A water resistant solid-phase microextraction fiber with high selectivity prepared by a metal organic framework with perfluorinated pores

A three-dimensional hierarchical porous graphene aerogel as a fiber coating for headspace solid-phase microextraction: Enhancing the enrichment and detection of polychlorinated naphthalenes in fish

In this study, a novel three-dimensional hierarchical porous deep eutectic solvents-modified graphene aerogel (3D DES-GA) was synthesized for use as a solid-phase microextraction (SPME) fiber coating. The SPME fiber was characterized by its fluffy and hierarchical porous structure, uniform thickness, and rapid mass transfer capabilities. This fiber demonstrated a lifetime (≥160 uses) and excellent precision (with relative standard deviations of 2.4-6.6% for single fiber and 6.0-9.8% for fiber-to-fiber repeatability). The SPME fiber also exhibited remarkable extraction performance for polycyclic aromatic hydrocarbons and polychlorinated biphenyls, which are common persistent organic pollutants in environmental samples. When combined with gas chromatography-tandem mass spectrometry, the method allowed for high-efficiency extraction (enrichment factors ranging from 1225 to 4652 folds) and sensitive determination (limit of detection ranging from 0.010 to 0.056 pg g-1) of polychlorinated naphthalenes (PCNs) in complex samples. To validate this method, we applied it to the determination of four PCNs in five types of fish tissues. The results revealed the presence of 1-chloronaphthalene at concentrations of 7.0 ± 2.9-34.8 ± 2.1 pg g-1 and 1,4-dichloronaphthalene at concentrations of 6.0 ± 0.3-10.9 ± 1.4 pg g-1 in three fish species. Compared with reported sample pretreatment methods reported in the literature, this proposed headspace SPME method offers additional advantages, including simplicity of operation and reduced sample and organic solvent consumption.

Novel solid-phase microextraction fiber coatings: A review

The materials used for the fabrication of solid-phase microextraction fiber coatings in the past five years are summarized in the current review, including carbon, metal-organic frameworks, covalent organic frameworks, aerogel, polymer, ionic liquids/poly (ionic liquids), metal oxides, and natural materials. The preparation approaches of different coatings, such as sol-gel technique, in-situ growth, electrodeposition, and glue methods, are briefly reviewed together with the evolution of the supporting substrates. In addition, the limitations of the current coatings and the future development directions of solid-phase microextraction are presented.

Sheathed in-situ room-temperature growth covalent organic framework solid-phase microextraction fiber for detecting ultratrace polybrominated diphenyl ethers from environmental samples

The extraction performance of solid-phase microextraction (SPME) fiber is significantly influenced by coating materials and fabricating process. It is urgently needed for fabricating robust SPME fiber with facile preparation methods. Herein, a novel polyimide (PI) @ covalent organic framework (COF) synthesized by 1,3,5-Tris (4-aminophenyl) benzene (TPB) and 2,5-dimethoxyterephthalaldehyde (DMTP) fiber, named PI@TPB-DMTP fiber, was successfully fabricated with facile method at room temperature. Firstly, a COF crystals TPB-DMTP was in situ grown on stainless steel fiber, where the COF crystals was synthesized by the Schiff-base reaction between TPB and DMTP. Subsequently, the COF coating was covered with an ultrathin layer of PI through a simple dip-coating method to improve the fiber stability. By coupled PI@TPB-DMTP SPME fiber with gas chromatography-negative chemical ion-mass spectrometry (GC-NCI-MS), a sensitive analytical method was established for the determination of ultratrace polybrominated diphenyl ethers (PBDEs) in water sample. To achieve the best efficiency and sensitivity for the analysis of PBDEs, six potential influencing factors in extraction step and desorption step were optimized. Under optimized conditions, the established method showed high enhancement factors of 1470-3555, wide linear range of 0.05-100 ng L^-1, low detection limits of 0.0083-0.0190 ng L^-1, good repeatability for intra-day in the range of 3.71%-7.62% and inter-day in the range of 5.12%-8.81%, good reproducibility in the range of 6.83%-9.21%. The satisfactory recovery was ranged from 79.2% to 117.3% in determining real water samples. The excellent experimental performance was mainly attributed to the large specific surface area of TPB-DMTP, as well as the high permeability of porous PI film. The results demonstrated that the COF-based fiber showed great potential for analysis of PBDEs in complex environmental samples.

The geometrical characteristics of nickel-based metal organic framework on its entrapment capability

Here, a three dimensional nickel-based metal organic framework (MOF) was synthesized via solvothermal and room temperature protocols. In order to study the effects of the synthesis conditions on the physical properties such as pore sizes and shapes of the prepared MOFs, their extraction capabilities were examined. Both MOFs were characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, scanning electron microscopy, Brunauer-Emmett-Teller and thermogravimetric analyses. Brilliant properties such as porous structure, high surface area and considerable thermal stability make them reasonable candidates to be employed as efficient extractive phases. The efficiency of the superior nickel-based MOF was evaluated for headspace needle trap extraction of chlorobenzenes as model compounds in conjunction with gas chromatography-mass spectrometry (GC-MS). The MOF-based extractive phase was conveniently packed in a needle trap device and after extraction, the desorption process was performed via direct insertion of needle into the GC inlet. After optimizing the extraction/desorption conditions, the figures of merit such as linear dynamic range was in the range of 5-1000 ng L^-1 (R² > 0.987) while the limits of detection and quantification values were 2-10 and 6-30 ng L^-1, respectively. The intra- and inter-day relative standard deviations for three replicates at the concentration level of 50 ng L^-1 were in the range of 7-9% and 9-12%, respectively. The needle-to-needle reproducibility was also found to be in the range of 5-11%. Acceptable relative recovery values at the concentration level of 50 ng L^-1 ranged from 85 to 96%, showing no significant matrix effect.

Metal–Organic Frameworks as Key Materials for Solid-Phase Microextraction Devices—A Review

Metal–organic frameworks (MOFs) have attracted recently considerable attention in analytical sample preparation, particularly when used as novel sorbent materials in solid-phase microextraction (SPME). MOFs are highly ordered porous crystalline structures, full of cavities. They are formed by inorganic centers (metal ion atoms or metal clusters) and organic linkers connected by covalent coordination bonds. Depending on the ratio of such precursors and the synthetic conditions, the characteristics of the resulting MOF vary significantly, thus drifting into a countless number of interesting materials with unique properties. Among astonishing features of MOFs, their high chemical and thermal stability, easy tuneability, simple synthesis, and impressive surface area (which is the highest known), are the most attractive characteristics that makes them outstanding materials in SPME. This review offers an overview on the current state of the use of MOFs in different SPME configurations, in all cases covering extraction devices coated with (or incorporating) MOFs, with particular emphases in their preparation.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.

Recent applications of metal-organic frameworks in sample pretreatment

Metal-organic frameworks are promising materials in diverse analytical applications especially in sample pretreatment by virtue of their diverse structure topology, tunable pore size, permanent nanoscale porosity, high surface area, and good thermostability. According to hydrostability, metal-organic frameworks are divided into moisture-sensitive and water-stable types. In the actual applications, both kinds of metal-organic frameworks are usually engineered into hybrid composites containing magnetite, silicon dioxide, graphene, or directly carbonized to metal-organic frameworks derived carbon. These metal-organic frameworks based materials show good extraction performance to environmental pollutants. This review provides a critical overview of the applications of metal-organic frameworks and their composites in sample pretreatment modes, that is, solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction, solid-phase microextraction, and stir bar solid extraction.

Metal-Organic Framework-Polymer Composite as a Highly Efficient Sorbent for Sulfonamide Adsorption and Desorption: Effect of Coordinatively Unsaturated Metal Site and Topology

In this study, we first demonstrated the effect of two types of metal-organic framework-polymer (MOF-polymer) monoliths on in-tube solid-phase microextraction (IT-SPME) of sulfonamides. Sulfonamides were successfully adsorbed onto MIL-101(Cr)-polymer but were difficult to elute due to these sulfonamides could interact via Lewis acid-base interaction with the presence of Cr(III) coordinatively unsaturated metal sites (CUS). Moreover, the cage-type topology of MIL-101(Cr) that could produce multiple pathways thus complicates the desorption of the test analytes from the sorbent. Contrastingly, MIL-53(Al)-polymer provided weaker Al(III) CUS, and its one-dimensional channel pore structure could provide an unhindered pathway for sulfonamides transfer during elution. After optimizing the IT-SPME condition such as MOF content, pH of sample matrix, column length, extraction flow rate, and elution volume, the calculated extraction recovery of sulfonamides in MIL-53(Al)-polymer as analyzed by microemulsion electrokinetic chromatography (MEEKC) were in the range of 40%-90% with relative standard deviations (RSDs) below 5% and a reusability of at least 30 times.