Effect of alcohol aggregation on the retention factors of chiral solutes with an amylose-based sorbent: Modeling and implications for the adsorption mechanism

Heterogenous adsorption mechanisms for describing enantioselective retention in normal-phase liquid chromatography

In this study, the enantioselective retention behaviors of methyl mandelate (MM) and benzoin (B) were investigated using Chiralpak IB as a sorbent and ethanol, 1-propanol, and 1-butanol as solvent modifiers in the normal-phase mode. For both MM and B, similar chiral recognition mechanisms were observed, potentially involving at least two types of chiral adsorption sites. With a retention model describing local retention behaviors, an enantioselectivity model based on a three-site model was proposed to describe the data. Fitted parameters were also used to analyze the contributions of each type of adsorption site to the apparent retention behavior. Combining the local retention model with the three-site model provided a qualitative and quantitative explanation for the correlation between modifier concentration and enantioselectivity. Overall, our results indicated that heterogeneous adsorption mechanisms are a key aspect in understanding enantioselective retention behaviors. Distinct local adsorption sites contribute differently to apparent retention behaviors, with these contributions being influenced by the mobile phase composition to varying degrees. Hence, enantioselectivity changes with variations in modifier concentration.

Effect of mobile-phase modifiers on the enantioselective retention behavior of methyl mandelate with an amylose 3,5-dimethylphenylcarbamate chiral stationary phase under reversed-phase conditions

In this study, methanol, ethanol, n-propyl alcohol, isopropyl alcohol, acetone, and tert-butanol were used as organic modifiers in reversed-phase mode chiral liquid-chromatography to systematically investigate the effects of mobile phase components on the enantioselective retention behavior of methyl mandelate with immobilized amylose 3,5-dimethylphenylcarbamate-based sorbent called Chiralpak IA. A two-site enantioselective model was used to obtain information on the recognition mechanisms by observing the dependence of the enantioselectivity and retention factor difference on the modifier content. Similar enantioselective retention behaviors were observed for all modifiers, and characteristic modifier concentration points (P_L , P_M , and P_H ) were identified. At modifier concentrations up to P_M , the weakened hydrophobic environment resulted in polymer structural relaxation, which changed the recognition mechanisms. By contrast, at concentrations beyond P_H , considerably different enantioselectivity behaviors were observed, indicating that the existence of dipole-dipole interaction, which was stronger at higher modifier concentrations, contributed to the retention mechanisms. The concentrations at which these characteristic points occurred were dependent on the carbon number of the modifier molecule. Modifiers with more carbon numbers facilitated the transition in the enantioselective behaviors. These results demonstrated that the proposed method can provide a physically consistent quantitative description of enantioselective retention behavior in reversed-phase mode.

Retention modeling and adsorption mechanisms in reversed-phase liquid chromatography

To interpret the dependence of solute retention behavior on modifier content in reversed-phase liquid chromatography, a theoretical framework, based on the concentration dependence of solvophobic forces imposed on solutes and the competitive adsorptions of solutes and solvent modifiers, was proposed. The generality of the developed model was demonstrated by comparing the model with conventional retention models. The linear dependence of the Gibbs energy change of solute adsorption with respect to the modifier concentration was assumed, and the model was fitted to the experimental results, with good agreement demonstrated between the experimental data and the model. Retention behaviors were inferred to be determined by two key dimensionless groups that represented the reductions in the retention factors resulting from a weakened solvophobic interaction and modifier competitive adsorption. The retention behaviors were successfully deconvoluted for each contribution as a function of the modifier concentration by using the fitted parameters. The effects of both contributions on the retention behaviors were enhanced for the solutes with aromatic groups. The standard Gibbs energy change _SL^o of benzene adsorption was found to depend linearly on the number of modifier molecules present but independent of modifier identity. For the solutes associated with hydrogen-bonding groups, the degree of reduction in the solvophobic interactions was considerably reduced. Hence, the relative contributions of both mechanisms to solute retention depend greatly on the solute structure. Perturbation method was performed to investigate the modifier adsorption mechanisms. The results show that the standard Gibbs energy change _SL^o for the first-layer adsorption of modifiers changed linearly with the carbon number of modifier molecule. These results demonstrated that the proposed model can offer a physically consistent quantitative description of retention when solvent composition is varied.

Effect of 2-propanol content on solute retention mechanisms determined using amylose tris(3,5-dimethylphenylcarbamate) chiral stationary phase under normal- and reversed-phase conditions

The electrostatic interactions between chiral solutes and polysaccharide (PS)-based chiral selectors are the key to achieving chiral recognition; however, PS-based sorbents, derivatized of phenyl moieties, can exhibit considerably non-polar characteristics, and they are also useful for the separation of enantiomers in the reversed-phase mode. In this study, an immobilized amylose 3,5-dimethylphenylcarbamate-based sorbent was used to investigate the balance between electrostatic interactions and solvophobic interactions, with complementary effects on solute retention behavior when the isopropanol (IPA) concentration was altered. It was proposed that in both normal- and reversed-phase modes, information on the retention mechanisms could be obtained by observing the curvature of the logarithm of the retention factor versus the logarithm of the IPA concentration, and the slope values of the curves were related to the number of displaced IPA molecules upon solute adsorption. Using the proposed model and the two-site adsorption model, the retention behaviors of pantolactone (PL) enantiomers in both normal- and reversed-phase modes were investigated. The PL-sorbent interactions were classified into four types: electrostatic/enantioselective, electrostatic/nonselective, solvophobic/enantioselective, and solvophobic/nonselective. At IPA concentrations below 50 vol.% in n-hexane, the retention behaviors of PL were dominated by electrostatic/enantioselective sites, whereas at IPA concentrations beyond 50 vol.%, the solvophobic interactions of PL-sorbent were strengthened and mostly nonselective. By contrast, in the reversed-phase mode, a reverse in the enantiomeric elution order of PL was observed at 10 vol.% IPA, and considerably different enantioselectivity behaviors were found below and above 20 vol.%, indicating an abrupt change in the sorbent molecular environment. At IPA concentrations beyond 40 vol.%, the presence of PL-sorbent electrostatic interactions enhanced chiral recognition.

Effect of solvents on the chiral recognition mechanisms of immobilized cellulose-based chiral stationary phase

The effect of solvents on the enantioselectivities of four structurally similar chiral solutes with a cellulose derivative-based chiral stationary phase, Chiralpak IB, were studied using acetone (AC), 2-propanol (IPA), and tert-butanol (TBA) separately as polar modifiers. The enantioselectivities α of benzoin and methyl mandelate decrease with an increase in modifier concentration C_M, whereas the enantioselectivity of pantolactone increased with increasing AC concentration. These results were attributed to the heterogeneous adsorption mechanisms of enantiomers. To interpret the dependence of enantioselectivity on modifier content, an enantioselectivity model based on a two-site adsorption model was proposed. The dependence of α on C_M was inferred to be mainly due to the distinct modulating effects of modifier concentration on the two adsorption sites: the nonselective type-I site and enantioselective type-II site. The model fitted the benzoin data satisfactorily over a wide TBA concentration range. The retention factors as a function of TBA concentration were successfully deconvoluted for each site. With the use of the proposed model, it was inferred that the chiral recognitions of benzoin and methyl mandelate were mainly achieved by the presence of an aromatic group adjacent to the hydroxyl group. When using IPA and TBA separately as modifiers, the presence of an aromatic group adjacent to the ketone group mainly contributed to the nonselective π interactions and enantioselective steric interactions, respectively. These results, along with those of the modifier adsorption isotherms, determined using the perturbation method, as well as the retention behaviors of various achiral solutes, indicate that the molecular recognition mechanism of IB sorbent is highly sensitive to the adsorbate's molecular geometry. The molecular environment of the sorbent can be controlled using different modifiers, leading to distinct adsorption and retention mechanisms.

Recognition Mechanisms of Chiral Selectors: An Overview

Stereospecific recognition of chiral molecules plays an important role in nature as the basis of the interaction of chiral bioactive compounds with the chiral target structures. In separation sciences such as chromatographic and capillary electromigration techniques, interactions between chiral analytes and chiral selectors, i.e., the formation of transient diastereomeric complexes in thermodynamic equilibria, are the basis for chiral separations. Due to the large structural variety of chiral selectors, different structural features contribute to the overall chiral recognition process. This introductory chapter briefly summarizes the present understanding of the structural enantioselective recognition processes for various types of chiral selectors.

Chiral recognition in separation science - an update

Stereospecific recognition of chiral molecules is an important issue in various aspects of life sciences and chemistry including analytical separation sciences. The basis of analytical enantioseparations is the formation of transient diastereomeric complexes driven by hydrogen bonds or ionic, ion-dipole, dipole-dipole, van der Waals as well as π-π interactions. Recently, halogen bonding was also described to contribute to selector-selectand complexation. Besides structure-separation relationships, spectroscopic techniques, especially NMR spectroscopy, as well as X-ray crystallography have contributed to the understanding of the structure of the diastereomeric complexes. Molecular modeling has provided the tool for the visualization of the structures. The present review highlights recent contributions to the understanding of the binding mechanism between chiral selectors and selectands in analytical enantioseparations dating between 2012 and early 2016 including polysaccharide derivatives, cyclodextrins, cyclofructans, macrocyclic glycopeptides, proteins, brush-type selectors, ion-exchangers, polymers, crown ethers, ligand-exchangers, molecular micelles, ionic liquids, metal-organic frameworks and nucleotide-derived selectors. A systematic compilation of all published literature on the various chiral selectors has not been attempted.