Separation of phosphorylated peptides utilizing dual pH- and temperature-responsive chromatography

Open tubular capillary electrochromatography with dual-responsive polymer as coating for separation of chromones

Fabricating polymeric coatings that are responsive to multiple/dual stimuli is crucial and remains a major challenge in the development of highly efficient open tubular capillary electrochromatography (OT-CEC). In this study, a pH and temperature-responsive block copolymer, poly(styrene-maleic anhydride 2-dimethylamino ethyl methacrylate), P(St-MAn-DMAEMA), was designed and synthesized. Using P(St-MAn-DMAEMA) as the coating, an OT-CEC protocol was constructed for the analysis of chromones. The morphology and hydrophobicity-hydrophilicity of the polymeric coating could change via varying the environmental conditions, affecting the separation efficiency of OT-CEC. Interestingly, the best performance of OT-CEC was achieved at pH 9.7 and 45 °C via tuning the interactions between the coating and the analytes. Additionally, the proposed OT-CEC method exhibited a good linear range for the detection of the three test chromones from 10.0 to 100.0 μM, with all correlation coefficients (R2) >0.997. The coatings also had good stability and reusability. This work provides an approach for the preparation of new multiple-stimuli-responsive polymeric coatings for the establishment of OT-CEC systems.

Thermoresponsive interfaces obtained using poly(N-isopropylacrylamide)-based copolymer for bioseparation and tissue engineering applications

Poly(N-isopropylacrylamide) (PNIPAAm) is the most well-known and widely used stimuli-responsive polymer in the biomedical field owing to its ability to undergo temperature-dependent hydration and dehydration with temperature variations, causing hydrophilic and hydrophobic alterations. This temperature-dependent property of PNIPAAm provides functionality to interfaces containing PNIPAAm. Notably, the hydrophilic and hydrophobic alterations caused by the change in the temperature-responsive property of PNIPAAm-modified interfaces induce temperature-modulated interactions with biomolecules, proteins, and cells. This intrinsic property of PNIPAAm can be effectively used in various biomedical applications, particularly in bioseparation and tissue engineering applications, owing to the functionality of PNIPAAm-modified interfaces based on the temperature modulation of the interaction between PNIPAAm-modified interfaces and biomolecules and cells. This review focuses on PNIPAAm-modified interfaces in terms of preparation method, properties, and their applications. Advances in PNIPAAm-modified interfaces for existing and developing applications are also summarized.

Effective Separation for New Therapeutic Modalities Utilizing Temperature-responsive Chromatography

In recent years, drug discovery and therapeutics trends have shifted from a focus on small-molecule compounds to biopharmaceuticals, genes, cell therapy, and regenerative medicine. Therefore, new approaches and technologies must be developed to respond to these changes in medical care. To achieve this, we applied a temperature-responsive separation system to purify a variety of proteins and cells. We developed a temperature-responsive chromatography technique based on a poly(N-isopropylacrylamide) (PNIPAAm)-grafted stationary phase. This method may be applied to various types of protein and cell separation applications by optimizing the properties of the modified polymers used in this system. Therefore, the developed temperature-responsive HPLC columns and temperature-responsive solid-phase extraction (TR-SPE) columns can be an effective separation tool for new therapeutic modalities such as monoclonal antibodies, nucleic acid drugs, and cells.

Nano Encapsulated Curcumin: And Its Potential for Biomedical Applications

Curcumin, a yellow-colored polyphenol extracted from the rhizome of turmeric root, is commonly used as a spice and nutritional supplement. It exhibits many pharmacological activities such as anti-inflammatory, anti-bacterial, anti-cancer, anti-Alzheimer, and anti-fungal. However, the therapeutic application of curcumin is limited by its extremely low solubility in aqueous buffer, instability in body fluids, and rapid metabolism. Nano delivery system has shown excellent potential to improve the solubility, biocompatibility and therapeutic effect of curcumin. In this review, we focus on the recent development of nano encapsulated curcumin and its potential for biomedical applications.

New Opportunities and Challenges of Smart Polymers in Post-Translational Modification Proteomics

Protein post-translational modifications (PTMs), which denote covalent additions of various functional groups (e.g., phosphate, glycan, methyl, or ubiquitin) to proteins, significantly increase protein complexity and diversity. PTMs play crucial roles in the regulation of protein functions and numerous cellular processes. However, in a living organism, native PTM proteins are typically present at substoichiometric levels, considerably impeding mass-spectrometry-based analyses and identification. Over the past decade, the demand for in-depth PTM proteomics studies has spawned a variety of selective affinity materials capable of capturing trace amounts of PTM peptides from highly complex biosamples. However, novel design ideas or strategies are urgently required for fulfilling the increasingly complex and accurate requirements of PTM proteomics analysis, which can hardly be met by using conventional enrichment materials. Considering two typical types of protein PTMs, phosphorylation and glycosylation, an overview of polymeric enrichment materials is provided here, with an emphasis on the superiority of smart-polymer-based materials that can function in intelligent modes. Moreover, some smart separation materials are introduced to demonstrate the enticing prospects and the challenges of smart polymers applied in PTM proteomics.

Temperature-responsive Solid-phase Extraction Column for Biological Sample Pretreatment

We have developed a novel solid-phase extraction (SPE) system utilizing a temperature-responsive polymer hydrogel-modified stationary phase. Aminopropyl silica beads (average diameter, 40 - 64 μm) were coated with poly(N-isopropylacrylamide) (PNIPAAm)-based thermo-responsive hydrogels. Butyl methacrylate (BMA) and N,N-dimethylaminopropyl acrylamide (DMAPAAm) were used as the hydrophobic and cationic monomers, respectively, and copolymerized with NIPAAm. To evaluate the use of this SPE cartridge for the analysis of drugs and proteins in biological fluids, we studied the separation of phenytoin and theophylline from human serum albumin (HSA) as a model system. The retention of the analytes in an exclusively aqueous eluent could be modulated by changing the temperature and salt content. These results indicated that this temperature-responsive SPE system can be applied to the pretreatment of biological samples for the measurement of serum drug levels.

Thermo- and pH-responsive polymer brushes-grafted gigaporous polystyrene microspheres as a high-speed protein chromatography matrix

Dual thermo- and pH-responsive chromatography has been proposed using poly(N-isopropylacrylamide-co-butyl methacrylate-co-N,N-dimethylaminopropyl acrylamide) (P(NIPAM-co-BMA-co-DMAPAAM)) brushes grafted gigaporous polystyrene microspheres (GPM) as matrix. Atom transfer radical polymerization (ATRP) initiator was first coupled onto GPM through Friedel-Crafts acylation with 2-bromoisobutyryl bromide. The dual-responsive polymer brushes were then grafted onto GPM via surface-initiated ATRP. The surface composition, gigaporous structure, protein adsorption and dual-responsive chromatographic properties of the matrix (GPM-P(NIPAM-co-BMA-co-DMAPAAM) were characterized in detail. Results showed that GPM were successfully grafted with thermoresponsive cationic polymer brushes and that the gigaporous structure was well maintained. A column packed with GPM-P(NIPAM-co-BMA-co-DMAPAAM presented low backpressure, good permeability and appreciable thermo-responsibility. By changing pH of the mobile phase and temperature of the column in turn, the column can separate three model proteins at the mobile phase velocity up to 2528cmh(-1). A separation mechanism of this matrix was also proposed. All results indicate that the dual thermo- and pH-responsive chromatography matrix has great potentials in 'green' high-speed protein chromatography.

Thermoresponsive-polymer-based materials for temperature-modulated bioanalysis and bioseparations

In this review, bioseparations using thermoresponsive polymers are summarized. Thermoresponsive chromatography for separating bioactive compounds and proteins, and cell separations using thermoresponsive polymers and their properties are reviewed.

Tunable temperature responsive liquid chromatography through thiolactone-based immobilization of poly(N-isopropylacrylamide)

A straightforward and efficient functionalization of aminopropylsilica with polymeric structures is described for the development of temperature responsive stationary phases applicable in purely aqueous liquid chromatography. The immobilization of the thermoresponsive polymers involves a thiolactone-based ring opening using the primary amines in aminopropylsilica, with a simultaneous one-pot, thiol-ene functionalization with an acrylate of choice. This mild, straightforward and modular grafting process results in high polymer coupling yields. By variation of the acrylate for the thiol-ene reaction, different stationary phases can be readily obtained. Two stationary phases as a result of the modular modification of aminopropylsilica were evaluated with test mixtures of hydrophobic analytes and a mixture of di- and tripeptides. Analyses using the 5μm material packed in 10cm×4.6mm columns revealed high hydrophobic retention, which proved adaptable as a function of the temperature in aqueous mobile phases. High versus low retention were obtained at temperatures above and below the lower critical solution temperature of the polymer, respectively. Moreover, the columns depict potential for diastereoisomeric peptide separation. Finally, the lower retention, observed when using PEGylated silica, illustrates the potential of the approach for modular stationary phase tuning.

Multi-Stimuli-Responsive Polymeric Materials

Stimuli-responsive materials are of immense importance because of their ability to undergo alteration of their properties in response to their environment. The properties of such materials can be tuned by subtle adjustments in temperature, pH, light, and so forth. Among such smart materials, multi-stimuli-responsive polymeric materials are of pronounced significance as they offer a wide range of applications and their properties can be tuned through several mechanisms. Here, we aim to highlight some recent studies showcasing the multi-stimuli-responsive character of these polymers, which are still relatively little known compared to their single-stimuli-responsive counterpart.

Effects of terminal group and chain length on temperature-responsive chromatography utilizing poly(N-isopropylacrylamide) synthesized via RAFT polymerization

Even using the same homo poly(N-isopropylacrylamide) immobilized silica beads as stationary phases, terminal functional group and chain length significantly affected temperature-dependent elution behavior of steroids.

Temperature-responsive smart packing materials utilizing multi-functional polymers

Polymers that respond to small changes in environmental stimuli with large, sometimes discontinuous changes in their physical state or properties, are often called "smart" polymers. Poly(N-isopropylacrylamide), PNIPAAm, is one of the most representative smart polymer that exhibits a thermally reversible soluble-insoluble change in the vicinity of its lower critical solution temperature (LCST) at 32°C in aqueous solution. Temperature-responsive chromatography for the separation of biomolecules utilizing the poly(N-isopropylacrylamide) (PNIPAAm)-modified stationary phase is performed with an aqueous mobile phase without using an organic solvent. The surface properties and function of the stationary phase are controlled by external temperature changes without changing the mobile-phase composition. The separation of the biomolecules, such as nucleotides, was achieved by a dual temperature- and pH-responsive chromatography system. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase. Additionally, we also prepared functional copolymers composed of N-isopropylacrylamide (NIPAAm) and amino acid derivative or naphthyl alanine derivative, which have temperature-responsiveness and molecular recognition. These separation systems would have potential applications in the separation of biomolecules.

Temperature-Responsive Fluorescence Polymer Probes with Accurate Thermally Controlled Cellular Uptakes

Poly(N-isopropylacrylamide) (PNIPAAm)-based temperature-responsive fluorescence polymer probes were developed using radical polymerization, with 3-mercaptopropionic acid as the chain-transfer agent, followed by activation of terminal carboxyl groups with N-hydroxysuccinimide and reaction with 5-aminofluorescein (FL). The lower critical solution temperatures (LCSTs) of the resulting fluorescent polymer probes differed depending on the copolymer composition, and had a sharp phase-transition (hydrophilic/hydrophobic) boundary at the LCST. The cellular uptakes of the fluorescent polymer probes were effectively suppressed below the LCST, and increased greatly above the LCST. In particular, the cellular uptake of a copolymer with N,N-dimethylaminopropylacrylamide, P(NIPAAm-co-DMAPAAm2%)-FL (LCST: 37.4 °C), can be controlled within only 1 °C near body temperature, which is suitable for biological applications. These results indicated that the cellular uptakes of thermoresponsive polymers could be accurately controlled by the temperature, and such polymers have potential applications in discriminating between normal and pathological cells, and in intracellular drug delivery systems with local hyperthermia.

Preparation of thermoresponsive and pH-sensitivity polymer magnetic hydrogel nanospheres as anticancer drug carriers

In this work, a novel thermo and pH responsive magnetic hydrogel nanosphere poly(N-isopropylacrylamide-co-acrylic acid)/Fe(3)O(4) (poly(NIPAAm-co-AA)/Fe(3)O(4)) has been successfully prepared. The magnetic hydrogel nanospheres with thermo and pH-sensitivity were characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared-spectrometer (FT-IR), UV-vis absorption spectroscopy, and vibrating sample magnetometer (VSM). The magnetic hydrogel nanospheres exhibited uniform sphere structures and superparamagnetic property. Finally, the drug loading capacities and the releasing behavior of the magnetic hydrogel nanospheres were investigated with doxorubicin hydrochloride (DOX) as an anticancer drug model. The resulting magnetic hydrogel nanospheres exhibited high encapsulation efficiency (95%) to DOX under an appropriate condition. In vitro release experiments revealed that release was faster at pH 5.3 (37°C) than at pH 7.4 (25°C) or pH 7.4 (37°C). The DOX-loaded magnetic hydrogel nanospheres also showed enhanced anticancer effect compared with the free drug in vitro. These presented results suggested that the magnetic hydrogel nanospheres have a potential as tumor targeting drug carrier.

Effect of polymer containing a naphthyl-alanine derivative on the separation selectivity for aromatic compounds in temperature-responsive chromatography

A novel polymer-grafted stationary phase of high-performance liquid chromatography (HPLC) was developed, utilizing a temperature-responsive polymer containing an aromatic moiety. Firstly, we synthesized novel functional polymer poly(N-isopropylacrylamide-co-N-acryloyl-3-(2-naphthyl)-L-alanine methyl ester) [poly(NIPAAm-co-Nap)], which has temperature-responsiveness and selective retention of aromatic compounds by an intermolecular π-π interaction. The polymer exhibited a significant reversible phase transition from hydrophilic to hydrophobic in the vicinity of its lower critical solution temperature. Employing the developed polymer-grafted silica column, temperature-responsive chromatography was conducted using water as a sole mobile phase. A comparison with a conventional ODS column or a homogeneous PNIPAAm-grafted silica column showed that the retention of aromatic compounds was dramatically increased on the poly(NIPAAm-co-Nap)-grafted stationary phase. Introducing the naphthyl-alanine derivative caused a significant effect on the retention selectivity for aromatic compounds.

Temperature-responsive chromatography for the separation of biomolecules

Temperature-responsive chromatography for the separation of biomolecules utilizing poly(N-isopropylacrylamide) (PNIPAAm) and its copolymer-modified stationary phase is performed with an aqueous mobile phase without using organic solvent. The surface properties and function of the stationary phase are controlled by external temperature changes without changing the mobile-phase composition. This analytical system is based on nonspecific adsorption by the reversible transition of a hydrophilic-hydrophobic PNIPAAm-grafted surface. The driving force for retention is hydrophobic interaction between the solute molecules and the hydrophobized polymer chains on the stationary phase surface. The separation of the biomolecules, such as nucleotides and proteins was achieved by a dual temperature- and pH-responsive chromatography system. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase, thus the separation system would have potential applications in the separation of biomolecules. Additionally, chromatographic matrices prepared by a surface-initiated atom transfer radical polymerization (ATRP) exhibit a strong interaction with analytes, because the polymerization procedure forms a densely packed polymer, called a polymer brush, on the surfaces. The copolymer brush grafted surfaces prepared by ATRP was an effective tool for separating basic biomolecules by modulating the electrostatic and hydrophobic interactions. Applications of thermally responsive columns for the separations of biomolecules are reviewed here.