Hollow porous molecularly imprinted polymer for highly selective clean-up followed by influential preconcentration of ultra-trace glibenclamide from bio-fluid

Fabrication of magnetic hydrophilic imprinted polymers via two-step immobilization approach for targeted detecting bisphenol A

Molecularly imprinted polymer with water-compatibility for effective separation and enrichment of targeted trace pollutants from complicated matrix has captured extensive attention in terms of their high selectivity and matrix compatibility. This study focuses on modified β-cyclodextrin is used as a hydrophilic functional monomer to develop magnetic molecularly imprinted polymers (MMIPs). MMIPs were prepared using Fe3O4 nanoparticles as carriers and bisphenol A (BPA) as templates using a two-step fixation strategy and surface imprinting technology. The structural characteristic and binding properties of the prepared MMIPs were thoroughly studied. The MMIPs exhibited high crystallinity, high adsorption capacity, fast rebinding rate, remarkable selectivity and distinguish reusability. In addition, through magnetic solid-phase extraction separation technology and high-performance liquid chromatography ultraviolet quantitative detection technology, MMIPs are used for selective enrichment and detection of BPA in complex media such as environmental water and milk. This work provides a new route to construct the hydrophilic molecularly imprinted materials and a new sight on developing more effective sample pretreatment strategies for monitoring targeted pollution in complicated aqueous media.

Dispersive micro solid phase extraction of glibenclamide from plasma, urine, and wastewater using a magnetic molecularly imprinted polymer followed by its determination by a high-performance liquid chromatography-photodiode array detector

The present study describes the development of a simple and selective analytical method for dispersive micro solid phase extraction and determination of glibenclamide (GLB) using magnetic molecularly imprinted polymer (MMIP) as a sorbent. MMIP was fabricated by the non-covalent method on the surface of silicated Fe3O4 and had a high affinity for glibenclamide; dual monomers, itaconic acid and allylamine, were used for this. Polymerization was achieved by the precipitation method in the presence of glibenclamide as the template and ethylene glycol dimethacrylate as the cross-linker. The morphology and structural properties of the MMIP were characterized by different analytical methods. To achieve maximum extraction efficiency, influencing parameters were optimized. The linearity range was 1-2000 and 12-2000 μg L-1 by high-performance liquid chromatography-photodiode array detector (HPLC-PDA) and UV-vis spectroscopy, respectively. The detection and quantification limits with UV-vis and HPLC-PDA analyses were 4 and 12 μg L-1 and 0.3 and 1 μg L-1, respectively. Under optimized conditions, recovery of glibenclamide spiked in plasma, human urine, and wastewater was between 89.4 and 102.9% at the concentration levels of 25, 250, and 500 μg L-1; relative standard deviations were below 3.7% by HPLC-PDA. The developed method has a favorable pre-concentration factor of 140.0. Equilibrium data and sorption isotherms fitted well with the Langmuir model. A maximum sorption capacity of 24.260 mg g-1 was acquired based on the Langmuir model. The synthesized sorbent with high selectivity was used to separate GLB from complex biological systems and wastewater before measurement with UV-vis or HPLC-PDA.

Magnetic graphene oxide carbon dot nanocomposites as an efficient quantification tool against parabens in water and cosmetic samples

A new method is developed for the simultaneous detection and extraction of parabens, including methyl paraben (MP), ethyl paraben (EP), propyl paraben (PP), and butyl paraben (BP), based on magnetic graphene oxide carbon dot nanocomposites (Fe3O4@GO@CD). Fe3O4@GO@CD has been synthesized using one pot hydrothermal method by intercalating iron oxide and carbon dots between the layers of graphene oxide. Fe3O4@GO@CD was applied as the magnetic solid phase sorbent for the simultaneous extraction and detection of parabens from water (tap and river water) and cosmetic samples (hair serum and sunscreen cream). MP was measured at concentration of 0.25-0.26 ng/mL in hair serum, while PP at 0.32-0.33 ng/mL in sunscreen cream. Notably, good recoveries (88.74-98.03%; RSD = 2.31-6.88%) for river and tap water with detection limit of 0.039-0.046 ng/mL were attained. The method has good cyclability up to 16 cycles and was highly repeatable. All these findings suggest that the Fe3O4@GO@CD would be potential sorbent for the analysis of parabens.

Synthesis of hollow molecular imprinting nanoparticles based on polyethylenimine and boronate affinity for selective extraction of ovalbumin

The hollow MCM-48 polyethyleneimine carboxyphenylboronic acid molecularly imprinted polymers (H-MPC@MIPs) were synthesized to efficiently and selectively separate and enrich the ovalbumin (OVA) in egg white samples. Polyethyleneimine contained enough active amino groups to increase the amount of boric acid molecules modified to silica nanoparticles. Meanwhile, the materials were etched to enhance the adsorption effect. The H-MPC@MIPs exhibited a rapid adsorption equilibrium rate (within 30 min) and outstanding adsorption capacity for OVA (1334.1 mg g-1). It possessed a good reusability after 5 cycles. In addition, both the high density and the imprinting action of boric acid were essential for enhancing the identification and binding of OVA. The OVA in egg white samples was successfully selectively enriched using this method.

A dual-emission ratiometric fluorescent biosensor for ultrasensitive detection of glibenclamide using S-CDs/CdS quantum dots

In the present work, sulfide-doped carbon dots (S-CDs)/cadmium sulfide quantum dots (CdS QDs) ratiometric fluorescent nanosensor has been developed for sensitive and selective determination of glibenclamide (GLC) in biological fluids. The method was based on the quenching effect of GLC on the dual-emission intensity of the S-CDs/CdS QDs system at 420 nm and 650 nm, which are related to S-CDs and CdS QDs, respectively. The fluorimetric data analysis indicated that the fluorescence signals of the system were quenched by adding GLC in a concentration-dependent manner. A good linear relationship was observed between GLC concentration and the quenched fluorescence intensity of the S-CDs/CdS QDs in the range of 0.3 nM-10.0 μM. The limit of detection (LOD) value was estimated to be 0.12 nM. Furthermore, under optimum conditions, GLC was detected in spiked human serum sample (as real media) using the developed ratiometric nanosensor with an accuracy of 99.6%. According to the results, the developed dual-emission system can be used as a reliable method for the quantitative detection of GLC in biological samples.

Biodegradable Magnetic Molecularly Imprinted Anticancer Drug Carrier for the Targeted Delivery of Docetaxel

Molecularly imprinted biodegradable polymers are receiving considerable attention in drug delivery due to their ability of targeted recognition and biocompatibility. This study reports the synthesis of a novel fluorescence-active magnetic molecularly imprinted drug carrier (MIDC) using a glucose-based biodegradable cross-linking agent for the delivery of anticancer drug docetaxel. The magnetic molecularly imprinted polymer (MMIP) was characterized through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy, and vibrating sample magnetometry (VSM). The MMIP presented a magnetization value of 0.0059 emu g^-1 and binding capacity of 72 mg g^-1 with docetaxel. In vitro and in vivo studies were performed to observe the effectiveness of the MIDC for drug delivery. The cell viability assay suggested that the MMIP did not present toxic effects on healthy cells. The magnetic property of the MMIP allowed quick identification of the drug carrier at the target site by applying the external magnetic field to mice (after 20 min of loading) and taking X-ray images. The novel MMIP-based drug carrier could thus deliver the drug at the target site without affecting the healthy cells.

Chromatographic techniques for the analysis of organophosphate pesticides with their extraction approach: a review (2015-2020)

In agriculture, a wide range of OPPs has been employed to boost crop yield, quality, and storage life. However, due to the ever-increasing population and rapid urbanization, pesticide use has surged in recent years. These compounds are exceedingly poisonous to humans, and despite the fact that specific legislation prohibits their use, the frequency of toxic and/or fatal incidents, as well as current statistics, suggest that they are currently accessible. As a result, determining the exposure to these substances as well as their detection (and that of their metabolites) in different types of exposed samples has become a hot issue in terms of quality and safety concerns. However, developing tools for the evaluation of these substances is a critical challenge for laboratories. Various chromatographic-based methods reported in the period of 2015-2020 have been developed, which are summarized and critically reviewed in this article, including the extraction of the target OPPs from different kinds of matrices. A comparison among the extraction and analysis techniques has been made in the current review article.

Hollow porous molecularly imprinted polymers as emerging adsorbents

Hollow porous molecularly imprinted polymers (HPMIPs) are identified as promising adsorbents with many advantageous properties (e.g., large number of imprinted cavities, highly accessible binding sites, controllable pore structure, and fast mass transfer). Because of such properties, HPMIPs can exhibit improved binding capacity and kinetics to make analyte molecules readily interact with a greater number of recognition sites on the imprinted shell. This review highlights the synthesis and utility of HPMIPs as adsorbents to cover diverse targets of interest (e.g., endocrine disrupting chemicals, pharmaceuticals, pesticides, and heavy metal ions). The overall potential of HPMIPs is thus discussed in the context of analytical chemistry with particular focus on the efficient extraction of trace-level targets from complex matrices.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Molecularly Imprinted Polymers for Dispersive (Micro)Solid Phase Extraction: A Review

The review describes the development of batch solid phase extraction procedures based on dispersive (micro)solid phase extraction with molecularly imprinted polymers (MIPs) and magnetic MIPs (MMIPs). Advantages and disadvantages of the various MIPs for dispersive solid phase extraction and dispersive (micro)solid phase extraction are discussed. In addition, an effort has also been made to condense the information regarding MMIPs since there are a great variety of supports (magnetite and magnetite composites with carbon nanotubes, graphene oxide, or organic metal framework) and magnetite surface functionalization mechanisms for enhancing MIP synthesis, including reversible addition-fragmentation chain-transfer (RAFT) polymerization. Finally, drawbacks and future prospects for improving molecularly imprinted (micro)solid phase extraction (MIMSPE) are also appraised.

Rational Design and Experimental Research on the Self-Assembled System of Thermosensitive Molecularly Imprinted Polymers Formed by α-Lipoic Acid and N-Vinyl Caprolactam

In this paper, the main work was to study the theoretical self-assembly process of thermosensitive molecularly imprinted polymers (MIPs) for α-lipoic acid and to investigate thermosensitive functional monomers through density functional theory calculations (DFT) and intermolecular weak interaction analysis. The M06-2X/6-311+G (d, p) level was used to study the structural parameters, bonding sites, natural population analysis, binding energies ( $\Delta E$ ), atom in molecules (AIM), independent gradient model (IGM), and imprinted molar ratio. The results revealed that α-lipoic acid mainly interacted with N-vinyl caprolactam (NVCL) by weak hydrogen bonds, and the best conditions for MIP synthesis were an optimum molar ratio of 1 : 4 (α-lipoic acid/NVCL). The thermosensitive properties showed that the highest adsorption was at 40°C and the lowest adsorption was at 20°C; also, the MIPs released the intercepted α-lipoic acid inside polymers, and the lower critical solution temperatures (LCST) of MIPs and nonimprinted polymers (NIPs) are 25.7°C and 19.4°C, respectively. In this study, the thermosensitive MIPs displayed a different adsorption capacity towards NVCL, which could be applied for controlled separation and release of α-lipoic acid in different temperatures in a complex matrix.

Chitosan-Ni/Fe layered double hydroxide composites as an efficient solid phase extraction sorbent for HPLC-PDA monitoring of parabens in personal care products

There is a dire need for development of efficient and sensitive methods to efficiently screen parabens. In this research, we focused on quantification of four parabens (i.e., methylparaben (MP), ethylparaben (EP), propylparaben (PP), and butyl paraben (BP)) using chitosan intercalated nickel/iron layered double hydroxide (CS-Ni/Fe-LDH) composites as solid phase extraction sorbent prior to HPLC-PDA analysis. CS-Ni/Fe LDH composites with a heterogeneous, porous texture, and coral reef-like structure exhibit appealing extraction efficiency for the target parabens due to the enhanced possibility for the formation of hydrogen bonding and hydrophobic interactions. The performance of the composites was assessed and optimized for solid phase extraction of parabens from standard samples and real samples (rose water, cream, toothpaste, hair serum, and sunscreen). The LDH-SPE-HPLC method exhibited a wide linear range (e.g., 100-50,000 ng L^-1), good linearity (R² ≥ 0.999), and good precision (relative standard deviation (RSD) < 3%). This method successfully enriched selected parabens with remarkable recovery above 85.95% and a good RSD (0.01-2.90%). The quantitation of MP, EP, PP, and BP was made at detection range (and limits of detection (LOD)) of 5-15 (9.8), 11-21 (16.2), 6-18 (12.4), and 10-20 (15.6) ng L^-1, respectively. The prepared composites also displayed excellent performance with enhanced reusability/durability (n = 30 cycles) and reproducibility (n = 5).

Starch-Mg/Al layered double hydroxide composites as an efficient solid phase extraction sorbent for non-steroidal anti-inflammatory drugs as environmental pollutants

Using a co-precipitation method, starch-Mg/Al layered double hydroxide (S-Mg/Al LDH) composites were synthesized. Their physicochemical properties were assessed by Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermo-gravimetric analysis. The quantification of six non-steroidal anti-inflammatory drugs (NSAIDs) was conducted using real samples (e.g., hospital waste water, river water, sewage treatment plant water, and tablet formulations) by gas chromatography-mass spectrometry. For the development of this method, the system was optimized in terms of several key variables (e.g., pH, flow rate, and eluent type/volume). The developed method for NSAIDs exhibited good resolution, sensitivity, reproducibility, and specificity even in complex matrices with limits of detection between 4 and 20 pg/mL. Hence, S-Mg/Al LDH composites were proven to be efficient and fast solid phase extraction (SPE) sorbents for NSAIDs. In addition, each LDH-SPE cartridge showed good reusability without a noticeable change in performance (e.g., up to 30 cycles) and target recoveries between 99.5 - 82.9 %. This work should open up new opportunities for a sesnsitive and sustainable quantitative method for the determination of NSAIDs in complex samples.

Green biomimetic synthesis of Ag-TiO2 nanocomposite using Origanum majorana leaf extract under sonication and their biological activities

BACKGROUND

Studies of plant extract-mediated synthesis of nanoparticles is extensively explored and studied in recent time due to eco-friendly, cost-effectiveness and minimal use of toxic chemicals for synthesis. In this study, the synthesis of Ag-TiO2 nanocomposites (NCs) was carried out using Origanum majorana leaf extract under ultrasound irradiation. Origanum majorana leaf extract plays an important role as reducing and capping agent in synthesis of Ag-TiO2 nanocomposites (NCs). The antimicrobial activities of synthesised Ag-TiO2 NCs have been studied against Gram-positive and Gram-negative bacteria. In addition to this, the antioxidant activity of green Ag-TiO2 NCs was also evaluated on the basis of free radical scavenging activity against 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid (ABTS), and hydrogen peroxide free radicals.

RESULTS

Green-synthesised Ag-TiO2 NCs were successfully characterised on the basis of UV-Vis spectrophotometer, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction analysis (XRD), scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM-EDS) and transmission electron microscopy (TEM). The results revealed the spherical shape of nanocomposite with an average size 25-50 nm. The synthesised Ag-TiO2 NCs have showed significant antimicrobial activity against Escherichia coli, Bacillus subtilis and Aspergillus niger in comparison to TiO2 nanoparticles (NPs). The antioxidant evaluation of biomimetic synthesised Ag-TiO2 NCs also exhibited strong activity than TiO2 NPs and comparable to standard.

CONCLUSION

Green-synthesized Ag-TiO2 NCs provide a promising approach that can satisfy the requirement of large-scale industrial production bearing the advantage of low cost, eco-friendly and reproducible.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Activated carbon/diatomite-based magnetic nanocomposites for magnetic solid-phase extraction of S-phenylmercapturic acid from human urine

In this study, activated carbon/diatomite-based magnetic nancomposites (denoted as AC/DBMNs) were synthesized and applied as an adsorbent for magnetic solid-phase extraction of S-phenylmercapturic acid (S-PMA) from human urine prior to high-performance liquid chromatography. The surface morphologies and structures of AC/DBMNs were characterized by Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller surface area, vibrating sample magnetometer and ζ-potential measurements. The experimental parameters including sample volume, sample pH, adsorbent amount, extraction time, elution solvent and desorption time were investigated in detail. Under the optimum conditions, the method exhibited good linearity (r > 0.9993) within the concentration ranges of 0.03-1.0 mg/L. Moreover, the limits of detection and quantification were 0.01 and 0.03 mg/L, respectively. The enrichment factor was 5, and good recoveries (88.9-97.3%) with relative standard deviations in the range of 5.6-6.8% (n = 6) for inter-day and 6.3-8.1% (n = 6) for intra-day were achieved. The developed method was successfully applied to the analysis of S-PMA in urine samples. In addition, this accurate and sensitive method has great potential to be applied in the early screening and clinical diagnosis of the workers exposed to benzene.

Magnetic metal organic framework for pre-concentration of ampicillin from cow milk samples

The aim of this study is a present of a simple solvothermal synthesis approach to preparation of Cu-based magnetic metal organic framework (MMOF) and subsequently its application as sorbent for ultrasound assisted magnetic solid phase extraction (UAMSPE) of ampicillin (AMP) from cow milk samples prior to high performance liquid chromatography-Ultraviolet (HPLC-UV) determination. Characteristics of prepared MMOF were fully investigated by different techniques which showed the exclusive properties of proposed sorbent in terms of proper functionality, desirable magnetic property and also high specific surface area. Different influential factors on extraction recovery including sorbent dosage, ultrasonic time, washing solvent volume and eluent solvent volume were assessed using central composite design (CCD) based response surface methodology (RSM) as an operative and powerful optimization tool. This is the first report for determination of AMP using MMOF. The proposed method addressed some drawbacks of other methods and sorbents for determination of AMP. The presented method decreases the extraction time (4 min) and also enhances adsorption capacity (250 mg/g). Moreover, the magnetic property of presented sorbent (15 emu/g) accelerates the extraction process which does not need filtration, centrifuge and precipitation procedures. Under the optimized conditions, the proposed method is applicable for linear range of 1.0–5000.0 μg/L with detection limit of 0.29 μg/L, satisfactory recoveries (≥95.0%) and acceptable repeatability (RSD less than 4.0%). The present study indicates highly promising perspectives of MMOF for highly effective analysis of AMP in complicated matrices.

•

MMOF was prepared and used for the first time for determination of ampicillin from cow milk samples.

•

The extraction method was convenient, rapid and the MMOF can be used more than 8 times.

•

The MMOF have high specific surface area (300.0 m²/g) and high adsorption capacity (250.5 mg g⁻¹).

•

The separation time was only 5 min, which was much shorter than other reported.

A novel strategy for selective removal and rapid collection of triclosan from aquatic environment using magnetic molecularly imprinted nano-polymers

Triclosan (TCS) is a kind of chronic toxicity to aquatic organisms. Due to its highly effective antimicrobial, TCS has been widely applied in personal-care products, which naturally poses a potential risk to the ecological system and human health since its release into water-ecological environment. Therefore, it urgently demands a selective, easily separated, recyclable, and low-cost adsorbent to remove the residues of TCS from aquatic environments. In this study, a novel magnetic molecularly imprinted nano-polymers (TMIPs) were prepared for selective adsorption and convenient collection of TCS in aquatic samples, based on a core-shell technique using TCS as template molecule and SiO₂-coated Fe₃O₄ nanoparticles as the support substrate. The functional groups, particle size, morphology and magnetic property of TMIPs were characterized by Fourier-transform infrared spectroscopy, scanning electron microscope, transmission electron microscopy and vibrating sample magnetometer, respectively. The obtained TMIPs possessed excellent adsorption capacity (Q_e = 53.12 mg g^-1), speedy adsorption equilibrium time (2 min) and high selectivity (k' = 6.321) for TCS. Moreover, the pH-tolerance and stability tests manifested that the adsorption capacity of TMIPs for TCS was acid-resistance and could retain 94.2% of the maximum Q_e after 5 times removal-regeneration cycles. The feature of magnetically susceptibility can simplify the procedures of sample handling in TCS determination, because the TMIPs of TCS are easy to be recycled from aquatic samples. As an application demonstration, the toxicity test in microalgae confirmed that a tiny amount of TMIPs could significantly eliminate the toxic effect of TCS on Chlamydomonas reinhardtii via the efficient binding with TCS.

Acrylamide-Modified 3-Aminopropyltriethoxysilanes Hybrid Monomer for Highly Selective Imprinting Recognition of Theophylline

The hybrid monomer synthesized with 3-aminopropyltriethoxysilanes and acrylamide was applied for synthesis of molecularly imprinting polymers, and the obtained polymers were used as sorbent in solid-phase extraction for purification of theophylline (THP) in green tea. The static adsorption curves showed better molecular recognition ability and binding capability of the polymers for the target. On the optimized condition, a method was developed for increasing extraction of THP with satisfactory recovery of 93.7%. Good calibration linearity obtained in a range of 5-500 μg·mL-1. The recoveries at three spiked levels ranged from 86.7% to 100.7% with relative standard deviations ≤6.6% (n = 3). The result showed that the obtained polymers exhibited highly selective imprinting recognition to the analyte, and the number of templates was an important factor affecting the selective recognition ability of polymers. The proposed method with hybrid monomer imprinting polymers was successfully applied for purification of THP in green tea.

Ultrasonic exposure parameters screening in permeability of mycobacterium smegmatis cytoderm induced by cavitation based on artificial neural network identification

The low intensity ultrasound has been adopted by researchers to enhance the bactericidal effect against bacteria in vitro and in vivo. Although the mechanism is not completely understood, one dominant opinion is that the permeability increases because of acoustic cavitation. However, the relationship between ultrasonic exposure parameters and cavitation effects is not definitely addressed. In this paper, by establishing a modified artificial neural network (ANN) model between ultrasonic parameters and cavitation effects, the cavitation effects can be predicted and inversely the direction for choosing parameters can be given despite of different ultrasonic systems. Compared with the generic model, the computational results obtained by modified model are more close to experimental results with low calculation cost. It means that as an efficient solution, the validity of the new model has been proved. Although the research is of preliminary stage, the new method may have great value and significance because of reducing the experimental expense. The next step of this research is to explore an optimization method to obtain the most suitable parameters based on this identification model. We hope it can give a guideline for future applications in ultrasonic therapy.

Selective determination of some beta-blockers in urine and plasma samples using continuous flow membrane microextraction coupled with high performance liquid chromatography

In this work, an efficient method termed as continuous flow membrane microextraction coupled with high performance liquid chromatography is introduced for a highly selective determination of metoprolol and propranolol in the biological samples. According to this method, an aqueous source phase of the analytes (donor phase, 10 mL) is circulated into an extraction cell, which is separated from an aqueous acceptor phase (100 μL) by a small piece of polypropylene membrane sheet whose pores are impregnated by an organic solvent (1-octanol, 15 μL). The analytes are extracted from the donor phase into the organic solvent. They are subsequently selectively back-extracted into the acceptor solution due to the pH gradient. The proposed method is very convenient and has the capability of being fully automated. It provides a good preconcentration and an excellent repeatability. The extractant is an aqueous phase, and by prevention of the extraction of macromolecules through the membrane, the developed method provides a high sample clean-up. In order to maximize the extraction efficiency, the influential parameters including the type of mediator solvent, pH values for the donor and acceptor solutions, extraction time, ionic strength, stirring rate, and volume of the acceptor solution are optimized. The calibration curves were obtained with a reasonable linearity (r² = 0.999) in the range of 3-1000 ng mL^-1. The limits of detection were 0.5 and 1.0 ng mL^-1, and excellent relative standard deviations were obtained (between 3.2% and 4.0%). Finally, the reliability of the procedure is evaluated by determination of metoprolol and propranolol in the human urine and plasma samples, which indicates the suitability, sensitivity, and high sample clean-up of the proposed method.

Preparation of core-shell magnetic molecularly imprinted polymer nanoparticle for the rapid and selective enrichment of trace diuron from complicated matrices

A novel magnetic MIPs (DUMIPs) was prepared by surface molecular imprinting method using superparamagnetic core-shell nanoparticle (Fe₃O₄@SiO₂) as the sacrificial support matrix, herbicide diuron as template, α-methacrylic acid as the functional monomer, trimethylolpropane trimethacrylate as the crosslinker, azobisisobutyronitrile as the initiator, and acetonitrile as the porogen. Highly cross-linked porous surface and excellent magnetic property were characterized by Fourier-transform infrared spectroscopy, transmission electron microscopy, and vibrating sample magnetometer, respectively. The adsorption capacity of DUMIPs was 8.1 mg g^-1, 2.6-fold over its corresponding non-imprinted polymers (DUNIPs). The adsorption in DUMIPs was considered as multilayer adsorption and posed high affinity to diuron, due to the better fitting to Freundilich isotherm. Competitive recognition study demonstrated DUMIPs had highly selective binding diuron. DUMIPs, as an influential sorbent has been used for selective extraction of diuron from environmental samples (paddy field water, paddy soil and grain seedlings) and the elution was determined by high efficiency liquid chromatography (HPLC). In this analytical method, various factors affecting the extraction efficiency such as pH, sorbent dosage, utilization efficiency and volumes of eluent were simultaneously investigated. Under the optimal conditions, the linearity of the method obtained is in the range of 0.02-10.0 mg L^-1. The limit of detection is 0.012 mg L^-1. In four spiked levels (0.04, 0.2, 1.0, and 4.0 mg kg^-1), the recoveries of diuron in real samples are in the range of 83.56%-116.10% with relative standard deviations in the range of 1.21-6.81%. Importantly, compared to C₁₈-SPE column, the MMIPs exhibited convenient separation by external magnetic field, strong clean-up capacity, and selective enrichment for diuron. Thus, the DUMIPs-based method is great potential for efficient sample preparation in the determination of trace amounts of diuron residues in complex matrices.

Extraction of atenolol from spiked blood serum using a molecularly imprinted polymer sorbent obtained by precipitation polymerization

Atenolol (ATE) is a cardio-selective β-blocker that is used in the treatment of hypertension over extended periods. However, ATE, like propranolol, has major potential for misuse as a performance-enhancing drug in several sports. Therefore, an efficient and selective separation method is required to detect and monitor the level of ATE in the body. This paper presents a molecularly imprinted polymer with specific and selective binding to ATE using precipitation polymerization. We show that when employed in an optimized molecular imprinted solid phase extraction (MI-SPE) protocol, recoveries of 93.65 ± 1.29% from spiked blood serum with excellent discrimination from other β-blocker drugs is possible. The methodology used in this study includes molecular modeling interaction between ATE and itaconic acid (ITA) as functional monomer, followed by determination of binding constants with spectrophotometry, synthesis of the polymer using precipitation polymerization and ending with characterization and application of polymers to extract ATE in serum. Docking analysis revealed a binding affinity between ATE and ITA of −2.0 kcal/mol with the formation of hydrogen bonding. The association constant between ATE and ITA was studied by UV titration in two different solvents, with evidence of an association constant 6.277 × 10² M⁻¹ measured in acetonitrile: methanol (1:1). An optimized MI-SPE protocol was developed for the extraction of ATE from spiked blood serum, obtaining recoveries of 93.65% with excellent selectivity toward other β-blocker drugs.