Cloud point–dispersive μ-solid phase extraction of hydrophobic organic compounds onto highly hydrophobic core–shell Fe 2 O 3 @C magnetic nanoparticles

Magnetic Nanoparticle-Based Dispersive Solid-Phase Microextraction of Three UV Blockers Prior to Their Determination by HPLC-DAD

The need for proper handling of environmental samples is significant, owing to their environmental effects on both humans and animals, as well as their immediate surroundings. In the current study, magnetic nanoparticle-based dispersive solid-phase microextraction was combined with high-performance liquid chromatography using a diode array as the detector (HPLC-DAD) for both the separation and determination of three different UV blockers, namely octocrylene, ethylhexyl methoxycinnamate, and avobenzone. The optimum conditions for the extraction were found to be as follows: Stearic acid magnetic nanoparticles (20 mg) as the sorbent, acetonitrile (100 µL) as the eluent, as well as a sample pH of 2.50, adsorption and desorption time of 1.0 min, with a 3.0 mL sample volume. The limits of detection were as low as 0.05 µg mL-1. The coefficient of determination (R2) was above 0.9950, while the percentages of relative recoveries (%RR) were between 81.2 and 112% for the three UV blockers from the environmental water samples and sunscreen products.

Hydrophobic magnetic nanoparticle assisted catanionic surfactant supramolecular solvent microextraction of multiresidue antibiotics in water samples

A novel extraction technique i.e. hydrophobic magnetic nanoparticle (MNP)-assisted in situ supramolecular solvent (SUPRAS) microextraction was proposed, and it was applied for the analysis of sulfonamides (SAs) and fluoroquinolones (FQs) in aqueous samples, coupled with high performance liquid chromatography-UV detection (HPLC-UV). In this extraction method, hexafluoroisopropanol-mediated salt-free catanionic surfactant based SUPRAS in situ microextraction was initially carried out; then, the SUPRAS was quickly adsorbed by the hydrophobic magnetic nanoparticles and gathered by an external magnetic field. This can greatly shorten the separation time and overcome the dependence on centrifugation, and also perform a secondary extraction of free analytes (not extracted by SUPRAS) from water samples. The magnetic separation ability of different hydrophobic MNPs was evaluated by adsorbing supramolecular aggregates from the water sample. The effective parameters affecting the extraction efficiency of the analytes were investigated and optimized using the one variable at a time method. About 3 min was required to realize the extraction of analytes with an enrichment factor (EF) of 12-53 for SAs and 79-118 for FQs. Compared with the centrifugation-assisted SUPRAS microextraction, the hydrophobic MNP-assisted SUPRAS microextraction obtained much better extraction and preconcentration efficiency. The proposed novel extraction method with HPLC-UV provided LODs of 0.21-0.76 ng mL-1 for SAs and 0.10-0.18 ng mL-1 for FQs. Good linearity was obtained with correlation coefficients ranging from 0.9962 to 0.9999. The intra- and inter-day recoveries of the target antibiotics were in the range of 92.0-111.3% with RSD% below 10.4%. The method was successfully applied to determine SAs and FQs in real water samples, such as lake water, river water, reservoir water, and wastewater.

Surfactant-functionalised magnetic ferum oxide coupled with high performance liquid chromatography for the extraction of phenol

The usage of phenols in the marketplace has been increasing tremendously, which has raised concerns about their toxicity and potential effect as emerging pollutants. Phenol's structure has closely bonded phenyl and hydroxy groups, thereby making its functional characteristics closely similar to that of alcohol. As a result, phenol is used as a base compound for commercial home-based products. Hence, a simple and efficient procedure is required to determine the low concentration of phenols in environmental water samples. In this research, a method of combining magnetic nanoparticles (MNPs) with surfactant Sylgard 309 was developed to overcome the drawbacks in the classical extraction methods. In addition, this developed method improved the performance of extraction when MNPs and the surfactant Sylgard 309 were used separately, as reported in the previous research. This MNP-Sylgard 309 was synthesised by the coprecipitation method and attracts phenolic compounds in environmental water samples. Response surface methodology was used to study the parameters and responses in order to obtain an optimised condition using MNP-Sylgard 309. The parameters included the effect of pH, extraction time, and concentration of the analyte. Meanwhile, the responses measured were the peak area of the chromatogram and the percentage recovery. From this study, the results of the optimum conditions for extraction using MNP-Sylgard 309 were pH 7, extraction time of 20 min, and analyte concentration of 10.0 μg mL^-1. Under the optimized conditions, MNP-Sylgard 309 showed a low limit of detection of 0.665 μg mL^-1 and the limit of quantification was about 2.219 μg mL^-1. MNP-Sylgard 309 was successfully applied on environmental water samples such as lake and river water. High recovery (76.23%-110.23%) was obtained.

Use of Nanomaterial-Based (Micro)Extraction Techniques for the Determination of Cosmetic-Related Compounds

The high consumer demand for cosmetic products has caused the authorities and the industry to require rigorous analytical controls to assure their safety and efficacy. Thus, the determination of prohibited compounds that could be present at trace level due to unintended causes is increasingly important. Furthermore, some cosmetic ingredients can be percutaneously absorbed, further metabolized and eventually excreted or bioaccumulated. Either the parent compound and/or their metabolites can cause adverse health effects even at trace level. Moreover, due to the increasing use of cosmetics, some of their ingredients have reached the environment, where they are accumulated causing harmful effects in the flora and fauna at trace levels. To this regard, the development of sensitive analytical methods to determine these cosmetic-related compounds either for cosmetic control, for percutaneous absorption studies or for environmental surveillance monitoring is of high interest. In this sense, (micro)extraction techniques based on nanomaterials as extraction phase have attracted attention during the last years, since they allow to reach the desired selectivity. The aim of this review is to provide a compilation of those nanomaterial-based (micro)extraction techniques for the determination of cosmetic-related compounds in cosmetic, biological and/or environmental samples spanning from the first attempt in 2010 to the present.

Twenty years of supramolecular solvents in sample preparation for chromatography: achievements and challenges ahead

Supramolecular solvents (SUPRAS) have progressively become a suitable alternative to organic solvents for sample preparation in chromatographic analysis. The inherent properties of these nanostructured solvents (e.g. different polarity microenvironments, multiple binding sites, possibility of tailoring their properties, etc.) offer multiple opportunities for the development of innovative sample treatment platforms not approachable by conventional solvents. In this review, major achievements attained in the combination SUPRAS-chromatography in the last 20 years as well as the challenges that should be addressed in the near future are critically discussed. Among achievements, particular attention is paid to the theoretical and practical knowledge gained that has helped make substantial progress in the area. In this respect, advances in the understanding of the mechanisms involved in SUPRAS formation and SUPRAS-solute interactions driving extractions are discussed, with a view to the setting up of knowledge-based extraction procedures. Likewise, the strategies followed to improve the compatibility of SUPRAS extracts with liquid and gas chromatography and adapt SUPRAS-based extractions to different formats are presented. Ongoing efforts to apply SUPRAS in multicomponent extractions and synthesize tailored SUPRAS for the development of innovative sample treatments are highlighted. Among challenges identified, discussion is focused on the automation of SUPRAS-based sample treatment and the elucidation of SUPRAS nanostructures, which are considered essential for their acceptance in routine labs and the design of tailored SUPRAS with programmed functions. Graphical abstract.

Novel magnetic hollow zein nanoparticles for preconcentration of chlorpyrifos from water and soil samples prior to analysis via high-performance liquid chromatography (HPLC)

Herein, magnetically hollow zein nanoparticles were synthesized and used as a magnetic sorbent for the preconcentration of chlorpyrifos and its analysis by high-performance liquid chromatography (HPLC). Morphology of the sorbent was characterized by transmission electron microscopy (TEM). In this study, the effects of important parameters such as pH of the solution, adsorption and desorption time, type and volume of desorption solvent, and salt addition were investigated. Under optimized experimental conditions, the linear range was from 50 to 2000 μg mL-1, and an LOD of 25 μg L-1 was calculated. The relative standard deviations (RSD) varied from 3.8 to 5.1% (n = 5). The enrichment factors for 50 and 100 μg L-1 samples were calculated as 187 and 210, respectively. The developed method was successfully applied in soil and water samples and showed good extraction recoveries.

Dispersion of hydrophobic magnetic nanoparticles using ultarsonic-assisted in combination with coacervative microextraction for the simultaneous preconcentration and determination of tricyclic antidepressant drugs in biological fluids

A two-step sample preparation technique based on dispersive micro solid-phase extraction combined with coacervative microextraction is presented for preconcentration and determination of tricyclic antidepressant drugs in biological samples. An important feature of the method is the application of hydrophobic magnetic nanoparticles, which in combination with coacervative microextraction method enables development of rapid and efficient extraction procedure in order to achievement of a high extraction efficiency. Simultaneous optimization by experimental design lead to improvement of method with low cost which supply useful information about interaction among variables. Under the optimized conditions, a linear range of 5-1000ngmL(-1) with detection limits from 0.51 to 1.4ngmL(-1) were obtained for target analytes. The method was successfully used for the determination of analytes in biological fluids (plasma and urine) with relative recoveries in the range of 89-105% (RSDs<3.5%).

Magnetic zinc oxide nanoflower-assisted ionic liquid-based nanofluid dispersive liquid–liquid microextraction for the rapid determination of acaricides in tea infusions

An ionic liquid based nanofluid with magnetic zinc oxide as a nanoparticle additive was used for the quick determination of acaricides.

Mixed micelle cloud point-magnetic dispersive μ-solid phase extraction of doxazosin and alfuzosin

Mixed micelle cloud point extraction (MM-CPE) combined with magnetic dispersive μ-solid phase extraction (MD-μ-SPE) has been developed as a new approach for the extraction of doxazosin (DOX) and alfuzosin (ALF) prior to fluorescence analysis. The mixed micelle anionic surfactant sodium dodecyl sulfate and non-ionic polyoxyethylene(7.5)nonylphenylether was used as the extraction solvent in MM-CPE, and diatomite bonding Fe₃O₄ magnetic nanoparticles were used as the adsorbent in MD-μ-SPE. The method was based on MM-CPE of DOX and ALF in the surfactant-rich phase. Magnetic materials were used to retrieve the surfactant-rich phase, which easily separated from the aqueous phase under magnetic field. At optimum conditions, a linear relationship between DOX and ALF was obtained in the range of 5-300 ng mL(-1), and the limits of detection were 0.21 and 0.16 ng mL(-1), respectively. The proposed method was successfully applied for the determination of the drugs in pharmaceutical preparations, urine samples, and plasma samples.

Anionic surfactant micelle-mediated extraction coupled with dispersive magnetic microextraction for the determination of phthalate esters

A novel and easy two-step microextraction technique combining anionic surfactant coacervation phase (CAP) extraction and dispersive microsolid-phase extraction (D-μ-SPE) was developed for the high-performance liquid chromatography-ultraviolet detection to determination of phthalate esters (PEs) in water samples. The method started with the phase separation of sodium dodecylbenzenesulfonic acid (SDBSA) obtained by adding NaCl, whereas the target analytes were extracted in the CAP. The CAP was then retrieved using diatomaceous earth-supported magnetite nanoparticles. The effects of solution acidity, SDBSA, and electrolyte concentration, extraction time, magnetic material quantity, and elution solvent volume were discussed. Under optimal extraction conditions, the extraction recoveries ranged from 48.6 to 84.8%, and relative standard deviations ranged from 3.9 to 5.7% (n = 10). The detection limits ranged from 0.5 to 5.0 ng mL(-1) for the five PEs. The proposed method was used to determine the five PEs in the water samples and recoveries between 85.7 and 105.5%.

Optimization of a greener method for removal phenol species by cloud point extraction and spectrophotometry

A greener method based on cloud point extraction was developed for removing phenol species including 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP) and 4-nitrophenol (4-NP) in water samples by using the UV-Vis spectrophotometric method. The non-ionic surfactant DC193C was chosen as an extraction solvent due to its low water content in a surfactant rich phase and it is well-known as an environmentally-friendly solvent. The parameters affecting the extraction efficiency such as pH, temperature and incubation time, concentration of surfactant and salt, amount of surfactant and water content were evaluated and optimized. The proposed method was successfully applied for removing phenol species in real water samples.

Development of a field sampling method based on magnetic nanoparticles for the enrichment of pesticides in aqueous samples

A field sampling method based on magnetic core–shell silica nanoparticles was developed for field sampling and the enrichment of low concentrations of pesticides in aqueous samples.

Extraction of three nitrophenols using polypyrrole-coated magnetic nanoparticles based on anion exchange process

In this research, the applicability of polypyrrole-coated Fe3O4 nanoparticles (Fe3O4@PPy NPs) as an anion exchange magnetic nanosorbent is demonstrated. For this purpose, three nitrophenols were selected as models which are acidic compounds with low logP values and their extraction in neutral form (only based on hydrophobic interactions) is difficult. The extracted nitrophenols were separated and determined by high-performance liquid chromatography-UV detection. The size, morphology and surface coating of synthesized Fe3O4@PPy NPs have been characterized via different techniques such as Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy and thermo-gravimetric analysis. The important parameters influencing the extraction efficiency were studied and optimized. Under the optimum extraction conditions (300mL sample solution with pH 10, extraction and desorption times of 10 and 2min, respectively, 500μL of 0.1M HNO3 in acetonitrile as eluent, and 40mg of adsorbent), a linear range between 0.75 and 100μgL(-1) (R(2)>0.997), and limits of detection ranging from 0.3 to 0.4μgL(-1) were obtained. Preconcentration factors in the range of 125-180 were achieved and relative standard deviations (RSDs%) were less than 4.9 (n=4) for the three nitrophenols. The analytical method was successfully applied for environmental water samples such as tap water, rain water and river water. The recoveries varied within the range of 84-109% confirming good performance of the method in various waters samples. The results showed that the proposed method is a rapid, convenient and feasible technique for determination of nitrophenols in aqueous samples.