Preparation of novel alumina nanowire solid-phase microextraction fiber coating for ultra-selective determination of volatile esters and alcohols from complicated food samples

[Research progress in application of metal-organic framework-derived materials to sample pretreatment]

Sample pretreatment technology plays a vital role throughout the analysis of complex samples. Sample pretreatment can not only increase the concentration of trace targets in the sample, but also effectively eliminate interference from the sample matrix in instrumental analysis. Adsorbent materials are a key component of sample pretreatment technology. Therefore, the development of efficient and stable new adsorbent materials has acquired significance in research on pretreatment technology. Porous materials are advantageous for use in diverse applications, such as in adsorbents, when they possess controllable nanostructures, a tailored pore surface chemistry, and abundant porosity, and are inexpensive. Particularly in recent years, porous materials derived from metal-organic frameworks (MOFs) feature excellent properties, such as diverse morphology and structure, adjustable pore size, high specific surface area, good thermal stability, and chemical resistance. MOF-derived materials, when used as adsorbents for sample pretreatment, offer the following advantages: (1) The porous materials derived from MOFs typically possess a larger specific surface area than other porous materials. This characteristic is beneficial to improve the extraction capacity and extraction efficiency via an increase in the contact area between the materials and targets; (2) The microscopic porous structure of MOF-derived materials can be easily tuned (by controlling the temperature and time during pyrolysis, gas atmosphere, and heating rate), which is conducive to improve the selectivity of sample pretreatment methods; (3) The metal active sites can be evenly distributed. Owing to the ordered distribution of metal ions in the precursor MOFs and a good periodic framework structure, the metal active sites of the derivatives formed can still maintain a corresponding distance. These metal active sites will not form agglomerates and affect the extraction performance; conversely, other porous materials often require extremely complicated processes to achieve a uniform distribution; (4) Heteroatoms such as nitrogen and sulfur can be easily doped on the framework of MOF-derived porous materials. This doping enables the materials to induce additional interactions such as hydrogen bonding and π-π stacking for adsorbing target analytes. The excellent properties of MOF-derived materials make them promising for use in sample pretreatment. Novel sample pretreatment methods that use MOF-derived materials are constantly being developed. However, the use of MOF-derived materials is limited by the complex preparation process and high production cost of MOF precursors, along with difficulties in mass production. Further, the precise design or functionalization of MOF-derived materials according to the characteristics of targets is a new direction with immense challenges as well as application potential. This review summarizes the application of MOF-derived materials in sample pretreatment methods, including dispersive solid phase extraction (dSPE), magnetic solid phase extraction (MSPE), solid phase microextraction (SPME), stir bar sorptive extraction (SBSE), and dispersive micro solid phase extraction (DMSPE). The preparation methods, functional control, and enrichment efficiencies of various MOF-derived materials are also reviewed. Finally, the application prospects of MOF-derived materials in sample pretreatment are discussed to provide a clear outlook and reference for further related research.

Therapeutic potential of topically administered γ-AlOOH on 2,4-dinitrochlorobenzene-induced atopic dermatitis-like lesions in Balb/c mice

Boehmite (γ-AlOOH) has a wide range of applications in a variety of industrial and biological fields. However, little is known about its potential roles in skin diseases. The current study investigated its effect on atopic dermatitis (AD). Following characterization, cytotoxicity, pro-inflammatory response and oxidative stress associated with boehmite were assessed, using TNF-α-induced keratinocytes and mast cells. In addition, therapeutic effects of boehmite, topically administered to Balb/c mice induced by 2,4-dinitrochlorobenzene (DNCB), were evaluated. Expression of cytokines (TLSP, IL-25 and IL-33) and the generation of ROS from keratinocytes induced by TNF-α were significantly inhibited by boehmite without affecting cell viability. MAPKs (ERK, JNK and p38) required for cytokine expression were suppressed by boehmite treatment. Up-regulation of cytokines (TSLP, IL-4, IL-5, IL-13, RANTES) in human mast cells treated with phorbol 12-myristate 13-acetate and calcium ionophore was also suppressed by boehmite. Boehmite improved the AD severity score, epidermal hyperplasia and transepidermal water loss in DNCB-induced AD-like lesions. Moreover, Th2-mediated cytokine expression, mast cell hyperplasia and destruction of the skin barrier were improved by boehmite treatment. Overall, we demonstrated that boehmite may potentially protect against AD.

Polypyrrole coated ZnO nanorods on platinum wire for solid-phase microextraction of amitraz and teflubenzuron pesticides prior to quantitation by GC-MS

The authors describe a new sorbent for amitraz and teflubenzuron pesticides. It consists of a platinum wire coated with polypyrrole-coated ZnO nanorods. The nanocomposite was prepared by a two-step process. In the first step, oriented ZnO nanorods were hydrothermally grown in situ on a platinum wire. Subsequently, oxidative vapor phase polymerization of pyrrole was performed on FeCl₃-impregnated ZnO nanorods to give a porous polypyrrole film. The organic/inorganic nanocomposite synthesized through hydrothermal deposition and chemical vapor deposition polymerization yields material with attractive properties. The coated wire was applied to solid-phase microextraction of amitraz (in the form of 2,4-dimethylaniline resulting from the hydrolysis of amitraz) and teflubenzuron. The effects of extraction temperature, extraction time, sample pH value and salt concentration were optimized. The analytes 2,4-dimethylaniline and teflubenzuron were then quantified by GC-MS. Under optimum conditions, the LODs range between 0.1 and 0.15 ng.mL^-1. Relative standard deviations at two concentration are <8.3% for intraday precision and <10.3% for inter-day precision. In all cases, the fiber to fiber reproducibility is <12.2%. For both analytes the linear dynamic ranges are 0.5-300 ng.mL^-1. The procedure was successfully applied to the analysis of spiked agricultural water samples. Graphical abstract A novel inorganic/organic hybrid nanocomposite was synthesized through in situ hydrothermal deposition of ZnO nanorods and ten placing a thin layer of polypyrrole on them by chemical vapor deposition polymerization. This nanocomposite was applied to fabricate a solid-phase microextraction fiber for the extraction of amitraz and teflubenzuron pesticides residue from agricultural samples prior to their quantitation by GC-MS.

Preparation of Alumina Nanorods from Chromium-Containing Alumina Sludge

Alumina nanorods were prepared from chromium-containing alumina sludge, and the effects of doping elements, such as Cr, Fe, and Mg, were researched. The results show that the crystal transformation of alumina is restricted by the doped Cr and facilitated by the doped Fe and Mg, which is transformed from θ-Al₂O₃ to α-Al₂O₃ in the calcination process. Meanwhile, the crystal transformation of alumina is strongly restrained by co-doped elements from the chromium-containing alumina sludge. The doped elements change the course of phase structure transformation and slightly transform the chemical bond of the alumina nanorods. The impure elements are doped in the alumina crystal and restrain the crystalline growth of alumina nanorods according to the rules. In the sample prepared from chromium-containing alumina sludge, more Cr and Mg but fewer Fe are doped, and most Cr are existed as Cr(III). It is possible that the Fe-doping is confined by the competition of Cr and Mg. Moreover, the lattice imperfection of alumina is caused by doped ions, such as Cr, Fe, and Mg, and the chemical state of O and Al are affected. The findings by these experiments provide essential information for eliminating pollution and promoting comprehensive utilization of the chromium-containing alumina sludge.

A novel molybdenum disulfide nanosheet self-assembled flower-like monolithic sorbent for solid-phase extraction with high efficiency and long service life

A novel material consisting of molybdenum disulfide (MoS₂) nanosheet that self-assemble into flower-like microspheres which aggregate to form a monolithic matrix with a micro or nano-scaled mesopore structure was successfully synthesized and used as an efficient sorbent for solid-phase extraction (SPE) due to its large specific adsorption area and good stability. The extraction properties of the as-prepared sorbent were evaluated by high-performance liquid chromatography with variable wavelength detection (HPLC-VWD) by analyzing four flavonoids (apigenin, quercetin, luteolin, and kaempferol). Under optimal conditions, the LODs and LOQs were found to be in the ranges of 0.1-0.25 and 0.4-0.5μgL^-1, respectively, and wide linear ranges were obtained with correlation coefficients (R) ranging from 0.9991 to 0.9996. Compared with commercial C18 and Alumina-N sorbents, the as-prepared sorbent showed high extraction efficiency at different concentrations of flavonoids. After 100 uses, the extraction ability of the self-assembled MoS₂ nanosheet monolithic sorbent had no evident decline, denoting a long service life. Finally, the SPE-HPLC-VWD method using the as-prepared sorbent was applied to flavonoid analysis in beverage samples with satisfactory results.

A novel Schiff base network-1 nanocomposite coated fiber for solid-phase microextraction of phenols from honey samples

A novel covalent organic framework, Schiff base network-1 (SNW-1), was synthesized and used as a solid-phase microextraction (SPME) fiber coating material. The SNW-1 coated SPME fiber was fabricated by a covalent chemical cross-linking between the SNW-1 nanocomposite and a silanol-functionalized stainless steel wire substrate. Scanning electron microscopy and nitrogen isothermal adsorption results indicate that the new fiber coating exhibited a porous, homogenous surface with the Brunauer-Emmett-Teller surface of 668m²g^-1. The prepared fiber was explored for the SPME of phenols from honey samples prior to their determination by gas chromatography-mass spectrometry. The developed method had large enrichment factors (136-816), low limits of detection (0.06-0.2ngg^-1), good linearity (0.1-100.0ngg^-1) and repeatability (<9.7%) for phenols. The recoveries for spiked phenols (1.0ngg^-1 and 10.0ngg^-1) in Wolfberry, Robinia and Codonopsis honey samples were in the range of 84.2-107.2% with the relative standard deviations ranging from 3.8% to 12.7%. The developed method was suitable for the determination of phenols from honey samples.

A nanoporous carbon material derived from pomelo peels as a fiber coating for solid-phase microextraction

A novel nanoporous carbon derived from a biomass source was prepared and used as an SPME fiber coating.

Ordered mesoporous carbon/Nafion as a versatile and selective solid-phase microextraction coating

In this study, ordered mesoporous carbon (OMC) with large surface area (1019m(2)g(-1)), uniform mesoporous structure (pore size distribution centering at 4.2nm) and large pore volume (1.46cm(3)g(-1)) was synthesized using 2D hexagonally mesoporous silica MSU-H as the hard template and sucrose as the carbon precursor. The as-synthesized OMC was immobilized onto a stainless steel wire using Nafion as a binder to prepare an OMC/Nafion solid-phase microextraction (SPME) coating. The extraction characteristics of the OMC/Nafion coating were extensively investigated using a wide range of analytes including non-polar (light petroleum and benzene homologues) and polar compounds (amines and phenols). The OMC/Nafion coating exhibited much better extraction efficiency towards all selected analytes than that of a multi-walled carbon nanotubes/Nafion coating with similar length and thickness, which is ascribed to its high surface area, well-ordered mesoporous structure and large pore volume. When the OMC/Nafion coating was used to extract a mixture containing various kinds of analytes, it possessed excellent extraction selectivity towards aromatic non-polar compounds. In addition, the feasibility of the OMC/Nafion coating for application in electrochemically enhanced SPME was demonstrated using protonated amines as model analytes.

Preparation of multiwalled carbon nanotubes/hydroxyl-terminated silicone oil fiber and its application to analysis of crude oils

A simple and efficient method to analyze the volatile and semivolatile organic compounds in crude oils has been developed based on direct immersion solid-phase microextraction coupled to comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry (DI-SPME-GC × GC/TOFMS). A novel fiber, multiwalled carbon nanotubes/hydroxyl-terminated silicone oil (MWNTs-TSO-OH), was prepared by sol-gel technology. Using standard solutions, the extraction conditions were optimized such as extraction mode, extraction temperature, extraction time, and salts effect. With the optimized conditions, a real crude oil sample was extracted and then analyzed in detail. It shows that the proposed method is very effective in simultaneously analyzing the normal and branched alkanes, cycloalkanes, aromatic hydrocarbons, and biomarkers of crude oil such as steranes and terpanes. Furthermore, the method showed good linearity (r > 0.999), precision (RSD < 8%), and detection limits ranging from 0.2 to 1.6 ng/L.