Preparation and characterization of porous carbon material-coated solid-phase microextraction metal fibers

Enhancing the water-resistance of MOF-199 film through incorporation of microporous organic networks for solid-phase microextraction of BTEX in aqueous environments with improved efficiency

BACKGROUND

The practical application of moisture sensitive metal organic frameworks (MOFs) in extraction technology faces challenges related to competitive adsorption and water stability. The target analytes cannot be effectively extracted under humid conditions due to the competitive moisture adsorption and/or framework structure collapse of MOFs. In this study, the microporous organic networks (MONs) were synthesized through Sonogashira coupling reaction to use for hydrophobic modification on the surface of MOF-199.

RESULTS

The MOF-199@MON as coating was deposited on stainless steel wires for solid-phase microextraction (SPME) of benzene series (BTEX) in aqueous environments. Under the optimal extraction conditions, the MOF-199@MON coated fiber for SPME coupled with GC-MS for the determination of BTEX gave the linear range of 0.5-500 μg L-1, the limit of detections (LODs, S/N = 3) of 0.01-0.04 μg L-1, the limit of quantifications (LOQs, S/N = 10) of 0.04-0.12 μg L-1, the enhancement factors of 3567-4878, and the intra-day, inter-day and fiber-to-fiber precisions (relative standard deviations, RSDs) of 1.0-9.8, 1.9-7.9 and 4.5-9.5 %, respectively. The developed method was successfully applied to the analysis of BTEX in water samples with the recoveries of 71.0 %-113 %.

SIGNIFICANCE

This work reveals the home-made SPME fibers have a long service life (the extraction efficiency of fiber decreased by only 7.26 %-13.14 % after 100 cycles). The potential of MON functionalized MOFs as effective adsorbents for the SPME of pollutants in the water environment.

A comprehensive review of hydrophobic silica and composite aerogels: synthesis, properties and recent progress towards environmental remediation and biomedical applications

The hydrophobicity of silica and composite aerogels has enabled them to acquire applications in a variety of fields. With remarkable structural, morphological, and physiochemical properties such as high porosity, surface area, chemical stability, and selectivity, these materials have gained much attention of researchers worldwide. Moreover, the hydrophobic conduct has enabled these aerogels to adsorb substances, i.e., organic pollutants, without collapsing the pore and network structure. Hence, considering such phenomenal properties and great adsorption potential, exploiting these materials for environmental and biomedical applications is trending. The present study explores the most recent advances in synthetic approaches and resulting properties of hydrophobic silica and composite aerogels. It presents the various precursors and co-precursors used for hydrophobization and gives a comparative analysis of drying methods. Moreover, as a major focus, the work presents the recent progress where these materials have shown promising results for various environmental remediation and biomedical applications. Finally, the bottlenecks in synthesis and applicability along with future prospects are given in conclusions.

In Situ Synthetic ZIF-8/Carbon Aerogel Composites as Solid-Phase Microextraction Coating for the Detection of Phthalic Acid Esters in Water Samples

In this study, a hybrid composite featuring zeolitic imidazolate framework-8/carbon aerogel (ZIF-8/CA) was synthesized via in situ nucleation and growth of ZIF-8 nanoparticles inside carbon aerogels. The novel material was used as the solid-phase microextraction (SPME) coating for the five phthalic acid esters (PAEs) detection by coupling with a gas chromatography–flame ionization detector (GC-FID). Compared with bare carbon aerogel, the ZIF-8/CA presented the best performance, which is attributed to the unique advantages between the high surface area of CA and high hydrophobic properties, the thermal stability of ZIF-8, and their synergistic adsorption effects, such as molecular penetration, hydrogen bond, and π–π stacking interactions. Under the optimized conditions, the as-proposed ZIF-8/CA fiber provided a wide linearity range from 0.2 to 1000 μg L⁻¹ and a low detection limit of 0.17–0.48 μg L⁻¹ for PAEs analysis. The intra-day and inter-day of signal fiber and the fiber–fiber relative standard deviations were observed in the ranges of 3.50–8.16%, 5.02–10.57%, and 5.66–12.11%, respectively. The method was applied to the determination of five PAEs in plastic bottled and river water samples.

Evaluation of New, Sputtered Carbon SPME Fibers with a Multi-Functional Group Test Mixture

We report the first fabrication of sputtered carbon, solid-phase microextraction (SPME) fibers. These fibers have competitive extraction capabilities compared with the commercial carbon wide range (CWR) SPME fiber. This report also includes a demonstration of a newly developed SPME test mix that includes 15 different compounds with a wide range of functional groups and chemical properties. The fiber fabrication process involves sputtering carbon onto fused silica fibers, and the effects of throw distance on the morphology of the carbon coatings were studied. Four different carbon coating thicknesses were evaluated, with PDMS added as a stationary phase. These fibers were characterized with multiple analytical techniques, including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), water contact angle (WCA) goniometry, as well as headspace (HS) and direct immersion (DI)–SPME–GC–MS. The best (11.5 µm) sputtered carbon SPME fibers, with and without PDMS, were evaluated using the new evaluation mix and compared with the commercial CWR fiber and a previously sputtered/developed silicon fiber. The new probe mix helped elucidate differences among the fibers, which would have been missed by current commercial test mixes. The sputtered carbon SPME fibers showed similar functional group selectivity as commercial CWR fibers. However, the sputtered carbon fibers showed higher responses per volume compared with the commercial CWR fiber, indicating the porous morphology of the sputtered carbon has the ability to overcome large phase thickness/volume discrepancies and increase the relative recovery for various compounds.

Carbon aerogel as a solid-phase microextraction fiber coating for the extraction and detection of trace tetracycline residues in food by coupling with high-performance liquid chromatography

A direct immersion solid-phase microextraction method for determining tetracyclines (TCs) was developed by coupling with high-performance liquid chromatography. A carbon aerogel (CA) was synthesized as a fiber coating with high extractive properties and a low density of 0.1855 g cm-3via ambient pressure drying and carbonization. The as-synthesized CA exhibited a high specific surface area and a cross-linked structure; it was characterized via scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and Brunauer-Emmett-Teller analysis, etc. The extraction performance for six TCs was investigated, and the main experimental parameters were optimized by the Box-Behnken design. Adsorption kinetics, Langmuir and Freundlich models were used to clarify the extraction mechanism. This method showed wide linear ranges of 1-500 μg L-1, low limits of detection of 0.52-1.05 μg L-1, good repeatability of 1.37-12.47%, and satisfactory inter-fiber reproducibility of 8.51-15.81% relative standard deviation for the detection of six TCs. Moreover, this study provided an interesting insight into the detection of TCs residues in food samples.

Carbon aerogel-based solid-phase microextraction coating for the analysis of organophosphorus pesticides

The current study is focused on the in situ synthesis of a carbon aerogel (CA)-based solid-phase microextraction (SPME) fiber coating on stainless steel wire and evaluation of the suitability of CAs as SPME coating materials for the analysis of selected organophosphorus pesticides (OPPs) contained in environmental samples. A CA-based coating was obtained by pyrolyzing organic aerogels, which were prepared by the sol-gel polymerization of formaldehyde and 5-methylresorcinol, an oil shale processing by-product. The results demonstrated, for the first time, the in situ synthesis of a CA-based SPME fiber coating on stainless steel wire and its suitability for the extraction and preconcentration of six OPPs. Main parameters affecting the extraction efficiency were investigated and optimized. The direct immersion (DI)-SPME procedure combined with gas chromatography-mass spectrometry (GC-MS) for the simultaneous analysis of selected OPPs was successfully applied to the efficient and sensitive determination of analytes of interest in environmental matrices of honey and natural water samples. The developed CA-coated SPME fiber showed good linearity (R² = 0.981-0.994), low detection limits (0.11-0.83 μg L^-1) and satisfactory single fiber and fiber-to-fiber reproducibilities (8.8-12.3%, n = 5 and 11.4-17.2%, n = 3). The performance of the CA-coating was compared with that of commercially available SPME fiber coatings.

Boosting loading capacities of shapeable metal–organic framework coatings by closing the interparticle spaces of stacked nanocrystals

Herein, an intriguing strategy is presented for preparing monolithic metal–organic framework coatings through compactly filling up the interparticle spaces in the stacked architectures of nanocrystals.

Determination of four salicylic acids in aloe by in vivo solid phase microextraction coupling with liquid chromatography-photodiode array detection

In recent years, great concerns have been raised about salicylic acid (SA) and its derivatives as plant regulators. Therefore, precise determination of the distribution of SAs in the living plants is necessary for not only fundamental researches but also the regulating mechanisms. In this study, a custom-made solid phase microextraction (SPME) fiber based on diallyl dimethyl ammonium chloride-assembled graphene oxide-coated C18 composite (C18@GO@PDDA) was proposed for in vivo detection of salicylic acid, acetylsalicylic acid (ASA), 4-methyl salicylic acid（4-SA）and 3-methyl salicylic acid (3-SA) in aloe plants. Under the optimized conditions, the analytical performance evaluated in homogenized aloe plant tissues exhibited low detection limits (1.8-2.8 μg g^-1), wide linear ranges (10-5000 μg g^-1), and satisfactory reproducibility (relative standard deviations less than 8.4% and 9.3% for inter-fiber and intra-fiber assays, respectively). Under cadmium stress, the developed method was applied for the in vivo tracing of four salicylic acids in aloe plants. A 48-h in vivo tracing revealed that salicylic acids were involved in the pathway of cadmium stress tolerance. To our best knowledge, it is the first effort to realize the in vivo analysis of SA and its derivatives in plants, and it has a made a great step forward in the area of plant hormone analysis.

Porous silver coating fiber for rapidly screening organotin compounds by solid phase microextraction coupled with surface enhanced Raman spectroscopy

Rapidly screening organotin by solid phase microextraction coupled with surface enhanced Raman spectroscopy.

Development of a carbon-nanoparticle-coated stirrer for stir bar sorptive extraction by a simple carbon deposition in flame

Stir bar sorptive extraction is an environmentally friendly microextraction technique based on a stir bar with various sorbents. A commercial stirrer is a good support, but it has not been used in stir bar sorptive extraction due to difficult modification. A stirrer was modified with carbon nanoparticles by a simple carbon deposition process in flame and characterized by scanning electron microscopy and energy-dispersive X-ray spectrometry. A three-dimensional porous coating was formed with carbon nanoparticles. In combination with high-performance liquid chromatography, the stir bar was evaluated using five polycyclic aromatic hydrocarbons as model analytes. Conditions including extraction time and temperature, ionic strength, and desorption solvent were investigated by a factor-by-factor optimization method. The established method exhibited good linearity (0.01-10 μg/L) and low limits of quantification (0.01 μg/L). It was applied to detect model analytes in environmental water samples. No analyte was detected in river water, and five analytes were quantified in rain water. The recoveries of five analytes in two samples with spiked at 2 μg/L were in the range of 92.2-106% and 93.4-108%, respectively. The results indicated that the carbon nanoparticle-coated stirrer was an efficient stir bar for extraction analysis of some polycyclic aromatic hydrocarbons.

A nanoporous carbon material derived from pomelo peels as a fiber coating for solid-phase microextraction

A novel nanoporous carbon derived from a biomass source was prepared and used as an SPME fiber coating.

Environmentally Friendly Method: Development and Application to Carbon Aerogel as Sorbent for Solid-Phase Extraction

We developed two simple, fast, and environmentally friendly methods using carbon aerogel (CA) and magnetic CA (mCA) materials as sorbents for micro-solid-phase extraction (μ-SPE) and magnetic solid-phase extraction (MSPE) techniques. The material performances such as adsorption isotherm, adsorption kinetics, and specific surface area were discussed by N2 adsorption-desorption isotherm measurements, ultraviolet and visible (UV-vis) spectrophotometry, scanning electron microscopy (SEM), and high resolution transmission electron microscopy (HR-TEM). The experimental results proved that the heterogeneities of CA and mCA were well modeled with the Freundlich isotherm model, and the sorption process well followed the pseudo-second-order rate equation. Moreover, plant growth regulators (PGRs) such as kinetin (6-KT), 6-benzylaminopurine (6-BA), 2,4-dichlorophenoxyacetic acid (2,4-D), and uniconazole (UN) in a reservoir raw water sample were selected as the evaluation of applicability for the proposed μ-SPE and MSPE techniques using high performance liquid chromatography (HPLC). The experimental conditions of two methods such as the amount of sorbent, extraction time, pH, salt concentration, and desorption conditions were studied. Under the optimized conditions, two extraction methods provided high recoveries (89-103%), low the limits of detection (LODs) (0.01-0.2 μg L(-1)), and satisfactory analytical features in terms of precision (relative standard deviation, RSD, 1.7-5.1%, n=3). This work demonstrates the feasibility and the potential of CA and mCA materials as sorbents for μ-SPE and MSPE techniques. Besides, it also could serve as a basis for future development of other functional CAs in pretreatment technology and make them valuable for analysis of pollutants in environmental applications.

Graphene coating bonded onto stainless steel wire as a solid-phase microextraction fiber

A graphene coating bonded onto stainless steel wire was fabricated and investigated as a solid-phase microextraction fiber. The coating was characterized by scanning electron microscopy and energy-dispersive X-ray spectrometer. The coating with rough and crinkled structure was about 1 μm. These characteristics were helpful for promoting extraction. Using five n-alkanes (n-undecane, n-dodecane, n-tridecane, n-tetradecane and n-hexadecane) as analytes, the fiber was evaluated in direct-immersion mode by coupling with gas chromatography (GC). Through optimizing extraction and desorption conditions, a sensitive SPME-GC analytical method was established. SPME-GC method provided wide linearity range (0.2-150 μg L(-1)) and low limits of determination (0.05-0.5 μg L(-1)). It was applied to analyze rain water and a soil sample, and analytes were quantified in the range of 0.85-1.96 μg L(-1) and 0.09-3.34 μg g(-1), respectively. The recoveries of samples spiked at 10 μg L(-1) were in the range of 90.1-120% and 80.6-94.2%, respectively. The fiber also exhibited high thermal and chemical stability, due to the covalent bonds between graphene coating and wire, and the natural resistance of graphene for thermal, acid and basic conditions.

A novel microextractor stick (polyaniline/zinc film/stainless steel) for polycyclic aromatic hydrocarbons in water

A novel microextractor stick (MES) has been developed for the determination of trace amounts of polycyclic aromatic hydrocarbons (PAHs) in water samples. The proposed MES was prepared by electrodepositing a Zn-film onto a stainless steel stick followed by a coating with polyaniline (PANI) sorptive layers. This PANI/Zn-film/stainless steel stick produced a large surface area, provided a high extraction efficiency (82.0 ± 6.2% to 111.0 ± 7.5% recovery) of spiked chrysene (Chry) and benzo(a)pyrene (BaP). This MES is cost-effective, easy to prepare, robust and provides a good stick-to-stick reproducibility (n = 10) with a relative standard deviation of less than 10%. The effect of various parameters on the efficiency of extraction of PAHs were optimized, including the extraction time, extraction and desorption stirring speeds, volume of desorption solvent and desorption time. Under the optimum conditions, the limit of detection (S/N ≥ 3) and limit of quantification (S/N ≥ 10) of both Chry and BaP were 0.05 and 0.12 μg L(-1), respectively. The developed MES was successfully applied to determine PAHs in real water samples.