Immunological analysis of food proteins using high-performance thin-layer chromatography-immunostaining

High-Performance Thin-Layer Chromatography-Immunostaining as a Technique for the Characterization of Whey Protein Enrichment in Edam Cheese

Whey protein-enriched cheese can be produced by means of a high-temperature treatment of a part of the cheese milk. In this way, the nutritional quality of the resulting cheeses can be increased while resources are conserved. High-performance thin-layer chromatography-immunostaining (HPTLC-IS) using specific β-lactoglobulin (β-LG) antibodies was applied to study the implementation and stability of β-LG in two different sample sets of whey protein-enriched Edam model cheeses, including industrial-scale ones. Two methods were compared for the extraction of the proteins/peptides from the cheese samples. By applying tryptic hydrolysis directly from a suspended cheese sample instead of a supernatant of a centrifuged suspension, a better yield was obtained for the extraction of β-LG. When applying this method, it was found that selected epitopes in the tryptic β-LG peptides remain stable over the ripening period of the cheese. For four of the tryptic β-LG peptides detected by immunostaining, the amino acid sequence was identified using MALDI-TOF-MS/MS. One of the peptides identified was the semi-tryptic peptide VYVEELKPTP. A linear relationship was found between the content of this peptide in cheese and the proportion of high-heated milk in the cheese milk. β-LG enrichment factors of 1.72 (n = 3, sample set I) and 1.33 ± 0.19 (n = 1, sample set II) were determined for the cheese samples containing 30% high-heated milk compared to the non-enriched samples. The relative β-LG contents in the cheese samples with 30% high-heated milk were calculated to be 4.35% ± 0.39% (sample set I) and 9.11% ± 0.29% (sample set II) using a one-point calibration. It can be concluded that the HPTLC-IS method used is a suitable tool for the analysis of whey protein accumulation in cheese, being therefore potentially directly applicable on an industrial scale. For more accurate quantification of the whey protein content in cheese, an enhanced calibration curve needs to be applied.

Benzyl isothiocyanate-modified α-lactalbumin - Two-dimensional high-performance thin-layer chromatography for analyzing modified peptides

In complex food matrices, non-directed reactions between food proteins and secondary plant metabolites (SPM) are conceivable. In this study, the interaction between the bioactive metabolite from garden cress (Lepidium sativum) and selected Brassicaceae - benzyl isothiocyanate (BITC) - and the dairy protein α-lactalbumin (α-LA) was investigated. It was focused on monitoring the proteolytic degradation behaviour of unmodified and BITC-modified α-LA with two-dimensional high-performance thin-layer chromatography (2D-HPTLC). The two-dimensional approach of HPTLC offers high resolution in the separation of complex peptide mixtures and might enable differentiation of protein modifications. Based on the specific peptide patterns of native and modified peptides, conclusions can be drawn about differences in protein/peptide polarity, location of a modification, and digestibility. The aim was to characterize tryptically hydrolyzed unmodified and BITC-modified peptides using the 2D method and to investigate the influence of BITC modification of α-LA on polarity and digestibility. To determine the repeatability of peptide separation by 2D-HPTLC, the unmodified and BITC-modified protein hydrolyzates were separated six times. The absolute standard deviations between the retardation factors of the individual peptide spots varied between 0.52 and 4.79 mm for the x-coordinates and between 0.41 and 6.47 mm for the y-coordinates for all three samples. Here, the mean relative standard deviations ranged from 5.80 to 10.4% for the x-coordinates and from 5.91 to 18.3% for the y-coordinates. The results of the tryptic hydrolysis indicated that, depending on the concentration of BITC used, the modification sterically hinders the cleavage sites for the enzyme, resulting in a reduced digestibility. Covalent binding of the hydrophobic BITC altered the digestibility and polarity of the protein, leading to a difference in peptide patterns between the unmodified and modified α-LA. It was concluded that the reaction was undirected, resulting in a mixture of unmodified and modified peptides, and that elongated modified peptides were formed by BITC blocking of trypsin cleavage sites.

Two-dimensional high-performance thin-layer chromatography for the characterization of milk peptide properties and a prediction of the retention behavior - a proof-of-principle study

High-performance thin-layer chromatography (HPTLC) is a suitable method for the analysis of peptides and proteins due to a wide selection of stationary and mobile phases and various detection options. Especially, two-dimensional HPTLC (2D-HPTLC) enables a higher resolution compared to one-dimensional HPTLC in the separation of complex peptide mixtures. Similar to 2D electrophoresis, characteristic peptide patterns can be obtained, allowing a differentiation of ingredients based on varying protein origins. The aim of this study was to evaluate 2D-HPTLC with regard to its suitability for the characterization of proteins/peptides and to verify whether it is possible to predict the retention behavior of peptides based on their properties. As models, the five most abundant milk proteins α-lactalbumin, β-lactoglobulin, α-, β-, and κ-Casein were used. In order to determine the repeatability of the peptide separation by 2D-HPTLC, each tryptic protein hydrolyzate was separated eight times. The standard deviations of the retardation factors for the separated peptides varied between 1.0 and 11.1 mm for the x-coordinate and 0.5-7.3 mm for the y-coordinate. It was also shown that after the chromatographic separation, peptides of the individual protein hydrolyzates were located in specific areas on the HPTLC plate, so that a clustering could be obtained for the whey proteins' as well as the caseins' hydrolyzates. For establishing correlations between the properties of the peptides and their retardation factors, 51 of 85 selected peptides were identified by matrix-assisted laser desorption/ionization time-of-flight tandem mass spectrometry (MALDI-TOF-MS/MS). On this basis, statistically significant correlations (α = 0.05) between the retardation factors of the peptides and their isoelectric points, as well as the percentage of anionic and non-polar amino acids in the peptides were established. Finally, it was investigated, whether the retardation factors for peptides can be predicted on the basis of a linear regression of the percentage of non-polar amino acids in a peptide. For this purpose, a mixture of artifical (synthetic) peptides (n = 14) was separated by 2D-HPTLC and the measured retardation factors were compared with the corresponding retardation factors calculated. Absolute deviations of 0.3-17.9 mm were obtained. In addition, the universal applicability of the method to other protein sources other than milk proteins (animal protein) was tested using a mixture of pea peptides (plant protein, n = 3) resulting in absolute deviations of 0.7-8.6 mm.

Immunological Analysis of Isothiocyanate-Modified α-Lactalbumin Using High-Performance Thin Layer Chromatography

Undirected modifications between food proteins and secondary plant metabolites can occur during food processing. The results of covalent interactions can alter the functional and biological properties of the proteins. The present work studied the extent of which covalent conjugation of the bioactive metabolite benzyl isothiocyanate (BITC; a glucosinolate breakdown product) to the whey protein α-lactalbumin affects the protein’s allergenicity. Additional to the immunological analysis of native untreated and BITC-modified α-lactalbumin, the analysis of antigenic properties of proteolytically digested protein derivatives was also performed by high performance thin layer chromatography and immunostaining. As a result of the chemical modifications, structural changes in the protein molecule affected the allergenic properties. In this process, epitopes are destroyed or inactivated, but at the same time, buried epitopes can be exposed or newly formed, so that the net effect was an increase in allergenicity, in this case. Results from the tryptic hydrolysis suggest that BITC conjugation sterically hindered the cleavage sites for the enzyme, resulting in reduced digestibility and allergenicity. Residual antigenicity can be still present as short peptide fragments that provide epitopes. The desire to make food safer for allergy sufferers and to protect sensitized individuals from an allergenic reaction makes it clear that the detection of food antigens is mandatory; especially by considering protein interactions.

Review of New Trends in the Analysis of Allergenic Residues in Foods and Cosmetic Products

BACKGROUND

Allergies represent an important health problem in industrialized countries. Allergen sensitization is an important risk factor for the development of allergic diseases; thus, the identification of an individual's allergen sensitization is essential for the diagnosis and treatment of diseases.

OBJECTIVE

This review compares different modern methods applied for the analysis of allergens in various matrices (from 2015 to the end of September 2019).

CONCLUSIONS

Immunological methods are still most frequently used for detection of allergens. These methods are sensitive, but the lack of specificity and cross-reaction of some antibodies can still be a relevant source of errors. DNA-based methods are fast and reliable for determination of protein allergens, but the epitopes of protein allergens with posttranslational modifications and their changes, originated during various processing, cannot be identified through the use of this method. Methods based on application of biosensors are very rapid and easy to use, and can be readily implemented as screening methods to monitor allergens. Recent developments of new high-resolution MS instruments are encouraging and enable development in the analysis of allergens. Fast, very sensitive, reliable, and accurate detection and quantification of allergens in complex samples can be used in the near future. Mass spectrometry coupled with LC, GC, or electrophoretic methods bring additional advances in allergen analysis. The use of LC-MS or LC-MS/MS for the quantitative detection of allergens in various matrices is at present gaining acceptance as a protein-based confirmatory technique over the routinely performed enzyme-linked immunosorbent assays.

Rapid microwave-assisted distillation–precipitation polymerization for the synthesis of magnetic molecular imprinted polymers coupled to HPTLC determination of perphenazine in human urine

Microwave-assisted distillation–precipitation polymerization (MWDPP) for the synthesis of magnetic molecularly imprinted polymers (MMIPs) under atmospheric pressure is reported.

Analysis of Protein-Phenolic Compound Modifications Using Electrochemistry Coupled to Mass Spectrometry

In the last decade, electrochemical oxidation coupled with mass spectrometry has been successfully used for the analysis of metabolic studies. The application focused in this study was to investigate the redox potential of different phenolic compounds such as the very prominent chlorogenic acid. Further, EC/ESI-MS was used as preparation technique for analyzing adduct formation between electrochemically oxidized phenolic compounds and food proteins, e.g., alpha-lactalbumin or peptides derived from a tryptic digestion. In the first step of this approach, two reactant solutions are combined and mixed: one contains the solution of the digested protein, and the other contains the phenolic compound of interest, which was, prior to the mixing process, electrochemically transformed to several oxidation products using a boron-doped diamond working electrode. As a result, a Michael-type addition led to covalent binding of the activated phenolic compounds to reactive protein/peptide side chains. In a follow-up approach, the reaction mix was further separated chromatographically and finally detected using ESI-HRMS. Compound-specific, electrochemical oxidation of phenolic acids was performed successfully, and various oxidation and reaction products with proteins/peptides were observed. Further optimization of the reaction (conditions) is required, as well as structural elucidation concerning the final adducts, which can be phenolic compound oligomers, but even more interestingly, quite complex mixtures of proteins and oxidation products.