Argentation gas chromatography revisited: Separation of light olefin/paraffin mixtures using silver-based ionic liquid stationary phases

Comparing π-complexation capabilities of ionic liquids containing silver(I) and copper(I) ions by headspace single drop microextraction in combination with high-performance liquid chromatography

Selective π-complexation capabilities of silver(I) and copper(I) ions can be effectively facilitated in ionic liquids. To understand the effects of environmental factors that influence the π-complexation of these metal ions with analytes, techniques that employ small volumes of ionic liquid that can be readily analyzed are desired. In this study, headspace single drop microextraction coupled with HPLC is used to investigate a diverse set of environmental factors on the metal ion-mediated complexation with aromatic compounds in ionic liquid media. Silver(I) and copper(I) bis[(trifluoromethyl)sulfonyl]imide salts were both studied by dissolving them in the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ionic liquid and employing the mixture as extraction media for aromatic compounds. Water and acetonitrile within the sample solution were observed to interfere with the complexation of silver(I) ions and aromatic compounds, while ethylene glycol and triethylene glycol did not. The temperature and extraction times were optimized to fully facilitate the π-complexation capabilities of metal ions in ionic liquid media. Partition coefficients between the sample headspace and metal ion were determined using a three-phase equilibria model. Although no discernable difference in analyte partitioning between the headspace and ionic liquid solvent was observed, analyte partition coefficients to silver(I) ion tended to be greater compared to copper(I) ion.

Selective Characterization of Olefins by Paternò-Büchi Reaction with Ultrahigh Resolution Mass Spectrometry

Petroleum olefins play important roles in various secondary processing procedures and are important feedstocks for the modern organic chemical industry. It is quite challenging to analyze petroleum olefins beyond the gas chromatography (GC)-able range using mass spectrometry (MS) due to the difficulty of soft ionization and the matrix complexity. In this work, a Paternò-Büchi (PB) reaction combined with atmospheric pressure chemical ionization and ultrahigh resolution mass spectrometry (APCI-UHRMS) was developed for selective analysis of olefins. Through the PB reaction, C═C bonds were transformed into four-membered rings of oxetane with improved polarity so that soft ionization of olefins could be achieved. The systematic optimization of PB reaction conditions, as well as MS ionization conditions, ensured a high reaction yield and a satisfied MS response. Furthermore, a sound scheme was set up to discriminate the coexisting unsaturated alkanes in complex petroleum, including linear olefins, nonlinear olefins, cycloalkanes, and aromatics, making use of their different behaviors during the PB reaction and chemical ionization. The developed strategy was successfully applied to the analysis of olefins in fluid catalytic cracking oil slurry, a complex heavy oil sample. This method extended the characterization of petroleum olefins from lower to higher with high efficiency and selectivity to provide a comprehensive molecular library for heavy petroleum samples and process optimization.

Silver-mediated separations: A comprehensive review on advancements of argentation chromatography, facilitated transport membranes, and solid-phase extraction techniques and their applications

The use of silver(I) ions in chemical separations, also known as argentation separations, is a powerful approach for the selective separation and analysis of many natural and synthetic organic compounds. In this review, a comprehensive discussion of the most common argentation separation techniques, including argentation-liquid chromatography (Ag-LC), argentation-gas chromatography (Ag-GC), argentation-facilitated transport membranes (Ag-FTMs), and argentation-solid phase extraction (Ag-SPE) is provided. For each of these techniques, notable advancements, optimized separations, and innovative applications are discussed. The review begins with an explanation of the fundamental chemistry underlying argentation separations, mainly the reversible π-complexation between silver(I) ions and carbon-carbon double bonds. Within Ag-LC, the use of silver(I) ions in thin-layer chromatography, high-performance liquid chromatography, as well as preparative LC are explored. This discussion focuses on how silver(I) ions are employed in the stationary and mobile phase to separate unsaturated compounds. For Ag-GC and Ag-FTMs, different silver compounds and supporting media are discussed, often with relation to olefin-paraffin separations. Ag-SPE has been widely employed for the selective extraction of unsaturated compounds from complex matrices in sample preparation. This comprehensive review of Ag-LC, Ag-GC, Ag-FTMs, and Ag-SPE techniques emphasizes the immense potential of argentation separations in separations science and serves as a valuable resource for researchers seeking to learn, optimize, and utilize argentation separations.

Comparison of olefin/paraffin separation by ionic liquid and polymeric ionic liquid stationary phases containing silver(I) ion using one-dimensional and multidimensional gas chromatography

Silver(I) ions have been used in various studies as components within polymer membranes or ionic liquids (ILs) to enable separation of olefins from paraffins. Polymeric ionic liquids (PILs) are a class of polymers synthesized from IL monomers and typically possess higher thermal and chemical stability than the ILs from which they are formed. Until now, very little is known about the difference in strength of silver(I) ion-olefin interactions when they take place in an IL compared to a PIL. In this work, the chromatographic separation of olefins by stationary phases composed of silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag⁺][NTf₂^-]) incorporated into the 1-hexyl-3-methylimidazolium NTf₂ ([HMIM⁺][NTf₂^-]) IL and poly(1-hexyl-3-vinylimidazolium NTf₂) (poly([HVIM⁺][NTf₂^-])) PIL at varying concentrations was investigated. Olefins were more highly retained by silver(I) ions in PILs than in ILs as the silver(I) salt concentration in the stationary was increased. The potential separation power of silver(I)-containing IL and PIL stationary phases in comprehensive two-dimensional gas chromatography (GC×GC) was compared to the conventional one-dimensional system. The separation selectivity of alkenes and alkynes from paraffins was significantly increased, while dienes and aromatic compounds showed insignificant changes in retention. The chemical structural features of IL and PIL that enhance silver(I) ion stability and olefin separation were investigated by using silver(I) trifluoromethanesulfonate ([Ag⁺][OTf^-]), 1-decyl-3-methylimidazolium NTf₂ ([DMIM⁺][NTf₂^-]) IL, poly(1-decyl-3-vinylimidazolium NTf₂ (poly([DVIM⁺][NTf₂^-])) PIL, [HMIM⁺][OTf^-] IL and poly([HVIM⁺][OTf^-]) PIL. Longer alkyl substituents appended to the IL (and PIL) cation increased the strength of silver(I) olefin interaction, and [OTf^-] anions in the IL (and PIL) tended to preserve silver(I) ion from thermal reduction, while also retaining olefins less than the [NTf₂^-]-containing columns. In general, silver(I) ions in PILs possessing analogous chemical structures to ILs exhibited higher silver(I) ion-olefin interaction strength but were less thermally stable.

Deconvoluting the Combined Effects of Gas Composition and Temperature on Olefin Selectivity for Separations Using Silver(I) Ions in Ionic Liquids

Silver(I) ions have the propensity of undergoing reduction to form metallic silver within olefin/paraffin separation systems when they are subjected to hydrogen at elevated temperatures. Ionic liquids (ILs) are versatile solvents known for their low vapor pressure, high thermal stability, and structural tunability and have been shown to minimize hydrogen-induced reduction of silver(I) ions when employed as solvents. In the development of robust separation platforms that employ silver(I) ions, it is essential to deploy reliable approaches capable of measuring and assessing the factors that lower the overall separation performance. In this study, silver(I) ions dissolved in an imidazolium-based IL are subjected to mixed gas streams composed of hydrogen, nitrogen, and methane under varying temperatures. Using inverse gas chromatography, a total of 44 columns with stationary phases containing four different concentrations of silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag⁺][NTf₂ ^-]) dissolved in the 1-decyl-3-methylimidazolium ([C₁₀MIM⁺]) [NTf₂ ^-] IL were used to measure partition coefficients of olefins and paraffins, as well as aromatics, esters, and ketones. Upon exposing the stationary phases to mixed gases at elevated temperatures, olefin partitioning between the silver(I) ion pseudophase and the two other phases (i.e., carrier gas and IL stationary phase) was observed to decrease over time, while partitioning between the IL stationary phase and carrier gas remained unchanged. It was found that exposure gases composed of 5.0 to 85.0 mol % hydrogen and temperatures ranging from 95 to 130 °C resulted in a remarkable acceleration of silver(I) ion reduction and an approximate 36.4-61.3% decrease in olefin partitioning between the silver(I) ion pseudophase and both the carrier gas and IL stationary phase after 60 h. While binary mixtures of hydrogen and nitrogen resulted in a continuous decrease in silver(I) ion-olefin complexation capability, a ternary gas mixture produced varied silver(I) ion reduction kinetics.

Effect of silver(I) ion reduction on the selectivity of olefins, paraffins, and aromatic compounds by gas chromatographic stationary phases consisting of silver(I) salts in ionic liquids

The olefin/paraffin selectivity offered by ionic liquid (IL) stationary phases can be enhanced through the addition of silver(I) ion, which is well-known to undergo selective complexation with unsaturated compounds. However, such stationary phases often suffer from the loss of chromatographic selectivity as silver(I) ion can be reduced to elemental silver. To maintain the separation performance of silver(I) ion/IL stationary phases, an understanding of factors and conditions that promote the reduction of silver(I) ion is needed. In this study, capillary gas chromatography columns featuring a stationary phase consisting of the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C₁₀MIM⁺][NTf₂^-]) IL impregnated with [Ag⁺][NTf₂^-] were examined to investigate the effects of temperature, hydrogen content in exposure gas stream, and time of heating/exposure events on olefin selectivity. Retention factors of representative analytes, such as C₆ olefins and paraffins as well as aromatic compounds, were measured after subjecting the columns to the aforementioned conditions, followed by an evaluation of selectivity factors over time. Selectivity factors of olefins and aromatic compounds were observed to decrease significantly when the stationary phases were heated to temperatures higher than 110°C as well as being subjected to mixed gas streams containing greater than 50 mol% of hydrogen. As constant column heating temperatures were applied under exposure gas mixtures containing hydrogen and nitrogen, a gradual decrease in analyte selectivity factors was observed under prolonged periods of time. However, application of a ternary gas mixture comprised of 25/50/25 mol% hydrogen/nitrogen/methane resulted in an increase in the 3-hexyne/cis-2-hexene selectivity when measured at 120°C for 60 h, due to a smaller decrease in the retention factor of 3-hexyne compared to cis-2-hexene.

Recent progress in solid-state NMR of spin-½ low-γ nuclei applied to inorganic materials

Significant technological and methodological advances in solid-state NMR techniques in recent years have increased the accessibility of nuclei with small magnetic moments (hereafter termed low-γ) underpinning an increased range of applications of such nuclei. These methodological advances are briefly summarised, including improvements in hardware and pulse sequences, as well as important developments in associated computational methods (e.g. first principles calculations, spectral simulation). Here spin-½ nuclei are the focus, with this Perspective complementing a very recent review that looked at half-integer spin low-γ quadrupolar nuclei. Reference is made to some of the original reports of such spin-½ nuclei, but recent progress in the relevant methodology and applications to inorganic materials (most within the last 10 years) of these nuclei are the focus. An overview of the current state-of-the-art of studying these nuclei is thereby provided for both NMR spectroscopists and materials researchers.

Sulfolane as a novel stationary phase for analytical separations by gas chromatography

Sulfolane is explored as a novel stationary phase for use in analytical separations by capillary column gas chromatography with flame ionization detection (GC-FID). Stainless steel capillaries were found to provide a good substrate for coating and retaining a sulfolane phase, whereas fused silica tubing did not perform well for this. In general, the phase was found to be stable for several hours of use when using elevated carrier gas pressures (90 psi) and a small restriction (25 μm I.D. tubing) at the outlet. This normally provided good performance at temperatures up to about 200 °C with very little background interference in the FID. Given its separation properties, a short 2 m × 100 μm I.D. column was found to be preferable for most separations in this study. Measurements indicated the coating procedure yielded a sulfolane film near 4 μm thick on this column, which produced 4400 plates for benzene with a sample capacity near 30 μg. The sulfolane phase yielded good retention and peak shape for many analytes including alkanes, aromatics, alcohols, bases, sulfides, phosphites, thiols, and others. Compared to longer conventional GC columns, the relatively short sulfolane column was found to offer improved selectivity in the separation of unsaturated, aromatic, and alkane test analytes. As such the method was successfully applied to the analysis of aromatics in gasoline headspace. Results suggest that sulfolane could be a potentially useful stationary phase to further explore in GC separations.

Using a Chromatographic Pseudophase Model To Elucidate the Mechanism of Olefin Separation by Silver(I) Ions in Ionic Liquids

Silver(I) ions undergo selective olefin complexation and have been utilized in various olefin/paraffin separation techniques such as argentation chromatography and facilitated transport membranes. Ionic liquids (ILs) are solvents known for their low vapor pressure, high thermal stability, low melting points, and ability to promote a favorable solvation environment for silver(I) ion-olefin interactions. To develop highly selective separation systems, a fundamental understanding of analyte partitioning to the stationary phase and the thermodynamic driving forces behind solvation is required. In this study, a chromatographic model treating silver(I) ions as a pseudophase is constructed and employed for the first time to investigate the olefin separation mechanism in silver(I) salt/IL mixtures. Stationary phases containing varying amounts of noncoordinated silver(I) salt ([Ag⁺][NTf₂^-]) dissolved in the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C₁₀MIM⁺][NTf₂^-]) IL are utilized to determine the partition coefficients of various analytes including alkanes, alkenes, alkynes, aromatics, aldehyde, esters, and ketones. As ligand coordination to silver(I) ions is known to lower its olefin complexation capability, this study also examines two different types of coordinated silver(I) ion pseudophases, namely, monocoordinated silver(I) salt ([Ag⁺(1-decyl-2-methylimidazole, DMIM)][NTf₂^-]) and dicoordinated silver(I) salt ([Ag⁺(1-methylimidazole, MIM)(DMIM)][NTf₂^-]). The extent of olefin partitioning to the coordinated silver(I) ion pseudophases over the carrier gas and IL decreased by up to two orders of magnitude. Values for enthalpy, entropy, and free energy of solvation were determined for the three silver(I) ion-containing systems. Olefin retention was observed to be enthalpically dominated, while ligand coordination to the silver(I) ion pseudophase resulted in variations for both enthalpic and entropic contributions to the free energy of solvation. The developed model can be used to study chemical changes that occur in silver(I) ions over time as well as identify optimal silver(I) salt/IL mixtures that yield high olefin selectivity.

Ionic liquids as environmental hazards - Crucial data in view of future PBT and PMT assessment

Ionic liquids (ILs) constitute a large group of chemical compounds. They have gained much attention among scientists and industry due to their unique properties. Due to the fact that ILs are purely ionic compounds, there is the possibility to design an enormous number of cation and anion combinations, making them designer solvents. Thus it also creates the possibility of producing more environmentally benign solvents. However, significant drawbacks related mainly to their toxicity and persistence have already been noticed. Furthermore the interest in these compounds is constantly growing and their impact on the environment should be defined. More and more ILs are produced or imported in the amount higher than 10 tonnes per year and the group of ILs registered in REACH is still expanding. Thus for an increasing number of compounds, it will be necessary to perform a PBT and PMT assessment using the criteria described in REACH. Therefore the data collected in this work thoroughly sort out the information on the toxicity, bioconcentration/bioaccumulation, biodegradation and mobility of ILs in the context of PBT and PMT assessment.

Characterizing Olefin Selectivity and Stability of Silver Salts in Ionic Liquids Using Inverse Gas Chromatography

Separation systems utilizing silver(I) ion-olefin complexation have limitations since silver(I) ions can be poisoned or reduced to metallic silver. Ionic liquids (ILs) are used as solvents for silver(I) ions to facilitate separations since their physico-chemical properties can be easily tuned. To develop separation systems with sustainable olefin selectivity, factors that affect silver(I) ion stability need to be understood. In this study, a total of 13 silver salt/IL mixtures were examined by inverse gas chromatography to identify the effects of silver salt anion and IL cation/anion combination on silver(I) ion stability. The effects of temperature and three different exposure gases on silver(I) ion stability were systematically studied. Exposing silver salt/IL mixtures to hydrogen at high temperatures had a greater effect on decreasing silver(I) ion-olefin complexation. Silver(I) ions from the silver bis[(trifluoromethyl)sulfonyl]imide ([NTf₂ ^-]) salt were more stable in [NTf₂ ^-]-containing ILs than in [BF₄ ^-]-containing ILs. Optimum mixtures exhibited high olefin selectivity and were stable beyond 90 h when exposed to hydrogen gas.

Suppressing 1H Spin Diffusion in Fast MAS Proton Detected Heteronuclear Correlation Solid-State NMR Experiments

Fast magic angle spinning (MAS) and indirect detection by high gyromagnetic ratio (γ) nuclei such as proton or fluorine are increasingly utilized to obtain 2D heteronuclear correlation (HETCOR) solid-state NMR spectra of spin-1/2 nuclei by using cross polarization (CP) for coherence transfer. However, one major drawback of CP HETCOR pulse sequences is that ¹H spin diffusion during the back X→¹H CP transfer step may result in relayed correlations. This problem is particularly pronounced for the indirect detection of very low-γ nuclei such as ⁸⁹Y, ¹⁰³Rh, ¹⁰⁹Ag and ¹⁸³W where long contact times on the order of 10-30 ms are necessary for optimal CP transfer. Here we propose two methods that eliminate relayed correlations and allow more reliable distance information to be obtained from 2D HETCOR NMR spectra. The first method uses Lee-Goldburg (LG) CP during the X→¹H back-transfer step to suppress ¹H spin diffusion. We determine LG conditions compatible with fast MAS frequencies (ν_rot) of 40-95 kHz and show that ¹H spin diffusion can be efficiently suppressed at low effective radiofrequency (RF) fields (ν_1,eff ≪ 0.5ν_rot) and also at high effective RF fields (ν_1,eff ≫ 2ν_rot). We describe modified Hartmann-Hahn LG-CP match conditions compatible with fast MAS and suitable for indirect detection of moderate-γ nuclei such as ¹³C, and low-γ nuclei such as ⁸⁹Y. The second method uses D-RINEPT (dipolar refocused insensitive nuclei enhanced by polarization transfer) during the X→¹H back-transfer step of the HETCOR pulse sequence. The effectiveness of these methods for acquiring HETCOR spectra with reduced relayed signal intensities is demonstrated with ¹H{¹³C} HETCOR NMR experiments on l-histidine⋅HCl⋅H₂O and ¹H{⁸⁹Y} HETCOR NMR experiments on an organometallic yttrium complex.

Recent advances on ionic liquid uses in separation techniques

The molten organic salts with melting point below 100°C, commonly called ionic liquids (ILs) have found numerous uses in separation sciences due to their exceptional properties as non molecular solvents, namely, a negligible vapor pressure, a high thermal stability, and unique solvating properties due to polarity and their ionic character of molten salts. Other properties, such as viscosity, boiling point, water solubility, and electrochemical window, are adjustable playing with which anion is associated with which cation. This review focuses on recent development of the uses of ILs in separation techniques actualizing our 2008 article (same authors, J. Chromatogr. A, 1184 (2008) 6-18) focusing on alkyl methylimidazolium salts. These developments include the use of ILs in nuclear waste reprocessing, highly thermally stable ILs that allowed for the introduction of polar gas chromatography capillary columns able to work at temperature never seen before (passing 300°C), the use of ILs in liquid chromatography and capillary electrophoresis, and the introduction of tailor-made ILs for mass spectrometry detection of trace anions at the few femtogram level. The recently introduced deep eutectic solvents are not exactly ILs, they are related enough so that their properties and uses in countercurrent chromatography are presented.