Comparison of different sample treatments for the analysis of quinolones in milk by capillary-liquid chromatography with laser induced fluorescence detection

Miniaturized liquid chromatography applied to the analysis of residues and contaminants in food: A review

The humankind is pretty dependent on food to control several biological processes into the organism. As the world population increases, the demand for foodstuffs follows the same trend claiming for a high food production situation. For this reason, a substantial amount of chemicals is used in agriculture and livestock husbandries every year, enhancing the likelihood of contaminated foodstuffs being commercialized. This outlook becomes a public health concern; thus, the governmental regulatory agencies impose laws to control the residues and contaminants in food matrices. Currently, one of the most important analytical techniques to perform it is LC. Despite its already recognized effectiveness, it is often time consuming and requires significant volumes of reagents, which are transformed into toxic waste. In this context, miniaturized LC modes emerge as a greener and more effective analytical technique. They have remarkable advantages, including higher sensitivity, lower sample amount, solvent and stationary phase requirements, and more natural coupling to MS. In this review, most of the critical characteristics of them are discussed, focusing on the benchtop instruments and their related analytical columns. Additionally, a discussion regarding the last 10 years of publications reporting miniaturized LC application for the analysis of natural and industrial food samples is categorized. The main chemical classes as applied in the crops are highlighted, including pesticides, veterinary drugs, and mycotoxins.

Development of a QuEChERS method for simultaneous analysis of antibiotics in carcasses for supplementary feeding of endangered vultures

Antibiotics have been beneficial for human and animal health. However, an excessive use in livestock and a deficient management of the carcasses can lead to adverse effects in the scavengers that ingest them, especially in "supplementary feeding sites" (SFS). The aim of this study was to assess the potential risk of exposure to antibiotics for an endangered population of Cinereous vultures (Aegypius monachus) from southeastern Portugal. Hence, a multi-residue method based on QuEChERs was adapted and validated to analyse, in small volumes of tissues, the most frequent antibiotics used in livestock. The method was applied to 87 samples of liver, muscle and kidney from 7 goats and 25 sheep disposed in SFS. According to questionnaires to farmers, the animals had not been treated with antibiotics, but analyses showed residues in 29% of the samples. Antibiotics were more frequent in goats (42.9%) than in sheep (24.2%), and oxytetracycline and trimethoprim were the most common (both 13.8%). Oxytetracycline, the most common antibiotic for livestock in Portugal, showed the highest concentration (1452.68 ng g^-1). To our knowledge, this is the first study of presence of antibiotics in carrion from SFS. The concentrations of antibiotics in carrion do not seem to pose a risk of acute intoxication for adult Cinereous vultures. However, subtle and likely chronic exposure with unknown health consequences may occur, which requires more research. Moreover, the results of this first study can be used in future studies to assess the risk for avian scavengers.

Use of phenyl/tetrazolyl-functionalized magnetic microspheres and stable isotope labeled internal standards for significant reduction of matrix effect in determination of nine fluoroquinolones by liquid chromatography-quadrupole linear ion trap mass spectrometry

In this study, the strategy of unique adsorbent combined with isotope labeled internal standards was used to significantly reduce the matrix effect for the enrichment and analysis of nine fluoroquinolones in a complex sample by liquid chromatography coupled to quadrupole linear ion trap mass spectrometry (LC-QqQ_LIT-MS/MS). The adsorbent was prepared conveniently by functionalizing Fe₃O₄@SiO₂ microspheres with phenyl and tetrazolyl groups, which could adsorb fluoroquinolones selectively via hydrophobic, electrostatic, and π-π interactions. The established magnetic solid-phase extraction (MSPE) method as well as using stable isotope labeled internal standards in the next MS/MS detection was able to reduce the matrix effect significantly. In the process of LC-QqQ_LIT-MS/MS analysis, the precursor and product ions of the analytes were monitored quantitatively and qualitatively on a QTrap system equipped simultaneously with the multiple reaction monitoring (MRM) and enhanced product ion (EPI) scan. Subsequently, the enrichment method combined with LC-QqQ_LIT-MS/MS demonstrated good analytical features in terms of linearity (7.5-100.0 ng mL^-1, r > 0.9960), satisfactory recoveries (88.6%-118.3%) with RSDs < 12.0%, LODs = 0.5 μg kg^-1 and LOQs = 1.5 μg kg^-1 for all tested analytes. Finally, the developed MSPE-LC-QqQ_LIT-MS/MS method had been successfully applied to real pork samples for food-safety risk monitoring in Ningxia Province, China. Graphical abstract Mechanism of reducing matrix effect through the as-prepared adsorbent.

Metabolic profile modifications in milk after enrofloxacin administration studied by liquid chromatography coupled with high resolution mass spectrometry

High resolution accurate mass spectrometry (HRMS) operating in full scan MS mode was used in the search and identification of metabolites in raw milk from cows medicated with enrofloxacin. Data consisting of m/z features were taken throughout the entire chromatogram of milk samples from medicated animals and were compared with blank samples. Twenty six different compounds were identified. Some of them were attributed to structures related to enrofloxacin while others were dipeptides or tripeptides. Additionally, enrofloxacin was administered in a controlled treatment for three days. Milk was collected daily from the first day of treatment and until four days after in the search for the identified compounds. The obtained data were chemometrically treated by Principal Component Analysis. Samples were classified by this method into three different groups corresponding to days 1-2, day 3 and days 4-7 considering the different concentration profile evolution of metabolites during the days studied. Tentative metabolic pathways were designed to rationalize the presence of the newly identified compounds.

QuEChERS method for the simultaneous quantification of phorate and its metabolites in porcine and chicken muscle and table eggs using ultra-high performance liquid chromatography with tandem mass spectrometry

An analytical method to detect phorate and its metabolites, including phorate sulfone, phorate sulfoxide, phoratoxon, phoratoxon sulfone, and phoratoxon sulfoxide, in porcine and chicken muscles and table eggs was developed and validated. Extraction was performed using a quick, easy, cheap, effective, rugged, and safe method and analysis was conducted using ultra-high performance liquid chromatography-tandem mass spectrometry. Matrix-matched calibrations were linear over the tested concentrations, with determination coefficient ≥ 0.995 for all tested analytes in the different matrices. The limits of detection and quantification were 0.001 and 0.004 mg/kg, respectively. The calculated recovery rates at three fortification levels were satisfactory, with values between 74.22 and 119.89% and relative standard deviations < 10%. The method was applied successfully to commercial samples collected from locations throughout the Korean Peninsula, and none of them showed any traces of the tested analytes. Overall, the developed method is simple and versatile, and can be used for monitoring phorate and its metabolites in animal products rich in protein and fat.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Application of molecularly imprinted polymers in food analysis: clean-up and chromatographic improvements

Several natural and synthetic substances have been monitored in analytical laboratories worldwide to ensure food safety. Multiple residue detection (i.e., detection of multiple analytes in a single sample or matrix) is a main weakness of existing analytical methods, when fast and reliable results are required. Multianalyte approaches may save time and money in the food industry, and more importantly, they allow the quick release of food products into the marketplace. In addition, multianalyte approaches notably decrease the time required between sampling and analysis to meet legal requirements. However, to achieve analytical success, it is necessary to develop thorough clean-up procedures to extract analytes from the matrix. In addition, good chromatographic separation methods are also necessary to distinguish closely related analytes. Molecular imprinting technology (MIT) is an emerging, powerful tool for sample extraction and chromatography. First used for solid-phase extraction, molecularly imprinted polymers (MIPs) are also effective chromatographic phases for the separation of isomers and structurally related molecules. In recent years, a number of analytical methods utilising MIT have been applied for the analysis of residues in food, and existing methodologies have been improved. This review article describes the latest applications of MIT in the development of methodologies to monitor the presence of residues of veterinary products in foodstuff.

Direct fluorimetric sensing of UV-excited analytes in biological and environmental samples using molecularly imprinted polymer nanoparticles and fluorescence polarization

A rapid, robust, sensitive and economic sensing method, based on a molecularly imprinted polymer (MIP) synthetic antibody mimic, and fluorescence polarization analysis, for the direct detection of UV-excited fluorescent analytes in food and environmental samples was developed. Fluoroquinolone (FQ) antibiotics were used as fluorescent model analytes. Water-compatible MIP nanoparticles were synthesized with enrofloxacin (ENRO) as the imprinting template. Fluorescence polarization measurements then allow the direct determination of the amount of ENRO and other structurally related piperazine-based fluoroquinolones that bind to the MIP. No separation step was required since this technique distinguishes in situ analyte molecules bound to the MIP from the free analyte in solution. This assay was successfully applied for the first time to determine FQs in real samples, i.e. tap water and milk, without any prior concentration step, by simply adding a known amount of MIP. No interference by the sample components was observed even though the excitation was in the UV region. In tap water, a low limit of detection of 0.1 nM for ENRO was achieved with 5 μg mL(-1) of MIP. In milk, ENRO and danofloxacin, whose MRLs have been fixed at 0.28 μM and 0.08 μM, respectively, could be selectively measured and distinguished from other families of antibiotics. The procedure is very easy and practical as it consists of simply precipitating the milk proteins with acetonitrile and adding buffer and MIP to the supernatant before reading the polarization values with a spectrofluorimeter.