Novel and simple headspace in-tube microextraction coupled with capillary electrophoresis

Progress in on-line, at-line, and in-line coupling of sample treatment with capillary and microchip electrophoresis over the past 10 years: A review

The review presents an evaluation of the development of on-line, at-line and in-line sample treatment coupled with capillary and microchip electrophoresis over the last 10 years. In the first part, it describes different types of flow-gating interfaces (FGI) such as cross-FGI, coaxial-FGI, sheet-flow-FGI, and air-assisted-FGI and their fabrication using molding into polydimethylsiloxane and commercially available fittings. The second part deals with the coupling of capillary and microchip electrophoresis with microdialysis, solid-phase, liquid-phase, and membrane based extraction techniques. It mainly focuses on modern techniques such as extraction across supported liquid membrane, electroextraction, single drop microextraction, head space microextraction, and microdialysis with high spatial and temporal resolution. Finally, the design of sequential electrophoretic analysers and fabrication of SPE microcartridges with monolithic and molecularly imprinted polymeric sorbents are discussed. Applications include the monitoring of metabolites, neurotransmitters, peptides and proteins in body fluids and tissues to study processes in living organisms, as well as the monitoring of nutrients, minerals and waste compounds in food, natural and wastewater.

Single bubble in-tube microextraction coupled with capillary electrophoresis

Headspace (HS) extraction is a sample pretreatment technique for volatile and semivolatile organic compounds in a complex matrix. Recently, in-tube microextraction (ITME) coupled with CE using an acceptor plug placed in the capillary inlet was developed as a simple but powerful HS extraction method. Here, we present single bubble (SB) ITME using a bubble hanging to the capillary inlet immersed in a sample donor solution as a HS of submicroliter volume (∼200 nL). The analytes evaporated to the bubble were extracted into the acceptor phase through the capillary opening, then electrophoresis of the enriched extract was carried out. Since the bubble volume was much smaller than a conventional HS volume (∼1 mL), it was filled with the evaporated analytes rapidly and the analytes could be enriched much faster compared to conventional HS-ITME. Owing to the high surface-to-volume ratio of the SB, 5 min SB-ITME yielded the enrichment factor values similar to those of 10 min HS-ITME. When 5 min SB-ITME at room temperature was applied to a tap water sample, the enrichment factors of 2,4,6-trichlorophenol (TCP), 2,3,6-TCP, and 2,6-dichlorophenol were 53, 41, and 60, respectively, and the LOQs obtained by monitoring the absorbance at 214 nm were 5.6-8.3 ppb, much lower than 200 ppb, the World Health Organization guideline for the maximum permissible concentration of 2,4,6-TCP in drinking water.

Zeolitic imidazolate framework-8/ fluorinated graphene coated SiO2 composites for pipette tip solid-phase extraction of chlorophenols in environmental and food samples

In this work, a novel composite adsorbent was successfully prepared by zeolite imidazolate framework-8/fluorinated graphene layer-by-layer covalently bonded on SiO₂ microspheres, and followed to be packed into micro pipette tip for extraction of trace chlorophenols prior to their detection by high performance liquid chromatography (HPLC). The morphology and structure of adsorbent material was characterized by field emission scanning electron microscopy with energy dispersive spectrometer, X-ray diffraction, and N₂ adsorption. The parameters including the amount of adsorbent, sampling volume, sampling rate, sample pH, and desorption solvent affected the extraction performance was systematically investigated by pipette tip solid-phase extraction (PT-SPE) coupled with HPLC analysis. Under the optimized condition, the linearity of this method ranged from 20 to 2000 ng mL^-1 for chlorophenols (CPs) with determination coefficient higher than 0.99. The limit of detection (at a signal-to-noise ratio of 3) were in the range 2-20 ng mL^-1 for tap water and black tea drinks, 0.2-2 μg g^-1 for honey. The relative recoveries of the CPs from spiked samples ranged from 71.8% to 104.7%, with relative standard deviations less than 6.2%. The filled extraction tube exhibited good stability and reproducibility. The proposed method has been successfully used to detect CPs in water and drinks with satisfactory recoveries.

Analyte focusing by micelle collapse for liquid extraction surface analysis coupled with capillary electrophoresis of neutral analytes on a solid surface

Liquid extraction surface analysis (LESA) has an advantage of directly sampling analytes on a surface, thus avoiding unnecessary dilution by homogenization of the bulk sample commonly practiced in solid sample analysis. By combining LESA with CE, the additional advantage of separating analytes before detection can be accomplished. For neutral molecules, MEKC needs to be used. Since the detection sensitivity of CE in general suffers from the small capillary dimension, analyte focusing by micelle collapse was employed for enhanced extraction in LESA and sample preconcentration for MEKC. In addition, using a commercial CE instrument, the LESA process was performed much faster and more reliably compared to our first demonstration of LESA-CE using a homemade CE setup. Three neutral water-insoluble pesticides sprayed on an apple skin were directly extracted, preconcentrated, and analyzed by the automated LESA-analyte focusing by micelle collapse-MEKC with high sensitivity in 10 min. The relative standard deviations of the migration times and peak heights were 0.8-2.1 and 1.2-3.0%, respectively when ametryn was used as an internal standard. The limits of detection obtained with UV absorbance at 200 nm were 1.8-6.4 ppb.

Ionic liquid-based headspace in-tube liquid-phase microextraction coupled with capillary electrophoresis for sensitive detection of phenols

An ionic liquid-based headspace in-tube liquid-phase microextraction (IL-HS-ITLPME) in-line coupled with capillary electrophoresis (CE) is proposed. The method is capable of quantifying trace amounts of phenols in environmental water samples. In the newly developed method, simply by placing a capillary injected with IL in the HS above the aqueous sample, volatile phenols were extracted into the IL acceptor phase in the capillary. After extraction, electrophoresis of the phenols in the capillary was carried out. Extraction parameters such as the extraction time, extraction temperature, ionic strength, volume of the sample solution and IL types were systematically investigated. Under the optimized conditions, enrichment factors for four phenols were from 1510 to 1985. The proposed method provided a good linearity, low limits of detection (below 5.0 ng mL-1 ), and good repeatability of the extractions (RSDs below 6.7%, n = 6). This method was then utilized to analyze two real environmental samples of Xiaoxi Lake and tap water, obtaining acceptable recoveries and precisions. Compared with the usual HS-ITLPME for CE, IL-HS-ITLPME-CE is a simple, low-cost, fast and environmentally friendly pre-concentration technique. This article is protected by copyright. All rights reserved.

Sensitive arsenic speciation by capillary electrophoresis using UV absorbance detection with on-line sample preconcentration techniques

The World Health Organization (WHO) guideline states that the total arsenic concentration in drinking water must not exceed 10 ppb. However, arsenic toxicity varies significantly, with inorganic arsenic species being more toxic than organic species. Arsenic speciation is therefore important for evaluating the health risks from arsenic-contaminated drinking water. Capillary electrophoresis provides the necessary high performance separation to determine arsenic species in water, but its sensitivity with absorbance detection is far below than needed. Using a coated capillary, several on-line sample preconcentration techniques such as large volume sample stacking with an electroosmotic flow pump, field amplified sample injection (FASI), transient isotachophoresis (tITP), electrokinetic supercharging (EKS) combining FASI and tITP, and counter flow (CF)-EKS, were therefore investigated. With CF-EKS using phosphate and N-cyclohexyl-2-aminoethanesulfonate as leading and terminating electrolytes, respectively, standard samples of arsenite, arsenate, monomethylarsonic acid, and dimethylarsinic acid were preconcentrated from 6,300- to 45,000-fold. The limits of detection obtained with UV absorbance detection were 0.08-0.3 ppb As. For a spring water sample spiked with the four arsenic species, LODs of 2-9 ppb As were obtained, which are lower than the WHO guideline of 10 ppb total As.

Liquid phase microextraction based on the solidification of a floating ionic liquid combined with high-performance liquid chromatography for the preconcentration of phthalate esters in environmental waters and in bottled beverages

Liquid-phase microextraction based on the solidification of floating ionic liquids.

Development of molecularly imprinted electrochemical sensors based on Fe3O4@MWNT-COOH/CS nanocomposite layers for detecting traces of acephate and trichlorfon

In this study, we developed a novel biomimetic electrochemical sensor sensitized with a Fe3O4@carboxyl-functionalized multiwalled carbon nanotube/chitosan nanocomposite layer using a molecularly imprinted film as a recognition element for the rapid detection of acephate and trichlorfon. The performance of the imprinted sensor was investigated using cyclic voltammetry and differential pulse voltammetry, and the results indicated that the sensor exhibited fast responses to both acephate and trichlorfon. The imprinted sensor had good linear current responses to acephate and trichlorfon concentrations in the ranges from 1.0 × 10(-4) to 1.0 × 10(-10) M and 1.0 × 10(-5) to 1.0 × 10(-11) M, respectively. Under optimal conditions, the imprinted sensor had low limits of detection (signal to noise ratio, S/N = 3) of 6.81 × 10(-11) M for acephate and 8.94 × 10(-12) M for trichlorfon. The developed method was successfully applied to detect acephate and trichlorfon spiked in fortified kidney bean and cucumber samples with good recoveries ranging from 85.7% to 94.9% and relative standard deviations of 3.46-5.18%.

The breakthrough curve combination for xenon sampling dynamics in a carbon molecular sieve column

In the research of xenon sampling and xenon measurements, the xenon breakthrough curve plays a significant role in the xenon concentrating dynamics.