Multiple dual mode counter-current chromatography with variable duration of alternating phase elution steps

Comparison of two different multiple dual-mode counter-current chromatograph for separation of ketoconazole enantiomers

In this work, two different multiple dual-mode (MDM) counter-current chromatography methods, conventional MDM and modified MDM elution modes, were compared for the chiral separation of the ketoconazole enantiomers. The biphasic solvent system which consisted of n-hexane: isobutyl acetate: 0.1 mol/L phosphate buffer (2:4:6, v/v) (pH = 8.5) was employed as stationary phase and mobile phase. And the hydroxypropyl-β-cyclodextrin (HP-β-CD) with a concentration of 100 mmol/L was dissolved in the phosphate buffer, as the chiral selector. Under two different methods, dual-mode (DM) elution was performed to determine the time of the transformed phase roles and multiple cycles were performed to isolate ketoconazole, respectively. The result indicated that the modified MDM elution had a significant improvement on the separation, increasing the resolution from 0.51 to 1.19, while the resolution was increased from 0.40 to 0.79 by the conventional MDM elution. Ultimately, baseline separation of ketoconazole enantiomers was essentially achieved by high-speed counter-current chromatography under optimized modified MDM separation conditions. The final recoveries of the two enantiomers, R-(K) and S-(K), were 92.5 % and 83.3 %, respectively, corresponding to enantiomeric excess values of 99.0 % and 97.0 %, as determined by HPLC.

An overview of recent progress in multiple dual-mode counter-current chromatography

Counter-current chromatography is a chromatographic separation and purification technique being developed. The development of different elution modes has significantly contributed to this field. Multiple dual-mode elution is a method developed based on dual-mode elution, which consists of a series of changing cycles of the phase role and the direction by switching between normal and reverse elution modes of counter-current chromatography. This dual-mode elution method takes full advantage of the liquid nature of stationary and mobile phases of counter-current chromatography and effectively improves the separation efficiency. So, this unique elution mode has gained extensive attention for separating complex samples. This review mainly describes and summarizes in detail its development, applications, and characteristics in recent years. Meanwhile, its advantages, limitations, and future outlook also have been discussed in this paper.

Easy Computation of the Various Topologies and Modes of Liquid–Liquid Partition Chromatography by the Theory of Random Walks

The article revisits the discrete recurrence method to model the instruments of liquid–liquid partition chromatography as counter-current chromatography (CCC) and centrifugal partition chromatography (CPC). The purpose is to simplify the computation of the concentration profiles without supplementary approximations, rather by going back to the seminal model of binomial random walks, associated with the stochastic master equation that generates simple discrete recurrence relations. It fits the model of the prototype of liquid–liquid chromatography: the Craig’s apparatus. Three emblematic separation technique group cases are computed in batch injection, batch multiple dual mode (MDM), and continuous injection by the “True Moving Bed” (TMB) in CPC.

Analytical, Preparative, and Industrial-Scale Separation of Substances by Methods of Countercurrent Liquid-Liquid Chromatography

Countercurrent liquid-liquid chromatographic techniques (CCC), similar to solvent extraction, are based on the different distribution of compounds between two immiscible liquids and have been most widely used in natural product separations. Due to its high load capacity, low solvent consumption, the diversity of separation methods, and easy scale-up, CCC provides an attractive tool to obtain pure compounds in the analytical, preparative, and industrial-scale separations. This review focuses on the steady-state and non-steady-state CCC separations ranging from conventional CCC to more novel methods such as different modifications of dual mode, closed-loop recycling, and closed-loop recycling dual modes. The design and modeling of various embodiments of CCC separation processes have been described.

Operating mode and parameter selection in liquid-liquid chromatography

The presence of a liquid stationary phase in liquid-liquid chromatography (LLC) allows for high versatility of operation as well as adaptability to different sample types and separation tasks. LLC, also known as countercurrent chromatography (CCC) or centrifugal partition chromatography (CPC), offers the user a variety of operating modes, many of which have no direct equivalent in conventional preparative liquid-solid chromatography. These operating modes have the potential to greatly improve LLC separation performance compared to the standard "classical" isocratic batch injection mode, and they often require minimal to no addition of equipment to the standard set-up. However, reports of the use of alternative LLC operating modes make up only a fraction of the literature. This is likely due, at least in part, to the lack of clear guidelines and methods for operating mode and parameter selection, leaving alternative process options to be avoided and underutilized. This review seeks to remedy this by providing a thorough overview of the available LLC operating modes, identifying the key characteristics, advantages and disadvantages, and areas of application of each. Additionally, the equations and short-cut models aiding in operating mode and parameter selection are presented and critiqued, and their notation is unified for clarity. By rendering LLC and its alternative operating modes more accessible to current and prospective users, it is hoped to help expand the application of this technology and support the achievement of its full potential.

Modeling of closed-loop recycling dual-mode counter-current chromatography based on non-ideal recycling model

Closed-loop recycling dual-mode counter-current chromatography (CLR DM CCC) includes two separation stages: 1 - closed-loop recycling separation of solutes with mobile x-phase (CLR CCC); 2 - separation of solutes with the mobile y-phase in the opposite flow direction. Previous analysis of CLR DM CCC separations has been limited to the ideal recycling model, which neglects extra-column dispersion. In this study, the analysis of CLR CCC separations is based on the non-ideal recycling model, which takes into account the extra-column dispersion caused by the recycling system. This is of great practical importance, since by selecting the optimal parameters of the recycling system the separation can be significantly improved. Comparative analysis of CLR CCC and CLR DM CCC separations has shown that at low separations factors compounds with low partition coefficients can be separated by CLR CCC using recycling systems with a long recycling line; the separation of compounds with high partition coefficients and the separation of complex mixtures can be performed by CLR DM CCC. Simple equations for simulation and design of CLR DM CCC separations are developed. Several variants of the implementation of this separation method are discussed; examples of simulation are presented in "Mathcad" program.

An easy-to-use calculating machine to simulate steady state and non-steady-state preparative separations by multiple dual mode counter-current chromatography with semi-continuous loading of feed mixtures

Multiple dual mode counter-current chromatography (MDM CCC) separation processes with semi-continuous large sample loading consist of a succession of two counter-current steps: with "x" phase (first step) and "y" phase (second step) flow periods. A feed mixture dissolved in the "x" phase is continuously loaded into a CCC machine at the beginning of the first step of each cycle over a constant time with the volumetric rate equal to the flow rate of the pure "x" phase. An easy-to-use calculating machine is developed to simulate the chromatograms and the amounts of solutes eluted with the phases at each cycle for steady-state (the duration of the flow periods of the phases is kept constant for all the cycles) and non-steady-state (with variable duration of alternating phase elution steps) separations. Using the calculating machine, the separation of mixtures containing up to five components can be simulated and designed. Examples of the application of the calculating machine for the simulation of MDM CCC processes are discussed.

Trapping multiple dual mode centrifugal partition chromatography for the separation of intermediately-eluting components: Throughput maximization strategy

Trapping multiple dual mode centrifugal partition chromatography (trapping MDM CPC) is an alternative to isocratic pulse injections for the separation of intermediately-eluting components from complex mixtures using liquid-liquid chromatography. In this work, a throughput maximization strategy is developed and validated to investigate the full potential of trapping MDM CPC as a preparative technique. In the proposed approach, shake flask and stationary phase retention experiments are used to determine the maximum feed concentration and flow rate, respectively. A model-based parameter selection process combining a mathematical short-cut method and simulations based on the equilibrium cell model is used to obtain the column loading and step durations resulting in maximized process throughput. The proposed throughput maximization strategy is experimentally validated for the separation of a ternary model mixture of parabens. A preliminary comparison of trapping MDM CPC separation performance to that of stacked pulse injections is also made.

Modeling of closed-loop recycling liquid-liquid chromatography: Analytical solutions and model analysis

In closed-loop recycling (CLR) chromatography, the effluent from the outlet of a column is directly returned into the column through the sample feed line and continuously recycled until the required separation is reached. To select optimal operating conditions for the separation of a given feed mixture, an appropriate mathematical description of the process is required. This work is concerned with the analysis of models for the CLR separations. Due to the effect of counteracting mechanisms on separation of solutes, analytical solutions of the models could be helpful to understand and optimize chromatographic processes. The objective of this work was to develop analytical expressions to describe the CLR counter-current (liquid-liquid) chromatography (CCC). The equilibrium dispersion and cell models were used to describe the transport and separation of solutes inside a CLR CCC column. The Laplace transformation is applied to solve the model equations. Several possible CLR chromatography methods for the binary and complex mixture separations are simulated.

Multiple dual mode counter-current chromatography with periodic sample injection: Steady-state and non-steady-state operation

The multiple dual mode (MDM) counter-current chromatography (CCC) separation consists of a succession of two isocratic counter-current steps and is carried out in series alternating between normal phase and reversed phase operation. The performance of the MDM technique can be improved by the sample re-injection between each of the dual-mode steps. The objective of this work was to develop analytical expressions to describe the MDM CCC with periodic sample injection, which can be used to simulate these processes and select optimal operating conditions for the separation of a given feed mixture. Two possible methods of the MDM separation with periodic sample injection are considered: 1 - steady-state separation: the duration of the flow periods of the phases is kept constant for all the cycles and the steady-state regime is achieved after a certain number of cycles. 2 - non-steady-state separation with variable duration of phase elution steps. It is shown that proper selection of the duration of phase flow times allows to reach complete separation of solutes in continuous steady-state operation mode even in a low efficiency column. This mode of operation provides both high productivity and high resolution. The non-steady-state method with variable duration of phase elution steps offers several options to split a mixture into groups of compounds and/or concentrate target compounds.