Poly(glycidyl methacrylate) nanoparticle-coated capillary with oriented antibody immobilization for immunoaffinity in-tube solid phase microextraction: Preparation and characterization

Nanobody-functionalized conduit with built-in static mixer for specific elimination of cytokines in hemoperfusion

Removing excessively produced cytokines is of paramount significance in blood purification therapy for hypercytokinemia-associated diseases. In this study, we devised a conduit that is modified with nanobodies (Nb) and incorporates static mixers (Nb-SMC) to eliminate surplus cytokines from the bloodstream. The low-pressure-drop (LPD) static mixer, with each unit featuring two 90°-crossed blades, was strategically arranged in a tessellated pattern on the inner wall of the conduit to induce turbulent mixing effects during the flow of blood. This arrangement enhances mass transfer and molecular diffusion, thereby assisting in the identification and elimination of cytokines. By utilizing computational fluid dynamics (CFD) studies, the Nb-SMC was rationally designed and prepared, ensuring an optimal interval between two mixer units (H/G = 2.5). The resulting Nb-SMC exhibited a remarkable selective clearance of IL-17A, reaching up to 85 %. Additionally, the process of Nb immobilization could be adjusted to achieve the simultaneous removal of multiple cytokines from the bloodstream. Notably, our Nb-SMC displayed good blood compatibility without potential adverse effects on the composition of human blood. As the sole documented static mixer-integrated conduit capable of selectively eliminating cytokines at their physiological concentrations, it holds promise in the clinical potential for hypercytokinemia in high-risk patients. STATEMENT OF SIGNIFICANCE: High-efficient cytokines removal in critical care still remains a challenge. The conduit technique we proposed here is a brand-new strategy for cytokines removal in blood purification therapy. On the one hand, nanobody endows the conduit with specific recognition of cytokine, on the other hand, the build-in static mixer enhances the diffusion of antigenic cytokine to the ligand. The combination of these two has jointly achieved the efficient and specific removal of cytokine. This innovative material is the only reported artificial biomaterial capable of selectively eliminating multiple cytokines under conditions close to clinical practice. It has the potential to improve outcomes for patients with hypercytokinemia and reduce the risk of adverse events associated with current treatment modalities.

Nanobody-loaded immunosorbent for highly-specific removal of interleukin-17A from blood

Elimination of overproduced cytokines from blood can relieve immune system disorders caused by hypercytokinemia. Due to the central roles of interleukin-17A (IL-17A) plays in regulating the immunity and inflammatory responses in humans, here, a novel immunosorbent containing anti-IL-17A nanobodies (Nbs) was constructed for IL-17A removal from blood. The theoretical maximum adsorption capacity estimated from the Langmuir isotherm is up to 11.55 mg/g gel, which is almost consistent with the saturated adsorption capacity determined in dynamic adsorption. The in vitro plasma perfusion test demonstrated a remarkable adsorptive performance of the Nb-coupled sorbent since more than 75% IL-17A could be eliminated under the plasma/sorbent ratio of 1000:1. These results indicated the Nb-loaded immunosorbent can provide a simple and economic platform technology for immunoaffinity depletion of single or even multiple cytokines from plasma.

Advances and applications of in-tube solid-phase microextraction for analysis of proteins

In-tube solid-phase microextraction (IT-SPME) with capillary column as extraction device is a well-established green extraction technique with a lot of applications in the fields of biomedicine, food and environment. This article reviews the research contributions of IT-SPME for analysis of proteins. The paper first briefly describes the history of IT-SPME. Then, the development and principle of IT-SPME for analysis of proteins are introduced, in which capillary column configurations of IT-SPME and instruments for quantitative analysis of proteins are summarized. Subsequently, the synthesis strategy and recognition principle of different recognition units, including antibodies, aptamers, molecularly imprinted polymers, and boronate affinity materials, are discussed in detail. This part also introduces several rare recognition units, including lectins, restricted access materials, lysine modified with β-cyclodextrin and cell membrane. The development trend and possible future direction of IT-SPME for analysis of proteins are mentioned.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Bioanalytical HPLC Applications of In-Tube Solid Phase Microextraction: A Two-Decade Overview

In-tube solid phase microextraction is a cutting-edge sample treatment technique offering significant advantages in terms of miniaturization, green character, automation, and preconcentration prior to analysis. During the past years, there has been a considerable increase in the reported publications, as well as in the research groups focusing their activities on this technique. In the present review article, HPLC bioanalytical applications of in-tube SPME are discussed, covering a wide time frame of twenty years of research reports. Instrumental aspects towards the coupling of in-tube SPME and HPLC are also discussed, and detailed information on materials/coatings and applications in biological samples are provided.

Preparation and application of immunoaffinity in-tube solid phase microextraction column with oriented antibody-immobilized porous layer open tubular capillary for high sensitive quantification of serum extracellular domain of human epidermal growth factor receptor 2 levels

Human epidermal growth factor receptor 2 (HER2) gene expresses a transmembrane glycoprotein that is over-expressed in 15-30% breast, 3% lung, and other several digestive cancers. So HER2 is a good biomarker for tumor diagnostic and treatment monitoring. Clinically, detection of HER2 often employs invasive approaches with tissue samples, which at large extent limit its universal application. Shedding of the extracellular domain (ECD) of the HER2 (HER2-ECD) into the circulation has led to the development of a serum test of HER2-ECD as an additional approach to probe the HER2 overexpression. However, few methods were developed due to the high sensitivity required by the serum HER2-ECD determination. In this work, we prepared a novel immunoaffinity in-tube solid phase microextraction (IT-SPME) sorbent for selective enrichment of HER2-ECD. Two clinical available monoclonal antibodies against to HER2, trastuzumab and pertuzumab, were selected as immunoaffinity ligands. Porous layer open tubular capillary with oriented antibody immobilization were fabricated and systematically optimized to afford a higher extraction capacity. The capacity was reached to 120.4 μg/m, which is more than 1000 times higher than that obtained by a common method (directly antibody immobilization on a naked capillary). After sample extraction and enrichment by the IT-SPME, the eluent were determined by a particle-enhanced turbidimetric immunoassay (PETIA). Sensitive quantification of HER2-ECD by the PETIA was thereby accomplished. HER2-ECD concentrations in 82 clinical serum samples were determined by the developed IT-SPME/PETIA method, and the results were well-correlated with that by the clinical used chemiluminescence immunoassay (CLIA). Besides, the IT-SPME/PETIA method was found providing 5 times higher sensitivity than the CLIA, and 500 times higher than the PETIA without IT-SPME. The results indicate that the developed method is suitable for high-sensitive quantification of HER2-ECD in clinical samples.

Peroxidase-like activity of magnetic poly(glycidyl methacrylate-co-ethylene dimethacrylate) particles

Poly(glycidyl methacrylate) (PGMA) is prone to modifications with different functional groups, magnetic fluids or direct coupling with biological molecules. The purpose of this research was to synthesize new magnetically responsive particles with peroxidase-like activity. Poly(glycidyl methacrylate-co-ethylene dimethacrylate) [P(GMA-EDMA)] particles containing carboxyl groups were obtained by emulsifier-free emulsion polymerization and hydrolysis and oxidation of PGMA with KMnO4, resulting in poly(carboxymethyl methacrylate-co-ethylene dimethacrylate) [P(CMMA-EDMA)] particles. Thionine (Th) was also attached to the particles [(P(CMMA-EDMA)-Th] via EDC/NHS chemistry to observe its effect on electron transfer during the oxidation reaction. Finally, the particles were coated with a nitric acid-stabilized ferrofluid in methanol. The resulting magnetic particles were characterized by several methods, including scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. The effect of EDMA on the P(CMMA-EDMA) particle size and size distribution was investigated; the particle size changed from 300 to 340 nm, and the particles were monodispersed with a saturation magnetization of 11 Am2/kg. Finally, the effects of temperature and pH on the peroxidase-like activity of the magnetic P(CMMA-EDMA) and P(CMMA-EDMA)-Th particles were investigated. The particles, which exhibited a high activity at pH 4-6 and at ∼37 °C, represent a highly sensitive sensor component potentially useful in enzyme-based immunoassays.

Novel approaches for biomolecule immobilization in microscale systems

This manuscript reviews novel approaches applied for biomolecule immobilization in microscale systems.