Laser desorption-ion mobility spectrometry as a useful tool for imaging of thin layer chromatography surface

Laser Desorption of Explosives from the Surface of Different Real-World Materials Studied Using C2Cl6-Dopant-Assisted Ion Mobility Spectrometry

A highly efficient and sensitive ion mobility spectrometry (IMS) system with laser desorption sampling was applied for rapid explosive detection using different surface materials. This portable IMS detector, powered by a battery, offers mobility and is suitable for use in the field or combat zones. The laser desorption (LD) sampling of common explosives (Trinitrotoluene-TNT; Dinitrotoluenes-DNTs; Hexogene-RDX; pentaerythritol tetranitrate-PETN; plastic explosives-Compound 4 (C-4) and Semtex) on a wide range of common surface materials, such as metal, ceramic, plastic, glass, drywall, paper, wood, and textiles, was studied. Successful detection was achieved on nearly all surfaces except flammable materials (paper, wood, and textiles). The limit of detection (LOD) was determined for each explosive and specific surface, demonstrating an impressive LOD of 7 ng/mm2 for TNT. RDX, C-4, PETN, and Semtex achieved LOD values of 15 ng/mm2, while DNTs showed an LOD of approximately 50 ng/mm2.

Analysis of positional isomers of 2-3-4-alkoxyphenylcarbamic acid derivatives by a combination of TLC and IMS

In this study, we have demonstrated a separation of positional isomers of some derivatives of alkoxyphenylcarbamic acid. These compounds belong to drugs with local anesthetics activity. The low volatility compounds were analysed by a Thin Layer Chromatography (TLC) and Ion Mobility Spectrometry (IMS) using diode laser desorption for sample introduction to IMS. This combined approach allowed the identification of compounds. Also, we have carried out IMS studies of all compounds and determined their ion mobilities The ion mobilities were increasing with the geometry change from position ortho to para of alkoxy chain, which is in agreement with their different collision cross section (CCS).

Low-Temperature Plasma Probe Mass Spectrometry for Analytes Separated on Thin-Layer Chromatography Plates: Direct vs Laser Assisted Desorption

Thin-layer chromatography (TLC) is a widespread technique because it allows fast, simple, and inexpensive analyte separations. In addition, direct analysis of the compounds separated on TLC plates via mass spectrometry (MS) has been shown to provide high sensitivity and selectivity while avoiding time-consuming sample extraction protocols. Here, direct desorption low-temperature plasma-mass spectrometry (LTP-MS) as well as diode laser assisted desorption (LD) LTP-MS are studied for direct spatially resolved analysis of compounds from TLC plates. Qualitative and quantitative characterization of amino acids, pharmaceuticals, and structural isomers were performed. The nature of the TLC plate stationary phase was found to have a significant influence, together with the analyte's characteristics, on the desorption efficiency. Tandem MS is shown to greatly improve the limits of detection (LODs). Direct desorption LTP-MS, without external thermal assisted desorption, demonstrates its best performance with cellulose TLC plates (LODs, 0.01 ng/mm² to 2.55 ng/mm²) and restricted performance with normal-phase (NP) TLC plates (several analytes without observable signal). LD LTP-MS, with systematic optimization of irradiance and focal point diameter, is shown to overcome the direct-desorption limitations and reach significantly improved LODs with NP TLC plates (up to ×1000 better). In addition, a wide-ranging characterization of amino acid analytical figures of merit with LD LTP-MS shows that LODs from 84 pg/mm² down to 0.3 pg/mm² are achieved on NP TLC plates.