A re-investigation of the Mark–Houwink–Sakurada parameters for cellulose in Cuen: A study based on size-exclusion chromatography combined with multi-angle light scattering and viscometry

Form-stable, crosslinked cellulose-based paper separators for charge storage applications

In the quest for greener and more efficient energy storage solutions, the exploration and utilization of renewable raw materials is essential. In this context, cellulose-derived separators play a central role in enhancing the performance of green energy storage devices. However, these often exhibit disadvantageous porosity and limited wet strength. Here, we demonstrate a facile approach to tailor thickness (ca. 40 μm), air permeability (0.1-200 cm3 s-1), and mechanical properties of separators by integration of up to 50 wt% microfibrillated cellulose (MFC) into paper sheets. While the MFC enhanced the formation of dense networks, these separators show a poor dimensional stability (folding and creasing) concomitant with a low strength under wet conditions, crucial for assembly and operation. Crosslinking with 1,2,3,4-butanetetracarboxylic acid (BTCA) however, led to an increase in wet strength by up to 6700 % while ensuring dimensional stability. The electrochemical performance, evaluated by impedance spectroscopy and galvanostatic cycling (7500 repetitions) showed comparable results as commercially available glass and polypropylene separators in terms of ion diffusion, charge-discharge rate performance, Ohmic loss and capacitance retention %. The approach demonstrates that disadvantages of paper-based separators in terms of dimensional stability and wet strength can be overcome by a paper technological approach using crosslinking strategies.

Role of intrinsic and extrinsic xylan in softwood kraft pulp fiber networks

Xylan is primarily found in the secondary cell wall of plants providing strength and integrity. To take advantage of the reinforcing effect of xylan in papermaking, it is crucial to understand its role in pulp fibers, as it undergoes substantial changes during pulping. However, the contributions of xylan that is added afterwards (extrinsic) and xylan present after pulping (intrinsic) remain largely unexplored. Here, we partially degraded xylan from refined bleached softwood kraft pulp (BSKP) and adsorbed xylan onto BSKP. Enzymatic degradation of 1 % xylan resulted in an open hand sheet structure, while adsorption of 3 % xylan created a denser fiber network. The mechanical properties improved with adsorbed xylan, but decreased more significantly after enzymatic treatment. We propose that the enhancement in mechanical properties by adsorbed extrinsic xylan is due to increased fiber-fiber bonds and sheet density, while the deterioration in mechanical properties of the enzyme treated pulp is caused by the opposite effect. These findings suggest that xylan is decisive for fiber network strength. However, intrinsic xylan is more critical, and the same properties cannot be achieved by readsorbing xylan onto the fibers. Therefore, pulping parameters should be selected to preserve intrinsic xylan within the fibers to maintain paper strength.

Effect of Dissolution Time on the Development of All-Cellulose Composites Using the NaOH/Urea Solvent System

Innovative and sustainable all-cellulose composites (ACCs) can be obtained by partial dissolution of cellulosic fibers and regeneration of the dissolved fraction. Among cellulose solvents, sodium hydroxide/urea solutions are recognized as promising low-environmental impact systems. In this work, filter paper (FP) was dissolved with a 7 wt% NaOH/12 wt% urea aqueous solution, kept at −18 °C for different time intervals, regenerated with distilled water and finally dried under different conditions. The developed films were characterized in terms of morphology, porosity, optical properties, crystalline structure, hydration and mechanical properties. The porosity of the composites decreased with dissolution time due to the progressive filling of voids as the cellulosic fibers’ surface skin layer was dissolved and regenerated. Samples treated for 4 h showed the minimum values of porosity and opacity, high hydration and a substantial change from cellulose I to cellulose II. Hot pressing during drying led to relevant improvements in ACCs stiffness and strength values.

Analysis of celluloses, plant holocelluloses, and wood pulps by size-exclusion chromatography/multi-angle laser-light scattering

Size-exclusion chromatography with multi-angle laser-light scattering and refractive index detection (SEC/MALLS/RI) provides the number- and weight-average molar masses, molar mass distributions, conformations, and linear/branched structures of polymers. In the case of pure celluloses including highly crystalline tunicate and alga celluloses, and hemicellulose-rich plant holocelluloses, soaking in ethylene diamine (EDA) and subsequent solvent exchange to N,N-dimethylacetamide (DMAc) though methanol is effective for complete dissolution in ∼8% (w/w) LiCl/DMAc. SEC/MALLS/RI analysis can, therefore, be applied to pure celluloses, chemical wood pulps, and plant holocelluloses after dissolution in ∼8% (w/w) LiCl/DMAc, dilution to 1% (w/v) LiCl/DMAc and membrane filtration. All pure celluloses and the high-molar-mass cellulose fractions of hardwood and grass holocelluloses have linear and random-coil conformations and various average molar masses and molar mass distributions depending on the cellulose and holocellulose resources. In contrast, Japanese cedar (i.e., softwood) holocellulose and softwood bleached kraft pulp have alkali-stable cellulose/glucomannan branched structures in the high-molar-mass fractions.

Inhibition of Maillard reaction in production of low-molecular-weight chitosan by enzymatic hydrolysis

A low-molecular-weight chitosan (LMWC) sample was prepared by enzymatic hydrolysis, and used for investigation of special Maillard reaction products (MRPs) and factors affecting LMWC bioactivities. After undergoing MR, LMWC turned to brown color (termed BLMWC), showed reduction of several indices of rice growth promotion. This alteration of bioactivities was attributable to MRPs in BLMWC. A special MRP, 5-hydroxy-2-pyridine methanol isomer (5-H-2PMIS), was identified by HPLC and LC-MS. Analysis of key factors affecting MR, using this MRP as monitoring target compound and OD₄₂₀ value, suggested that MR process can be minimized by storing LMWC under vacuum in a dry, low-temperature, neutral-pH environment. Na₂SO₃ was effective for inhibition of MR, at optimal concentration 0.5 %. Chemical and FTIR analyses showed that Na₂SO₃-treated sample conformed to the Chinese National Standard of chitosan (GB 29941-2013). Control of MR is essential for application of LMWC in food, pharmaceutical, and other industries.

Determination of molecular size parameters and quantification of polyacrylic acid by high performance size-exclusion chromatography with triple detection

Synthetic polyelectrolytes are a broad class of vaccine adjuvants. Among them, polyacrylic acid (PAA), a polyanionic polymer, is currently evaluated by Sanofi Pasteur. As chain length is considered to be a critical quality attribute for adjuvant properties of PAA, measurement of precise and accurate molecular size parameters is important for these polymers. In the field of synthetic polymer chemistry, methods for determination of molecular size parameters are well defined. Specifically, high performance size-exclusion chromatography (HPSEC) with multi-detection system is a method of choice. This paper describes the development of HPSEC method to well characterize and precisely quantify PAA in different adjuvant formulations. A first set of characterizations were made, with determination of dn/dc coefficient, which enabled the determination of weight- and number-average molecular weight, viscosimetric radius, and intrinsic viscosity. In-depth characterization was also made with branching study through the use of Mark-Houwink parameter determination. The quantification method was also evaluated according to validation method-like criteria: limit of detection and limit of quantification, repeatability, accuracy, and specificity with recombinant surface glycoprotein gB from human cytomegalovirus (CMV-gB) as model antigen.

Low molecular weight chitosan is an effective antifungal agent against Botryosphaeria sp. and preservative agent for pear (Pyrus) fruits

Antifungal activity and preservative effect of a low molecular weight chitosan (LMWC) sample, derived from chitosan by enzymatic hydrolysis, were investigated in vitro and in vivo. A pathogenic fungal strain was isolated from decayed pear (Pyrus bretschneideri cv. "Huangguan") fruit and identified as Botryosphaeria sp. W-01. LMWC was shown to strongly inhibit W-01 growth based on studies of minimum inhibitory concentration (MIC) and effects on mycelial biomass and radial growth of the fungus. LMWC treatment of W-01 cells reduced ergosterol synthesis and mitochondrial membrane potential (ΔY), early events of apoptosis. Transmission electron microscopy and confocal laser scanning microscopy studies revealed that LMWC penetrated inside W-01 hyphae, thereby inducing ultrastructural damage. LMWC coating had a significant preservative effect on wounded and nonwounded pear fruits, by inhibiting postharvest decay and browning processes. LMWC activated several defense-related enzymes (polyphenol oxidase, peroxidase, chitinase), maintained nutritional value, and slowed down weight loss. Our findings indicate the strong potential of LMWC as a natural preservative agent for fruits and vegetables.

Towards determination of absolute molar mass of cellulose polymer by size exclusion chromatography with mulitple angle laser light scattering detection

The study focuses on determination of a set of crucial parameters for molar mass calculation of cellulose from the results of size exclusion chromatography coupled with multiple angle laser light scattering (MALLS) and differential refractive index (DRI) detectors. In the present work, cellulose has been derivatised to obtain cellulose tricarbanilate (CTC) soluble in tetrahydrofuran (THF). The parameters of Rayleigh scattering in the MALLS detector: refractive index increment (dn/dc) and second virial coefficient (A2) of CTC in THF were determined for laser wavelength 658nm. In order to avoid errors resulting from cellulose derivatisation by-products present in the CTC solution, the so called "on-line" method of measuring dn/dc and A2 was applied. Based on the A2 determination, its influence on cellulose molar mass calculations and cellulose molecular dimensions were critically assessed. The latter includes evaluation of artificially aged cellulose towards conceivable branching by conformation plot analysis.

Molecular mass and molecular-mass distribution of TEMPO-oxidized celluloses and TEMPO-oxidized cellulose nanofibrils

Native wood cellulose was oxidized by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation, and the fibrous TEMPO-oxidized celluloses (TOCs) thus obtained were disintegrated in water to prepare TOC nanofibrils (TOCNs). The carboxyl groups of TOCs and TOCNs were methyl-esterified, and the methylated samples were dissolved in 8% LiCl/N,N-dimethylacetamide for size-exclusion chromatography/multiangle laser-light scattering (SEC-MALLS) analysis to obtain their molecular-mass (MM) values and MM distributions (MMDs). The results showed that remarkable depolymerization occurred in TOCs and TOCNs and depended on the oxidation and sonication conditions. Because single peaks without bimodal patterns were observed in the MMDs for all of the TOC and TOCN samples, depolymerization may have randomly occurred on whole cellulose molecules and oxidized cellulose molecules in the microfibrils during these treatments. Compared with the MM values obtained by SEC-MALLS, the intrinsic viscosities of TOCs dissolved in 0.5 M copper ethylenediamine solution provided lower MM values owing to depolymerization during the dissolution and postreduction processes.