Matrix-effect free quantitative liquid chromatography mass spectrometry analysis in complex matrices using nanoflow liquid chromatography with integrated emitter tip and high dilution factors

Dilute and shoot approach for toxicology testing

Toxicology testing is performed in clinical settings, forensic settings, and for controlling doping. Drug screening is a toxicology test to determine if drugs are present in biological samples. The most common specimen type for drug testing is urine, as drugs and/or their metabolites are often more concentrated in the urine, extending the detection window of drugs. The dilute-and-shoot method is a simple procedure used in toxicology testing, where a sample is diluted before being directly injected into the liquid chromatography-mass spectrometry (LC-MS) system. This method is easy, quick, and cost-saving, and can be used for protein-poor liquid specimens such as urine. Thus, it is reasonable and attractive for busy toxicology laboratories to combine the dilute-and-shoot method with high-resolution hyphenated-MS for urine drug screening. This method has several disadvantages, including a suboptimal detection capability for certain analytes, as well as interference from co-eluting matrix components called matrix effects, in which co-eluting matrix molecules alter the ionization efficiency of the analyte molecules at the ionization source in LC-MS, altering (mostly reducing) the analyte detection capability. The matrix effect testing is essential for the validation of LC-MS-based assays. A reasonable approach to addressing these undesirable effects would be to minimize these components. The most straightforward approach is to reduce the amounts of matrix components by using a higher dilution of the specimen and a lower volume for specimen injection. Optimization of the chromatographic separation is another reasonable approach for reducing co-eluting matrix components with the analyte.

Current Role of Mass Spectrometry in the Determination of Pesticide Residues in Food

The extensive use of pesticides represents a risk to human health. Consequently, legal frameworks have been established to ensure food safety, including control programs for pesticide residues. In this context, the performance of analytical methods acquires special relevance. Such methods are expected to be able to determine the largest number of compounds at trace concentration levels in complex food matrices, which represents a great analytical challenge. Technical advances in mass spectrometry (MS) have led to the development of more efficient analytical methods for the determination of pesticides. This review provides an overview of current analytical strategies applied in pesticide analysis, with a special focus on MS methods. Current targeted MS methods allow the simultaneous determination of hundreds of pesticides, whereas non-targeted MS methods are now applicable to the identification of pesticide metabolites and transformation products. New trends in pesticide analysis are also presented, including approaches for the simultaneous determination of pesticide residues and other food contaminants (i.e., mega-methods), or the recent application of techniques such as ion mobility–mass spectrometry (IM–MS) for this purpose.

Recent Applications of Nano-Liquid Chromatography in Food Safety and Environmental Monitoring: A Review

In recent years, a trend toward instrument miniaturization has led to the development of new and sophisticated analytical systems, such as nano-liquid chromatography (nano-LC), which has enabled improvements of sensitivity, as well as chromatographic resolution. The growing interest in nano-LC methodology has resulted in a variety of innovative and promising applications. In this article, we review the applications of nano-LC separation methods coupled with mass spectrometry in the analysis of food and environmental samples. An assessment of sample preparation methods and analytical performance are provided, along with comparison to other, more established analytical techniques. Three main groups of compounds that are crucial for food safety assessment are considered in this review: pharmaceuticals (including antibiotics), pesticides, and mycotoxins. Recent practical applications of the nano-LC method in the determination of these compounds are discussed. Furthermore, we also focus on methods for the determination of various environmental contaminants using nano-LC methods. Future perspectives for the development of nano-LC methods are discussed.

Qualitative screening and quantitative determination of multiclass water-soluble synthetic dyes in foodstuffs by liquid chromatography coupled to quadrupole Orbitrap mass spectrometry

A LC-Q-Orbitrap HRMS analytical method for both qualitative screening and quantitative determination of 90 synthetic dyes including ten groups of isomers in foods has been established. An in-house synthetic dyes database and characteristic ions were also developed. Based on Q-Orbitrap HRMS, mass spectrum and fragmentation patterns of synthetic dyes were studied, which indicated that double charged ions were usually the main precursor ions. Matrix effects were successfully eliminated by the C₁₈ d-SPE clean-up coupled with dilute and shoot approach with methanol-water (1:4, v/v) in 100-fold. For most of the compounds, mean recoveries were satisfactory between 70% and 120% with RSD < 20% at three spiked level in the range of 0.025-1.0 mg/kg. The screening detection limits ranged from 0.025 - 1.0 mg/kg. Method validation showed that the established method was efficient, rapid and high-throughput, which has been successfully applied to the monitoring of these water-soluble synthetic dyes in foods.

Miniaturized liquid chromatography applied to the analysis of residues and contaminants in food: A review

The humankind is pretty dependent on food to control several biological processes into the organism. As the world population increases, the demand for foodstuffs follows the same trend claiming for a high food production situation. For this reason, a substantial amount of chemicals is used in agriculture and livestock husbandries every year, enhancing the likelihood of contaminated foodstuffs being commercialized. This outlook becomes a public health concern; thus, the governmental regulatory agencies impose laws to control the residues and contaminants in food matrices. Currently, one of the most important analytical techniques to perform it is LC. Despite its already recognized effectiveness, it is often time consuming and requires significant volumes of reagents, which are transformed into toxic waste. In this context, miniaturized LC modes emerge as a greener and more effective analytical technique. They have remarkable advantages, including higher sensitivity, lower sample amount, solvent and stationary phase requirements, and more natural coupling to MS. In this review, most of the critical characteristics of them are discussed, focusing on the benchtop instruments and their related analytical columns. Additionally, a discussion regarding the last 10 years of publications reporting miniaturized LC application for the analysis of natural and industrial food samples is categorized. The main chemical classes as applied in the crops are highlighted, including pesticides, veterinary drugs, and mycotoxins.

Quantitative determination of pesticide residues in specific parts of bee specimens by nanoflow liquid chromatography high resolution mass spectrometry

The presence of pesticide residues in bees is of great interest, given the central role of bees as indicators for environmental assessment. The goal of this article is to propose a method to capture enhanced chemical information for these central environmental indicators. Most of the methods rely on the analysis of pooled samples rather than individual specimens due to practical sample preparation method considerations and limitations in sensitivity. This leads to miss information on the mapping of pesticides and actual amount of pesticide per specimen. In this article, a nanoflow liquid chromatography system coupled to high resolution mass spectrometry (using a hybrid quadrupole-Orbitrap instrument) has been applied for the development of a multiresidue pesticide method for the determination of 162 multiclass pesticides in specific part of honeybee samples (ca. abdomen, head or thorax). The reduced flow rate provided an enhancement in sensitivity and a strong reduction of matrix effects, thus only a quick and simple ultrasound assisted extraction using minute amount of sample was required. Satisfactory results were obtained for all tested analytes with concentration levels detected lower than 0.5 ng g^-1 in all cases, thus being acceptable for monitoring purposes. Matrix effect was negligible for 94% of compounds. Extraction recoveries ranged from 70% to 105%, being within SANTE guidelines. Finally, the applicability of the method was demonstrated, by successful application to the analysis of contaminated honeybee samples, extracting useful information from specific bee parts of single specimens, thus, enabling pseudo spatially resolved chemical information.

Basin-scale monitoring and risk assessment of emerging contaminants in South American Atlantic coastal lagoons

Emerging contaminants (ECs) such as pharmaceuticals, personal care products, drugs of abuse and polar pesticides are under particular attention due to their high consumption, frequent detection in the environment and reported ecotoxicological risk. This study investigates the occurrence and distribution of multiclass of ECs in surface waters at basin scale of two Atlantic coastal lagoons of Uruguay, South America. For this purpose, a target screening approach covering up to 362 compounds was employed using nanoflow liquid chromatography - high resolution mass spectrometry (nanoLC/HRMS). 56 compounds were identified including five banned pesticides in the European Union: atrazine, carbendazim, chlorpyrifos ethyl, diazinon, and ethion. Pharmaceuticals, hormones and drugs of abuse showed maximum detection frequencies and concentrations downstream cities. The highest occurrence of pesticides was found in lagoons and streams with neighboring agricultural activity. ECs were also found in coastal sea. Environmental risk assessment revealed that the hormones 17α-ethinylestradiol and 17-β-estradiol showed the highest risk to aquatic organisms in these basins. This study represents the first basin- scale monitoring of ECs in superficial waters encompassing streams, lagoons, and coastal seas in Uruguay, South America.

Dilute-and-shoot coupled to nanoflow liquid chromatography high resolution mass spectrometry for the determination of drugs of abuse and sport drugs in human urine

In this work, a sensitive nanoflow liquid chromatography high-resolution mass spectrometry screening method has been developed for the determination of multiclass drugs of abuse and sport drugs in human urine. 81 drugs belonging to different multiclass pharmaceuticals were targeted. The method is based on the use of a nanoLC column (75 µm × 150 mm, 3 µm particle size and 100 Å pore) with the nanospray emitter tip integrated so that dead volumes are significantly minimized. Data acquisition method included both full-scan and all ion fragmentation experiments using an Orbitrap analyser (Q-Exactive) operated in the positive ionization mode. To increase laboratory throughput, a dilute-and-shoot methodology has been tested and proposed, based solely on direct urine dilution without further sample workup. Matrix effects were evaluated, showing a negligible effect for all studied compounds when a dilution 1:50 was implemented. Despite this high-dilution factor, limits of quantification were still satisfactory, with values below 5 µg L^-1 in most cases, being lower than their minimum required performance limits correspond established by the World Anti-Doping Agency. Therefore, the use of the dilute-and-shoot method with the enhanced sensitivity provided by nanoflow LC setup could be useful tool for the determination of studied compounds in drug testing, thus increasing laboratory performance, because a minimum sample treatment steps are required.