A system map for the ionic liquid stationary phase 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide trifluoromethanesulfonate for gas chromatography

Determination of solvation parameter model compound descriptors by gas chromatography

The solvation parameter model uses five system independent descriptors to characterize compound properties defined as excess molar refraction, E, dipolarity/polarizability, S, hydrogen-bond acidity, A, hydrogen-bond basicity, B, and the gas-liquid partition constant at 25 °C on n-hexadecane, L, to model transfer properties in gas-condensed phase biphasic systems. The E descriptor for compounds liquid at 20 °C is available by calculation using a refractive index value while E for solid compounds at 20 °C and the S, A, B, and L descriptors are determined by experiment. As a single-technique approach, it is shown that with up to 20 retention factor measurements on four columns comprising a poly(siloxane) containing methyloctyl or dimethyldiphenylsiloxane monomers (SPB-Octyl or HP-5), a poly(siloxane) containing methyltrifluoropropylsiloxane monomers (Rtx-OPP or DB-210), a poly(siloxane) containing bis(cyanopropylsiloxane) monomers (HP-88 or SGE BPX-90), and a poly(ethylene glycol) stationary phase (DB-WAXetr or HP-INNOWAX) are suitable for assigning the S, A, and L descriptors. Using the descriptors in the updated WSU compound descriptor database as target values the average absolute error in the descriptor assignments for 52 varied compounds in the temperature range 60-140 °C was 0.072 for E, 0.016 for S, 0.008 for A, and 0.022 for L corresponding to 30 %, 3.5 %, and 0.6 % as a relative average absolute error for E, S, and L, respectively. For the higher temperature range of 160-240 °C and 34 varied compounds that are liquid at 20 °C the average absolute error for the S, A and L descriptors was 0.026, 0.020, and 0.031, respectively, with the largest relative average absolute error for S of 3.2 % (< 1 % for the L descriptor). For 35 varied compounds that are solid at 20 °C the relative absolute error for the E, S, A, and L descriptors in the higher temperature range was 0.068, 0.035, 0.020, and 0.020, respectively, with a relative average absolute error for E (6.5 %), S (3.5 %) and L (0.88 %). The S, A, and L descriptor can be accurately assigned on the four-column system over a wide temperature range. The E descriptor for solid compounds at 20 °C exhibits greater variability than desirable. The B descriptor cannot be assigned by the four-column system, which lack hydrogen-bond acid functional groups, and is only poorly assigned on the weak hydrogen-bond acid ionic liquid column SLB-IL100.

Revised descriptors for polycyclic aromatic and related hydrocarbons for the prediction of environmental properties using the solvation parameter model

Revised descriptors for twenty-five polycyclic aromatic and related hydrocarbons (PAHs) forming a component of the Wayne State University (WSU) descriptor database are provided for use with the solvation parameter model. The descriptors are determined by the Solver method using experimental data for calibrated gas-liquid and reversed-phase liquid chromatographic retention factors and liquid-liquid partition constants in totally organic biphasic systems. The characteristic solvation properties of the PAHs are accounted for mainly by the additional dispersion interactions (E descriptor) and dipole-type interactions (S descriptor) resulting from the availability of easily polarizable electrons that complement typical dispersion interactions for saturated hydrocarbons. The descriptors afford acceptable prediction of the water-air partition constant (average absolute deviation AAD = 0.17, n = 22), octanol-air partition constant (AAD = 0.12, n = 20), and water-octanol partition constant (AAD = 0.10, n = 23). A two-parameter model containing only the V and B descriptors provides an unbiased prediction of aqueous solubility for the PAHs with an AAD = 0.26 (n = 22). The descriptors estimated by convenient chromatographic and partition constant measurements are demonstrated to be a viable alternative to the experimental determination of environmental properties otherwise only available by tedious, expensive, and low data throughput experimental techniques.

The effect of the assigned descriptors for phthalate esters on the characterization of their separation properties using the solvation parameter model

Revised descriptors are determined for fifteen phthalate esters for use in the solvation parameter model and form part of the Wayne State University (WSU) compound descriptor database. For thirteen phthalate esters a comparison is made with the same compounds in the Abraham descriptor database. Gas chromatographic retention factors on poly(methyloctylsiloxane), SPB-Octyl, and poly(cyanopropylphenyldimethylsiloxane), DB-225, stationary phases are used to facilitate an assessment of the contribution of cavity formation and dispersion interactions, L descriptor, and dipole-type interactions, S descriptor, to the experimental retention factors (log k) for the phthalate esters with minimum interference from competing intermolecular interactions. The results indicate a systematic overprediction of the cavity and dispersion interaction term and underprediction of dipole-type interactions for the Abraham descriptors compared with the WSU descriptors for the phthalate esters. The average absolute deviation (AAD) for 13 phthalate esters on SPB-Octyl is 0.039 (WSU descriptors) compared with 0.252 (Abraham descriptors) and for 9 phthalate esters on DB-225 0.030 (WSU descriptors) compared with 0.167 (Abraham descriptors). The results for dipole-type interactions are confirmed and extended to include the hydrogen-bond basicity of the phthalate esters, B descriptor, by evaluation of partition constants in aqueous biphasic systems and the n-heptane-2,2,2-trifluoroethanol biphasic system. Differences in the contribution of the hydrogen-bond basicity of the phthalate esters to the experimental partition constants are largely random with respect to database selection but important for the accurate prediction of the partition constants. The AAD for the partition constant for 15 phthalate esters is 0.063 (WSU descriptors) compared with 0.320 (Abraham descriptors) for the heptane-2,2,2-trifluoroethanol biphasic system and 0.13 (WSU descriptors) compared with 0.25 (Abraham descriptors) for 9 phthalate esters in the octanol-water biphasic system. The WSU descriptors for the phthalate esters exhibit a better fit with the experimental data for separation systems and are free of the extreme values predicted for the Abraham descriptors for several phthalate esters.

Regulation of hydrogen bond acidity and its effect on separation performances

Ionic liquid bonded polysiloxanes (PILs) are a class of polysiloxanes whose side chains contain ionic liquid (IL) moieties. They not only inherit the character of "dual nature" from ILs but also inherit the excellent film-forming ability and thermal stability from polysiloxanes. In this paper, the solvation parameter model is introduced to investigate the interaction characteristics of PILs. The experimental results show that the b values of PILs occur in a wider range than those previously reported for the stationary phases. The hydrogen bond acidity can be effectively adjusted by varying the ionic liquid content or substituents. Hindering the formation of the hydrogen-bonded networks and increasing the exposed hydrogens may be intrinsic to the strong hydrogen bond acidity of PILs. Subsequently, the separation performances of these PIL stationary phases were demonstrated by separating various mixed samples of aromatic isomers, dichloroanilines, substituted alkanes, alcohols, esters, etc. The results show that the PILs with strong hydrogen bond acidity have excellent selectivity performances for aromatic position isomers, alcohols, and substituted alkanes. This study is significant for understanding the hydrogen bond acidity and broadening the range of hydrogen bond acidity of ionic liquid stationary phases.

Determination of physicochemical properties of ionic liquids by gas chromatography

Over the years room temperature ionic liquids have gained attention as solvents with favorable environmental and technical features. Both chromatographic and conventional methods afford suitable tools for the study of their physicochemical properties. Use of gas chromatography compared to conventional methods for the measurement of physicochemical properties of ionic liquids have several advantages; very low sample concentrations, high accuracy, faster measurements, use of wider temperature range and the possibility to determine physicochemical properties of impure samples. Also, general purpose gas chromatography instruments are widely available in most laboratories thus alleviating the need to purchase more specific instruments for less common physiochemical measurements. Some of the main types of physicochemical properties of ionic liquids accessible using gas chromatography include gas-liquid partition constants, infinite dilution activity coefficients, partial molar quantities, solubility parameters, system constants of the solvation parameter model, thermal stability, transport properties, and catalytic and other surface properties.

Ionic liquids as stationary phases for fatty acid analysis by gas chromatography

The present paper provides an overview of the application of ionic liquid (IL) columns for GC analysis of fatty acid methyl esters (FAMEs).