The incorporation of calix[6]arene and cyclodextrin derivatives into sol–gels for the preparation of stationary phases for gas chromatography

Synthesis of C3v-Symmetrical 1,3,5-Tris-Protected Calix[6]arene-Based Molecular Platforms

Few synthetic methodologies that yield tris-functionalized C3v-symmetrical calix[6]arenes have been reported. In this work, three allyl protecting groups are selectively placed in 1,3,5 alternate positions of three pristine calix[6]arenes, each differing by their substituent on the large rim, resulting in three new C3v-symmetrical molecular platforms. Removal of the protecting allylic groups gives access to sophisticated calix[6]arenes that can be further modified. The potential of these new C3v-symmetrical molecular platforms is notably exemplified through the development of a new family of calix[6]arene-based N ligands.

Separation performance of the calix[8]arene functionalized with polyethylene glycol units for capillary gas chromatography

In this paper, an amphiphilic calix[8]arene with polyethylene glycol unit branches (C8A-PEG) was synthesized and applied for capillary gas chromatography (GC). The C8A-PEG was coated on the inner wall of a capillary column by a static method with the column efficiency of 3165 plates/m and polar nature. As demonstrated, the C8A-PEG column has excellent physicochemical properties and separation performance since it has π-electron-rich 3D cavity which combines with polar PEG units. Compared with two columns corresponding to the construction units C8A and PEG, the C8A-PEG column shows distinctly advantageous performance for the mixture of 22 components with diverse types. Impressively, it shows satisfactory resolution for positional isomers and cis-/trans- isomers, especially the challenging isomers of toluidine and dimethylaniline. The outstanding distinguishing capability of the C8A-PEG stationary phase is mainly attributed to the abundant molecular recognition interactions, including van der Waals, dipole-dipole, H-bonding and π-π stacking interactions. This work has proved that the new GC stationary phases constructed by different units can complement each other's advantages, improve their physicochemical properties and separation performance, and have broad application prospects in chromatographic analysis.

A 4-state acid-base controlled molecular switch based on a host-guest system

A novel Zn^II funnel complex that presents three phenol functions within a calix[6]arene macrocycle is described. Host-guest studies, monitored by ¹H NMR spectroscopy, evaluate the impact of the replacement of three anisole moieties present in a previously described system with phenols. It is now shown that the dicationic complex is responsive to anions, whereas deprotonation of one phenol unit completely inhibits any hosting response. These properties, combined with those of the corresponding protonated ligand, allow us to obtain different molecular switches, and one of them shows guest embedment changes between four different host states, thus giving rise to a rare case of a triple molecular switch.

Evaluation of Gas Chromatography Columns with Radially Elongated Pillars as Second-Dimension Columns in Comprehensive Two-Dimensional Gas Chromatography

The present study investigated the use of a dedicated gas chromatography (GC) column (L = 70 cm, 75 μm deep, and 6.195 mm wide) with radially elongated pillars (REPs) as the second column in a comprehensive two-dimensional gas chromatography (GC × μGC) system. Three stationary phases [apolar polydimethylsiloxane (PDMS), medium polar room-temperature ionic liquid (RTIL) based on monocationic phosphonium, and polar polyethylene glycol (PEG-1000)] have been coated using the static method at constant pressure or using an original vacuum pressure program (VPP) from 400 to 4 mbar. The best efficiency reached up to N = 62,000 theoretical plates for a film thickness of 47 nm at 100 °C for an iso-octane peak (k = 0.16) at an optimal flow rate of 4.8 mL/min. The use of the VPP improved the efficiency by approximately 15%. Efficiencies up to 28,000 and 47,000 were obtained for PEG-1000 and RTIL, respectively. A temperature-programmed separation of a mixture of 11 volatile compounds on a PDMS-coated chip was obtained in less than 36 s. The PDMS-, PEG-1000-, and RTIL-coated chips were tested as the second column using a microfluidic reverse fill/flush flow modulator in a GC × μGC system. The REP columns were highly compatible with the operating conditions in terms of flow rate and with more than 30,000 plates for the iso-octane peak. Moreover, a commercial solvent called white spirit containing alkanes and aromatic compounds was injected in three sets of columns in normal and reverse modes, demonstrating the great potential of the chip as a second-dimension separation column.

Design, synthesis, and characterization of a series of novel β-cyclodextrin functional monomers

In order to increase its solubility in water and improve β-cyclodextrin combination with guest molecules, chemical modification of β-cyclodextrin is a feasible and effective method. A variety of β-cyclodextrin derivatives are designed and introduced for pharmaceutical complexation and analytical chemistry application. In this study, a series of β-cyclodextrin derivatives containing unsaturated bonds is designed and synthesized. The products are characterized by MS, FTIR, 1H NMR, and 13C NMR. Some of the functional monomers may be used in the preparation of molecularly imprinted polymers, and preliminary studies have shown excellent molecular recognition ability. The prepared β-cyclodextrin functional monomers have potential application value in molecular recognition materials based on polymers.

Selective modifications at the different positions of cyclodextrins: a review of strategies

Cyclodextrins (CDs) are natural, nontoxic, and biodegradable macrocyclic oligosaccharides. As supramolecular hosts, CDs have numerous applications in many aspects. However, nonsubstituted CDs have the disadvantages of solubility, unspecific recognition sites, and weak interactions with guest molecules. Therefore, new CD-based derivatives are successfully designed, synthesized, and widely used in various fields. This contribution outlines the research progress in CD derivatives. In particular, this review emphasizes the synthesis and application of CDs modified through functionalization in definite positions, random substitution, and reconstruction of the skeleton. At the end of this review, a summary and future directions are presented.

Separation Performance of Capillary Gas Chromatography Based on Monohydroxycucurbit[7]Uril Incorporated Into Sol-Gels as the Stationary Phase

A novel monohydroxycucurbit[7]uril-based stationary phase for capillary gas chromatography (GC) has been produced. For this, a capillary column coating was made using a sol–gel technique, incorporating synthesized monohydroxycucurbit[7]uril [(OH)Q[7]] and hydroxy-terminated poly(dimethylsiloxane) (OH-PDMS) into the sol–gel network through hydrolysis and polycondensation and chemical sol–gel grafting to the inner wall of a fused-silica tube. The preparation method may produce a coating with greater integrity, which gives the prepared column a higher separation efficiency and better selectivity toward analytes than a reported stationary phase based on neat cucurbit[n]urils (Q[n]s). The prepared (OH)Q[7]/PDMS column had 3,225 theoretical plates per meter determined using naphthalene at 120°C and exhibited a weakly polar nature. The (OH)Q[7]/PDMS column has high resolution over a broad spectrum of analytes with symmetrical peak shapes and exhibited better separation performance than commercial capillary columns and reported columns based on neat Q[n]s that failed to resolve some critical analytes. Moreover, the column also showed good thermal stability up to 300°C and separation repeatability with relative standard deviation values in the range of 0.01–0.11% for intraday, 0.11–0.32% for interday and 0.29–0.58% for column-to-column. In addition, the energy effect on the retention of analytes on the (OH)Q[7]/PDMS stationary phase was investigated. The results indicated that retention on the column was determined mainly by the enthalpy change. As demonstrated, the proposed coating method can address some disadvantages that exist with the reported Q[n]s columns and combine the full advantages of (OH)Q[7] with the sol–gel coating method while achieving outstanding GC separation performance.

A novel column fabrication approach for capillary gas chromatography via a cross-linked organogel network with high stability and inertness

A new column fabrication approach for capillary gas chromatography with high column selectivity, stability and inertness.

Adenine-functionalized polypropylene glycol: A novel stationary phase for gas chromatography offering good inertness for acids and bases combined with a unique selectivity

This work presents the investigation of utilizing adenine-functionalized polypropylene glycol (APPG) for capillary gas chromatographic separations. The statically coated APPG column (0.25 mm i.d.) showed moderate polarity and high column efficiencies of 4660 plates/m and 4376 plates/m determined by n-octanol and naphthalene, respectively. Remarkably, the APPG column baseline resolved all the components of the Grob test mixture and displayed good peak shapes for some stringent analytes that are prone to peak tailing or severe adsorption. Also, it achieved complete separation of dimethylaniline isomers, which are difficult to be resolved due to their high resemblance in structures and properties. The above results demonstrate the high selectivity and inertness of the APPG column and its distinct advantages over the polypropylene glycol (PPG) column and commercial polyethylene glycol (PEG) column. In addition, its separation performance has good repeatability with the RSD values on retention times below 0.05% for run-to-run, 0.11-0.12% for day-to-day and 1.7-1.9% for column-to-column, respectively. Further, the APPG column was applied to determination of isomer impurities in commercial dimethylaniline products and to determination of the additives of anilines and phenols in a hair-dye product, proving its great potential for practical GC analysis.

Triptycene-based stationary phases for gas chromatographic separations of positional isomers

This work presents the investigation of two triptycene-based materials (TP-3OB and TP-3Im) as the stationary phases for gas chromatographic (GC) separations. The TP-3OB and TP-3Im capillary columns fabricated by static coating exhibited column efficiency of 3000-3500 plates/m for n-dodecane at 120 °C. Also, their McReynolds constants and Abraham system constants were determined to characterize their polarity and molecular interactions with analytes. On the basis of the unique 3D TP architecture, the TP-3OB and TP-3Im stationary phases exhibited complementary high-resolution performance for analytes of a wide ranging polarity, including alkylbenzenes, alkylnaphthalenes, halobenzenes, phenols and anilines, respectively. Moreover, the TP-based columns exhibited good repeatability and reproducibility on the retention times of analytes with the relative standard deviation (RSD) values in the range of 0.01-0.14% for run-to-run, 0.11-0.47% for day-to-day and 0.68-4.7% for column-to-column, respectively. Additionally, their applications for the determination of isomer impurities in the commercial reagents of o-dichlorobenzene, p-/m-diethylbenzene, o-toluidine and 2,3-/3,5-xylidine proved their good potential for practical analysis. This work demonstrates the promising future of the triptycene-based stationary phases for chromatographic separations.

Separation performance of p-tert-butyl(tetradecyloxy)calix[6]arene as a stationary phase for capillary gas chromatography

This work presents the first example of the utilization of p-tert-butyl(tetradecyloxy)calix[6]arene (C6A-C10) as a stationary phase for capillary gas chromatographic (GC) separation.

Performance and selectivity of lower-rim substituted calix[4]arene as a stationary phase for capillary gas chromatography

This work presents the investigation of p-tert-butyl(tetradecyloxy)calix[4]arene (C4A-C10) as stationary phase for capillary gas chromatographic (GC) separations. The statically-coated C4A-C10 capillary column showed weak polarity and column efficiency of 2566 plates per m determined by n-dodecane at 120 °C. Impressively, the C4A-C10 column exhibited extremely high resolving capability for a wide range of analytes from nonpolar to polar, including n-alkanes, esters, ketones, aldehydes, alcohols and bromoalkanes. Most importantly, the C4A-C10 column exhibited an excellent separation performance for positional, structural and cis-/trans-isomers. Among them, the column displayed advantageous resolving capability over the commercial polysiloxane stationary phase for aromatic amine isomers. Moreover, the C4A-C10 column showed good column repeatability with RSD values below 0.06% for run-to-run, 0.12–0.27% for day-to-day and 2.8–5.3% for column-to-column.

This work presents the investigation of p-tert-butyl(tetradecyloxy)calix[4]arene (C4A-C10) as stationary phase for capillary gas chromatographic (GC) separations.

High-resolution turbulent flow chromatography

The resolution power of turbulent flow chromatography using carbon dioxide as the mobile phase and coated (crosslinked methyl phenyl polysiloxane) open tube columns (OTCs) as the stationary phase was investigated under retentive conditions (0 <k< 1). The improvement in column efficiency from a laminar to a turbulent flow regime was accurately measured for small molecules (coronene and benzo[a]anthracene). This relative increase in column performance decreased from 9 to 5, 3, and to 3 with increasing the retention factor from 0 to 0.2, 0.5, and to 1.0, respectively. Despite a four to five orders of magnitude larger sample dispersion coefficient in turbulent than in laminar flow, the mass transfer in turbulent flow chromatography is still controlled and limited by the slow sample transport across the viscous layer at the column wall. The benefit of turbulent flow chromatography is then restricted to small retention factor (k< 0.2). From a practical viewpoint, turbulent flow chromatography using carbon dioxide as the mobile phase and 20 m long × 180 μm i.d. × 0.2 μm film thickness OTCs provides ultra-fast (analysis time < 10 s) and high-resolution (plate counts of 33,000) separations of weakly retained compounds (k∼0.1) at Reynolds number around 5000 (3.75 mL/min, 3000 psi back pressure).

Preparation and evaluation of a chiral HPLC stationary phase based on cone calix[4]arene functionalized at the upper rim with l-alanine units

Here we report a new chiral stationary phase (CSP) immobilized on silica gel based on cone calix[4]arene functionalized at the upper rim with two l-alanine units as new chiral selector that has been used in high-performance liquid chromatography. The CSP was prepared by covalently bonding the allyl groups at the lower rim of calix[4]arene to silica gel by thiol-ene click chemistry reaction. Elemental analysis of the CSP showed that 120 μmol of chiral selector bonded per gram of silica gel. 1-Hexene was used for end-capping of unreacted mercapto groups on silica gel. Since the CSP is chemically bonded to the silica, it can be used in the normal-phase and reversed-phase mode and with halogenated solvents as mobile phases, if desired. The chromatographic performance of the CSP was evaluated in the enantioseparation of the 3,5-dinitrobenzoyl derivatives of some amino acids, diclofop-methyl and dl-mandelic acid.