situ to meet the hydrodynamic size of molecules which include proteins, pDNA, cells and viral targets. This has enabled their development for a plethora of enhanced bioscreening applications including biosensing, biomolecular purification, concentration and separation, achieved through the introduction of specific functional moieties or ligands (such as triethylamine, N,N-dimethyl-N-dodecylamine, antibodies, enzymes and aptamers) into the molecular architecture of monoliths. Notwithstanding, the application of monoliths presents major material and bioprocess challenges. The relationship between in-process polymerisation characteristics and the physicochemical properties of monolith is critical to optimise chromatographic performance. There is also a need to develop theoretical models for non-invasive analyses and predictions. This review article therefore discusses in-process analytical conditions, functionalisation chemistries and ligands relevant to establish the characteristics of monoliths in order to facilitate a wide range of enhanced bioscreening applications. It gives emphasis to the development of functional polymethacrylate monoliths for microfluidic and preparative scale bio-applications.

Monolithic ion exchange chromatographic methods for virus purification

We report an ion exchange chromatographic purification method powerful for preparation of virus particles with ultrapure quality. The technology is based on large pore size monolithic anion exchangers, quaternary amine (QA) and diethyl aminoethyl (DEAE). These were applied to membrane-containing icosahedral bacteriophage PRD1, which bound specifically to both matrices. Virus particles eluted from the columns retained their infectivity, and were homogenous with high specific infectivity. The yields of infectious particles were up to 80%. Purified particles were recovered at high concentrations, approximately 5mg/ml, sufficient for virological, biochemical and structural analyses. We also tested the applicability of the monolithic anion exchange purification on a filamentous bacteriophage phi05_2302. Monolithic ion exchange chromatography is easily scalable and can be combined with other preparative virus purification methods.