Water stability of zeolite imidazolate framework 8 and application to porous membrane-protected micro-solid-phase extraction of polycyclic aromatic hydrocarbons from environmental water samples

Micro assembly strategies for enhancing solid-state emission of cellulose nanocrystals and application in photoluminescent inks

Crystalline cellulose exhibits photoluminescent properties, making it ideal for solid-state emission through properly assembling crystal arrays. However, assembling in water or other polar solvents poses structural integrity issues. To address this, a micro-assembly method is proposed. Cellulose nanocrystals (CNCs) are organized within a sub-micrometer-sized ZIF-8 metal-organic framework and coated with TiO2. Notably, the assembly within ZIF-8 improves the CNCs' emission quantum yield to 37.8 %. The bonding between ZIF-8 and CNCs relies on electrostatic interactions and hydrogen bonds, which are sensitive to polar solvents. Yet, the sturdy coordination bonds between TiO2 and ZIF-8 enhance resistance. Solvent-resistance tests confirm that TiO2 prevents CNC assembly breakdown, resulting in only an 8.0 % drop in photoluminescent intensity in an alkaline solution after 24 h, compared to 33 % without the coating. For anti-counterfeiting purposes, TiO2@ZIF-8@CNC is combined with a polymer matrix, allowing information to be revealed under specific wavelengths using screen-printed labels.

Metal-organic frameworks for food contaminant adsorption and detection

Metal-organic framework materials (MOFs) have been widely used in food contamination adsorption and detection due to their large specific surface area, specific pore structure and flexible post-modification. MOFs with specific pore size can be targeted for selective adsorption of some contaminants and can be used as pretreatment and pre-concentration steps to purify samples and enrich target analytes for food contamination detection to improve the detection efficiency. In addition, MOFs, as a new functional material, play an important role in developing new rapid detection methods that are simple, portable, inexpensive and with high sensitivity and accuracy. The aim of this paper is to summarize the latest and insightful research results on MOFs for the adsorption and detection of food contaminants. By summarizing Zn-based, Cu-based and Zr-based MOFs with low cost, easily available raw materials and convenient synthesis conditions, we describe their principles and discuss their applications in chemical and biological contaminant adsorption and sensing detection in terms of stability, adsorption capacity and sensitivity. Finally, we present the limitations and challenges of MOFs in food detection, hoping to provide some ideas for future development.

Trends in Innovations and Recent Advances in Membrane Protected Extraction Techniques for Organics in Complex Samples

Membrane protected extraction is an ongoing innovation for isolation and pre-concentration of analytes from complex samples. The extraction process, clean-up and pre-concentration of analytes occur in a single step. The inclusion of solid sorbents such as molecularly imprinted polymers (MIPs) after membrane extraction ensures that selective double extraction occurs in a single step. The first step involves selective extraction using the membrane and diffused analytes are trapped on the solid sorbent enclosed in the membrane. No further clean-up is required even for very dirty samples like plant extracts and wastewaters samples. Sample clean-up occurs during extraction in the first process and not as additional step since matrix components are prevented from trapping on the sorbent. This can be referred to as prevention is better than cure approach. In this work, the analytical methods that employed membrane protected extraction for various organics such as pesticides, polycyclic aromatic hydrocarbons, and pharmaceuticals are reviewed. The designs of these analytical methods, their applications, advantages and drawbacks are discussed in this review. Literature suggests that the introduction of solid sorbents in membrane creates the much-needed synergy in selectivity. Previous reviews focused on membrane combinations with MIPs while discussing micro-solid-phase extraction. The scope of this review was broadened to include other sample preparation aspects such as membrane protected stir bar solvent extraction and membrane protected solid-phase microextraction. In addition, novel sample preparation methods for solid samples which include Soxhlet membrane protected molecular imprinted solid phase extraction and membrane protected ultra sound assisted extracted are discussed.

Evaluation of three sorbent-phase extraction techniques based on hyper-crosslinked polymer for the extraction of five endocrine disrupters in water

A series of low-cost hyper-crosslinked polymers were prepared by an easy one-step Friedel-Crafts reaction. The synthesized hyper-crosslinked polymers exhibited remarkably porous structure, large surface area, and hydroxyl groups, which can be employed as an ideal adsorbent material for novel sorbent-phase extraction techniques. Based on this, using hyper-crosslinked polymers as sorbent and coating, three novel extraction methods, including micro-solid-phase extraction, dispersive solid-phase extraction, and solid-phase microextraction, were explored and evaluated for simultaneous measurement of five endocrine-disrupting compounds (triclosan and bisphenol A, tetrabromobisphenol A, tetrabromobisphenol A bisallylether, and tetrabromobisphenol A bis(2,3-dibromopropyl ether)) in environment water prior to high-performance liquid chromatography-ultraviolet. The influence of experimental parameters on three extraction techniques such as extraction time, the amount of hyper-crosslinked polymers, extraction temperature, ionic strength, and desorption conditions were optimized. Three previously mentioned methods provided limits of detection ranging from 0.01 to 0.05 μg/L, and high recoveries (85-99%) with relative standard deviations of 1.7-5.6%. This study presented the merits and disadvantages of three proposed extraction methods and their potential for effective monitoring of hazardous pollutants in real water samples.

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

Preparation of magnetic zeolitic imidazolate framework-8 for magnetic solid-phase extraction of strobilurin fungicides from environmental water samples

In this paper, magnetic zeolitic imidazolate framework-8 composites were synthesized by a simple in situ method and then used for the first time as an adsorbent in magnetic solid-phase extraction for extracting multiple strobilurin fungicides. The magnetic composites were characterized in detail. The results showed that Fe₃O₄ nanoparticles were attached on the surface of zeolitic imidazolate framework-8 with a uniform particle size of 150-200 nm and that the magnetic composites possessed a perfect molecular transfer rate towards strobilurin fungicides. The parameters of the magnetic solid-phase extraction process, including solution pH, adsorption time, solution volume, elution solvent, and elution volume, were investigated. Under the optimum conditions, the recoveries of all five fungicides fell within the range 80.8-109.0% with spiking levels of 10, 20 and 50 ng mL^-1. A magnetic solid-phase extraction-high performance liquid chromatography-tandem mass spectrometry method based on the magnetic composites was established and confirmed to be simple, time-efficient and highly sensitive.

Metal-Organic Frameworks in Bioanalysis: Extraction of Small Organic Molecules

The quantitative determination of xenobiotic compounds, as well as biotics in biological matrices, is generally described with the term bioanalysis. Due to the complexity of biofluids, in combination with the low concentration of the small molecules, their determination in biological matrices is a challenging procedure. Apart from the conventional solid-phase extraction, liquid-liquid extraction, protein precipitation, and direct injection approaches, nowadays, a plethora of microextraction and miniaturized extraction techniques have been reported. Furthermore, the development and evaluation of novel extraction adsorbents for sample preparation has become a popular research field. Metal-organic frameworks (MOFs) are novel materials composed of metal ions or clusters in coordination with organic linkers. Unequivocally, MOFs are gaining more and more attention in analytical chemistry due to their superior properties, including high surface area and tunability of pore size and functionality. This review discusses the utilization of MOFs in the sample preparation of biological samples for the green extraction of small organic molecules. Their common preparation and characterization strategies are discussed, while emphasis is given to their applications for green sample preparation.

Zeolitic imidazolate frameworks in analytical sample preparation

Zeolitic imidazolate frameworks are a class of metal-organic frameworks that are topologically isomorphic with zeolites. Zeolitic imidazolate frameworks are composed of tetrahedrally coordinated metal ions connected by imidazolate linkers and have a high porosity and chemical stability. Here, we summarize the progress made in the application of zeolitic imidazolate frameworks in sample preparation for analytical purposes. This review is focused on analytical methods based on liquid chromatography, gas chromatography, or capillary electrophoresis, where the use of zeolitic imidazolate frameworks has contributed to increasing the sensitivity and selectivity of the method. While bulk zeolitic imidazolate frameworks have been directly used in analytical sample preparation protocols, a variety of strategies for their magnetization or their incorporation into sorbent particles, monoliths, fibers, stir bars, or thin films, have been developed. These modifications have facilitated the handling and application of zeolitic imidazolate frameworks for a number of analytical sample treatments including magnetic solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, or thin film microextraction, among other techniques.

Enhancing enrichment ability of ZIF-8 mixed matrix membrane microextraction by reverse micelle strategy for analysis of multiple ionizable bioactive components in biological samples

Recent research aimed at the design of mixed-matrix membrane (MMM) to be used for microextraction emphasized on membrane extraction phase with high surface area and porosity. This study explored the influence that surfactants have on MMM extraction efficiency for the first time. The zeolitic imidazolate framework 8-based MMM (ZIF-8-MMM) was synthesized by in situ self-assembly of ZIF-8 on the inner wall of a hollow fiber membrane with the aim of fabricating a microextraction device. By prompting the encapsulation of ionizable analytes in the polar core of reverse micelles, the presence of surfactants in extraction solvent assisted the dissolution of analytes in the fiber membrane lumen and enhanced their adsorption onto ZIF-8. Notably, hereby a microextraction method based on the novel ZIF-8-MMM-reverse micelle (ZIF-8-MMM-RM) system was developed and employed for the extraction and quantitation of two alkaloids (berberine and jatrorrhizine) and two flavonoids (wogonin and wogonoside) in biological samples. The main factors affecting microextraction performance, identity of the extraction solvent, surfactant concentration, sample solution pH and extraction time, were investigated in detail. The method showed good linearity (r² > 0.99) and repeatability (RSD < 10%), low limits of detection (0.10-0.31 ng mL^-1) and high relative recoveries (90.03-98.84%). The enrichment factor values ranged between 48.47 and 54.96. Reverse micelle formation prompted by surfactant addition was demonstrated to effectively assist the extraction of multiple ionizable analytes from biological samples, resulting in a marked improvement of ZIF-8-MMM extraction performance.

Selective Adsorption of Cationic Dyes for Stable Metal-Organic Framework ZJU-48

A cationic metal-organic framework (MOF) ZJU-48 with one-dimensional pores of about 9.1 × 9.1 Ų has been prepared from zinc ions, adenine, and carboxyl ligands. ZJU-48 displays excellent water stability for about one week, exhibiting its potential application for adsorption and separation of dyes. Cationic and anionic dyes with similar sizes are adopted to study the adsorbing and separating properties of ZJU-48. Cationic dyes are adsorbed better than anionic dyes because of the negatively charged zeta potential of the material surface, implying its selective adsorption to cationic dyes, and it is charge-based adsorption. Meanwhile, the adsorption ability of the MOF to cationic dyes with different sizes is also investigated. We find that the adsorbed amount decreases with increase in the size of organics ,indicating that it is size-based adsorption. Furthermore, the cationic dye methylene blue (MB) is employed and focused on for its suitable charge and fitting size to evaluate the maximum adsorption capacity and desorption progress of ZJU-48. The results show that the maximum loaded amount of MOF toward MB reaches 582.44 mg/g, and about 90% of loaded dyes can be released from frameworks in N,N-dimethylformamide with NaCl over 6 h, exhibiting satisfactory adsorptive property and possibility as a reusable adsorbent.

Recent Advances in the Extraction of Polycyclic Aromatic Hydrocarbons from Environmental Samples

Polycyclic aromatic hydrocarbons (PAHs) comprise a group of chemical compounds consisting of two or more fused benzene rings. PAHs exhibit hydrophobicity and low water solubility, while some of their members are toxic substances resistant to degradation. Due to their low levels in environmental matrices, a preconcentration step is usually required for their determination. Nowadays, there is a wide variety of sample preparation techniques, including micro-extraction techniques (e.g., solid-phase microextraction and liquid phase microextraction) and miniaturized extraction techniques (e.g., dispersive solid-phase extraction, magnetic solid-phase extraction, stir bar sorptive extraction, fabric phase sorptive extraction etc.). Compared to the conventional sample preparation techniques, these novel techniques show some benefits, including reduced organic solvent consumption, while they are time and cost efficient. A plethora of adsorbents, such as metal-organic frameworks, carbon-based materials and molecularly imprinted polymers, have been successfully coupled with a wide variety of extraction techniques. This review focuses on the recent advances in the extraction techniques of PAHs from environmental matrices, utilizing novel sample preparation approaches and adsorbents.

Critical review of micro-extraction techniques used in the determination of polycyclic aromatic hydrocarbons in biological, environmental and food samples

Polycyclic Aromatic Hydrocarbons (PAHs) are ubiquitous environmental contaminants and their accurate determination is very important to human health and environment safety. In this review, sorptive-based micro-extraction techniques [such as Solid-Phase Micro-extraction (SPME), Stir Bar Sorptive Extraction (SBSE), Micro-extraction in Packed Sorbent (MEPS)] and solvent-based micro-extraction [Membrane-Mediated Liquid-Phase Micro-extraction (MM-LPME), Dispersive Liquid-Liquid Micro-extraction (DLLME), and Single Drop Micro-extraction (SDME)] developed for quantification of PAHs in environmental, biological and food samples are reviewed. Moreover, recent micro-extraction techniques that have been coupled with other sample extraction strategies are also briefly discussed. The main objectives of these micro-extraction techniques are to perform extraction, pre-concentration and clean up together as one step, and the reduction of the analysis time, cost and solvent following the green chemistry guidelines.

Fluorescence Enhancement Method for Enrofloxacin Extraction by Core–Shell Magnetic Microspheres

In this work, we present novel kinds of γ-Fe2O3@SiO2-NH2-CMC/MOF5 and γ-Fe2O3@SiO2-NH2-CMC/IRMOF3 magnetic metal–organic framework (MOF) nanoparticles which possess both magnetic characteristics and fluorescent properties. Here, [Zn4O(bdc)3] (MOF-5, bdc=1,4-benzenedicarboxylate) is a kind of shell. IRMOF3, a known MOF with a cubic topology prepared from Zn(NO3)2⋅4H2O and 2-amino-1,4-benzene dicarboxylic acid, is another kind of shell which is attractive due to its highly porous, crystalline structure and the presence of non-coordinating amino groups on the benzenedicarboxylate (bdc) linker, which are amenable to post-synthetic modification. γ-Fe2O3@SiO2-NH2-CMC magnetic nanoparticles (MNPs) could be prepared by covalent modification of sodium carboxymethyl cellulose (CMC). The structure of γ-Fe2O3 nanoparticles could be determined by X-ray powder diffraction (XRD). X-ray photoelectron spectroscopy (XPS) spectra could be used for the characterisation of γ-Fe2O3@SiO2-NH2, γ-Fe2O3@SiO2-NH2-CMC, γ-Fe2O3@SiO2-NH2-CMC/MOF5, and γ-Fe2O3@SiO2-NH2-CMC/IRMOF3 nanoparticles. Magnetic solid-phase extraction (MSPE) of enrofloxacin (Enr) experiments exhibited that, for γ-Fe2O3@SiO2-NH2-CMC/IRMOF3, the best effects of adsorption could be obtained at pH 4 and 6, while elution conditions of 0.1mol L−1 NaOH and 1% sodium dodecyl sulfate could achieve the best elution effect. The addition of Tb3+ ions could sensitise the fluorescence of Enr. At the same time, via the addition of Tb3+ ions, coordination could occur between nanoparticles and Tb3+ ions, which could be verified by XPS.

Extraction of Metal Ions with Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are crystalline porous materials composed of metal ions or clusters coordinated with organic linkers. Due to their extraordinary properties such as high porosity with homogeneous and tunable in size pores/cages, as well as high thermal and chemical stability, MOFs have gained attention in diverse analytical applications. MOFs have been coupled with a wide variety of extraction techniques including solid-phase extraction (SPE), dispersive solid-phase extraction (d-SPE), and magnetic solid-phase extraction (MSPE) for the extraction and preconcentration of metal ions from complex matrices. The low concentration levels of metal ions in real samples including food samples, environmental samples, and biological samples, as well as the increased number of potentially interfering ions, make the determination of trace levels of metal ions still challenging. A wide variety of MOF materials have been employed for the extraction of metals from sample matrices prior to their determination with spectrometric techniques.

Materials for Solid-Phase Extraction of Organic Compounds

This review provides an overview of the most recent developments involving materials for solid-phase extraction applied to determine organic contaminants. It mainly concerns polymer-based sorbents that include high-capacity, as well as selective sorbents, inorganic-based sorbents that include those prepared using sol-gel technology along with structured porous materials based on inorganic species, and carbon nanomaterials, such as graphene and carbon nanotubes. Different types of magnetic nanoparticles coated with these materials are also reviewed. Such materials, together with their main morphological and chemical features, are described, as are some representative examples of their application as solid-phase extraction materials to extract organic compounds from different types of samples, including environmental water, biological fluids, and food.

Novel sample preparation approaches in gas chromatographic analysis: Promising ideas

The development of sample preparation procedures is still a dynamic process despite a number of already proposed techniques. The main challenge in this research field is to fully replace classical procedures like liquid-liquid extraction and solid-phase extraction in gas chromatographic analysis. Some progress has been already achieved for the last 20 years when miniaturized techniques were incorporated in ISO standards. The current review is focused on novel approaches in sample treatment that appeared since 2010. It includes research studies describing non-conventional instrumental design available to inspire future progress in the field. A combination of a few extraction principles and supporting with additional treatment are the main core suggested for improvement of sample preparation efficiency. This requires good compatibility of extraction media, assessment of multiple experimental parameters, and potential automatization possibilities.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

Fabrication and characterization of zeolitic imidazolate framework-embedded cellulose acetate membranes for osmotically driven membrane process

Zeolitic imidazolate framework-302 (ZIF-302)-embedded cellulose acetate (CA) membranes for osmotic driven membrane process (ODMPs) were fabricated using the phase inversion method. We investigated the effects of different fractions of ZIF-302 in the CA membrane to understand their influence on ODMPs performance. Osmotic water transport was evaluated using different draw solution concentrations to investigate the effects of ZIF-302 contents on the performance parameters. CA/ZIF-302 membranes showed fouling resistance to sodium alginate by a decreased water flux decline and increased recovery ratio in the pressure retarded osmosis (PRO) mode. Results show that the hydrothermally stable ZIF-302-embedded CA/ZIF-302 composite membrane is expected to be durable in water and alginate-fouling conditions.

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

Determination of Enantiomeric Excess by Solid-Phase Extraction Using a Chiral Metal-Organic Framework as Sorbent

Metal-organic frameworks (MOFs) have recently attracted considerable attention because of their fascinating structures and intriguing potential applications in diverse areas. In this study, we developed a novel method for determination of enantiomeric excess (ee) of (±)-1,1′-bi-2-naphthol by solid-phase extraction (SPE) using a chiral MOF, [Co(l-tyr)]_n(l-tyrCo), as sorbent. After optimization of the experimental conditions, a good linear relationship between the ee and the absorbance of the eluate (R² = 0.9984) was obtained and the standard curve was established at the concentration of 3 mmol L⁻¹. The ee values of (±)-1,1′-bi-2-naphthol samples can be rapidly calculated using the standard curve after determination of the absorbance of the eluate. The method showed good accuracy, with an average error of 2.26%, and is promising for ee analysis.

Immobilization of zeolitic imidazolate frameworks with assist of electrodeposited zinc oxide layer and application in online solid-phase microextraction of Sudan dyes

Herein a facile method for immobilization of zeolitic imidazolate frameworks (ZIFs) was developed. The ZIFs grew on electrochemically deposited zinc oxide (ZnO) layer while carbon fiber bundle served as substrate. The synthesized ZIFs-ZnO composite was packed into PEEK tube as sorbent for online solid phase microextraction (SPME)-HPLC-UV analysis of Sudan dyes. Good enrichment efficiency (200-461 fold), low limits of detection (0.002 ng mL^-1) and wide linear ranges (0.02-20 ng mL^-1, correlation coefficient > 0.9996) were achieved. The analytical method was demonstrated to be practical for analysis of Sudan dyes in environmental water samples with good recoveries (83.5%~95.0%).