Magnetic sporopollenin-cyanopropyltriethoxysilane-dispersive micro-solid phase extraction coupled with high performance liquid chromatography for the determination of selected non-steroidal anti-inflammatory drugs in water samples

Fabrication of sea urchin shaped polyaniline-modified magnetic microporous organic network for efficient extraction of non-steroidal anti-inflammatory drugs from animal-derived food samples

In this work, a novel polyaniline-modified magnetic microporous organic network (MMON-PANI) composite was fabricated for effective magnetic solid phase extraction (MSPE) of five typical nonsteroidal anti-inflammatory drugs (NSAIDs) from animal-derived food samples before high performance liquid chromatography (HPLC) detection. The core-shell sea urchin shaped MMON-PANI integrates the merits of Fe3O4, MON, and PANI, exhibiting large specific surface area, rapid magnetic responsiveness, good stability, and multiple binding sites to NSAIDs. Convenient and effective extraction of trace NSAIDs from chicken, beef and pork samples is realized on MMON-PANI via the synergetic π-π, hydrogen bonding, hydrophobic, and electrostatic interactions. Under optimal conditions, the MMON-PANI-MSPE-HPLC-UV method exhibits wide linear ranges (0.2-1000 μg L-1), low limits of detection (0.07-1.7 μg L-1), good precisions (intraday and inter-day RSDs < 5.4 %, n = 3), large enrichment factors (98.6-99.9), and less adsorbent consumption (3 mg). The extraction mechanism and selectivity of MMON-PANI are also evaluated in detail. This work proves the incorporation of PANI onto MMON is an efficient way to promote NSAIDs enrichment and provides a new strategy to synthesize multifunctional MON-based composites in sample pretreatment.

Non-steroidal anti-inflammatory drugs (NSAIDs) in the environment: Updates on pretreatment and determination methods

Non-steroidal anti-inflammatory drugs (NSAIDs) are widely used in human and animal health care to reduce persistent inflammation, pain and fever because of their anti-inflammatory, analgesic and antipyretic effects. However, the improper discharge and disposal make it becomes a major contaminant in the environment, which poses a big threat to the ecosystem. For this reason, accurate, sensitive, effective, green, and economic techniques are urgently required and have been rapidly developed in recent years. This review summarizes the advancement of sample preparation technologies for NSAIDs involving solid-phase extraction, solid-phase microextraction, liquid-phase microextraction, QuEChERS, and matrix solid-phase dispersion. Meanwhile, we overview and compare analytical technologies for NSAIDs, including liquid chromatography-based methods, gas chromatography-based methods, capillary electrophoresis, and sensors, particularly the development of liquid chromatography-based methods. Furthermore, we focus on their progress and conduct a comparison between their advantages and disadvantages.

Synthesis of a Graphene-Encapsulated Fe3C/Fe Catalyst Supported on Sporopollenin Exine Capsules and Its Use for the Reverse Water-Gas Shift Reaction

Bioderived materials have emerged as sustainable catalyst supports for several heterogeneous reactions owing to their naturally occurring hierarchal pore size distribution, high surface area, and thermal and chemical stability. We utilize sporopollenin exine capsules (SpECs), a carbon-rich byproduct of pollen grains, composed primarily of polymerized and cross-linked lipids, to synthesize carbon-encapsulated iron nanoparticles via evaporative precipitation and pyrolytic treatments. The composition and morphology of the macroparticles were influenced by the precursor iron acetate concentration. Most significantly, the formation of crystalline phases (Fe3C, α-Fe, and graphite) detected via X-ray diffraction spectroscopy showed a critical dependence on iron loading. Significantly, the characteristic morphology and structure of the SpECs were largely preserved after high-temperature pyrolysis. Analysis of Brunauer-Emmett-Teller surface area, the D and G bands from Raman spectroscopy, and the relative ratio of the C=C to C-C bonding from high-resolution X-ray photoelectron spectroscopy suggests that porosity, surface area, and degree of graphitization were easily tuned by varying the Fe loading. A mechanism for the formation of crystalline phases and meso-porosity during the pyrolysis process is also proposed. SpEC-Fe10% proved to be highly active and selective for the reverse water-gas shift reaction at high temperatures (>600 °C).

Dispersive solid-phase extraction of non-steroidal anti-inflammatory drugs in water and urine samples using a magnetic ionic liquid hypercrosslinked polymer composite

In this work, Friedel-Crafts alkylation was successfully applied to prepare a magnetic ionic liquid hypercrosslinked polymer composite (Fe₃O₄@IL-HCP), which was subsequently employed as magnetic solid-phase extraction (MSPE) adsorbent for the isolation and enrichment of trace non-steroidal anti-inflammatory drugs (NSAIDs). The developed composite was comprehensively characterized using various techniques, with the results indicating that it possessed high saturation magnetization (39.44 em g ^- 1), large specific surface area (175 m²g ^- 1), and high adsorption capacity for NSAIDs. The adsorption behavior and mechanisms were also investigated in detail. NSAIDs were adsorbed onto the Fe₃O₄@IL-HCP sorbent via a heterogeneous multilayer process consisting of hydrogen bonding and π-π and electrostatic interactions. Additionally, the composite's large surface area and multiple active sites enabled extraction equilibrium within 6 min. By coupling with high performance liquid chromatography (HPLC), the developed MSPE/HPLC method was applied for the determination of selected NSAIDs in water and urine samples. The developed method displayed wide linear ranges, low limits of detection (0.12-0.30 ng mL^-1 and 0.15-1.5 ng mL^-1 in water and urine samples, respectively), sufficient recoveries (92.8-109%), and good precision (relative standard deviations ≤ 4.6%). Thus, the findings of this work provide an appealing alternative for the extraction and determination of trace NSAIDs in environmental water and biological samples.

Vortex-assisted supramolecular solvent dispersive liquid–liquid microextraction of ketoprofen and naproxen from environmental water before chromatographic analysis: response surface methodology optimisation

A microextraction procedure that is rapid and simple to extract and preconcentrate ketoprofen and naproxen is proposed. An environmentally friendly supramolecular solvent was applied as an extraction solvent and proved to be efficient in the extraction of ketoprofen and naproxen from environmental water. The design of experiment approach was used to screen, optimize significant parameters, and determine optimum experimental conditions. Under optimized experimental conditions, the vortex-assisted supramolecular solvent dispersive liquid–liquid microextraction provided a good linearity (0.57–700 µg L−1), low limits of detection (0.17–0.24 µg L−1) and extraction reproducibility below 9%. The high percentage relative recoveries (93.6–101.4%) indicated that the method is not affected by matrix. The practical applicability of the method was assessed by analysing ketoprofen and naproxen in river water and effluent wastewater samples. Both analytes were found in effluent wastewater.

Sporopollenin based materials as a versatile choice for the detoxification of environmental pollutants - A review

Before making the transfer to land, plants survive in water for millions of years to avoid the severe circumstances that prevail on lands, such as drought and UV radiation. All land plant spores are coated in sporopollenin, a substance that has developed to endow pollen and spore shells with exceptional, one-of-a-kind qualities. In a nutshell, sporopollenin-coated spores are a unique invention only seen in land plants. Sporopollenin, discovered in the outer exine layer of pollen walls, is a lipid and phenolic-based polymer with high carbon, hydrogen, and oxygen cross-linking. Products based on sporopollenin can remediate toxic pollutant contamination in the aquatic environment. This research and development are now underway. In this review, we show how sporopollenin-based adsorbents act in environmental challenges and their immense promise for this application via remarkable physical and chemical characteristics. A comparison is made of the benefits of various sporopollenin-modified structures. This strategy will further our understanding of how a biopolymer's structure can be accommodated to address emerging environmental challenges, revealing more about sporopollenin's dynamical nature.

Performance comparison between solid phase extraction and magnetic carbon nanotubes facilitated dispersive-micro solid phase extractions (Mag-CNTs/d-µSPE) of a cyanide metabolite in biological samples using GC–MS

Dispersive-micro solid phase extraction (d-µSPE) has gained increasing attention due to its convenience, effectiveness, and flexibility for sorbent selection. Among a various selection of materials, magnetic carbon nanotubes (Mag-CNTs) is a promising d-µSPE sorbent with excellent separation efficiency in addition to its high surface area and adsorption capability. In this work, two different surface-modified Mag-CNTs, Mag-CNTs-COOH and Mag-CNTs-SO3H, were developed to facilitate d-µSPE (Mag-CNTs/d-µSPE). The cyanide metabolite, 2-aminothiazoline-4-carboxylic acid (ATCA), was selected to evaluate their extraction performance using gas chromatography–mass spectrometry (GC–MS) analysis. The Mag-CNTs-COOH enabled a one-step derivatization/desorption approach in the workflow; therefore, a better overall performance was achieved. Compared to the Mag-CNTs-SO3H/d-µSPE and SPE workflow, the one-step desorption/derivatization approach improved the overall extraction efficiency and reduced solvent consumption and waste production. Both Mag-CNTs/d-µSPE workflows were validated according to ANSI/ASB 036 guidelines and showed excellent analytical performances. The limit of detection (LOD) and limit of quantitation (LOQ) of ATCA in synthetic urine were 5 and 10 ng/mL, respectively, and that in bovine blood were achieved at 10 and 60 ng/mL. The SPE method’s LOD and LOQ were also determined at 1 and 25 ng/mL in bovine blood samples. The Mag-CNTs/d-µSPE methods demonstrated great potential to extract polar and ionic metabolites from biological matrices. The extraction processes of ATCA described in this work can provide an easier-to-adopt procedure for potential routine forensic testing of the stable biomarker in cyanide poisoning cases, particularly for those cases where the cyanide detection window has passed.

Recent developments in sample preparation techniques combined with high-performance liquid chromatography: A critical review

This review article compares and contrasts sample preparation techniques coupled with high-performance liquid chromatography (HPLC) and describes applications developed in biomedical, forensics, and environmental/industrial hygiene in the last two decades. The proper sample preparation technique can offer valued data for a targeted application when coupled to HPLC and a suitable detector. Improvements in sample preparation techniques in the last two decades have resulted in efficient extraction, cleanup, and preconcentration in a single step, thus providing a pathway to tackle complex matrix applications. Applications such as biological therapeutics, proteomics, lipidomics, metabolomics, environmental/industrial hygiene, forensics, glycan cleanup, etc., have been significantly enhanced due to improved sample preparation techniques. This review looks at the early sample preparation techniques. Further, it describes eight sample preparation technique coupled to HPLC that has gained prominence in the last two decades. They are (1) solid-phase extraction (SPE), (2) liquid-liquid extraction (LLE), (3) gel permeation chromatography (GPC), (4) Quick Easy Cheap Effective Rugged, Safe (QuEChERS), (5) solid-phase microextraction (SPME), (6) ultrasonic-assisted solvent extraction (UASE), and (7) microwave-assisted solvent extraction (MWASE). SPE, LLE, GPC, QuEChERS, and SPME can be used offline and online with HPLC. UASE and MWASE can be used offline with HPLC but have also been combined with the online automated techniques of SPE, LLE, GPC, or QuEChERS for targeted analysis. Three application areas of biomedical, forensics, and environmental/industrial hygiene are reviewed for the eight sample preparation techniques. Three hundred and twenty references on the eight sample preparation techniques published over the last two decades (2001-2021) are provided. Other older references were included to illustrate the historical development of sample preparation techniques.

A new approach for microextraction of trace albendazole sulfoxide drug from the samples of human plasma and urine, and water by the molecularly imprinted polymer nanoparticles combined with HPLC

In this research study, a method of dispersive-micro-solid phase extraction (D-µ-SPE) combined with molecularly imprinted polymer nanoparticles (MIP-NPs) with HPLC-UV was developed for the fast and selective detection of the trace amount of albendazole sulfoxide (ABZSO) in the biological samples. To investigate the effective factors on ABZSO microextraction by the method, central composite design (CCD) was utilized, and the optimum conditions for ABZSO microextraction were sample pH of 8.0, MIP-mass of 15 mg, sonication time of 12 min, and eluent (methanol) volume of 0.25 mL. Under the obtained optimal extraction conditions, the value for the limit of detection (LOD) and limit of quantification (LOQ) was respectively showed to be 0.074 and 0.246 ng mL^-1. In addition, the calculated peak areas exhibited a linear relationship with the ABZSO concentration ranging from 0.4 to 4200 ng mL^-1. The analyses of the samples including human plasma and urine, and water were successfully performed by the usage of the D-µ-SPE method, which was a simple and sensitive technique and a suitable alternative for the analysis of ABZSO. In the analysis of ABZSO in various samples, the recoveries at various levels of ABZSO concentrations (50, 300, and 500 ng mL^-1) were in the range of 95.7-103.0 %, and the relative standard deviations (RSDs; n = 3) varied from 2.2 to 4.4%.

Amine-functionalized magnetic activated carbon as an adsorbent for preconcentration and determination of acidic drugs in environmental water samples using HPLC-DAD

In the present study, a convenient and highly effective method was developed for the quantification of acidic drugs in wastewater and river water samples. Ultrasonic-assisted magnetic solid phase extraction employing magnetic waste tyre-based activated carbon nanocomposite functionalized with [3-(2-aminoethylamino)propyl]trimethoxysilane as a cost-effective and efficient adsorbent was used for the extraction and preconcentration of acidic drugs (naproxen [NAP], ketoprofen (KET) and diclofenac [DIC]). The quantification of target analytes was achieved by high‐performance liquid chromatography with diode array detector. Under optimum conditions, the detection limit, quantification limit and relative standard deviation obtained for the analytes of interest ranged from 0.38 to 0.76, 1.26 to 2.54 µg L−1 and 2.02 to 4.06%, respectively. The applicability of the developed method was assessed by the spike recovery tests and the relative recoveries proved that the method is reliable for the determination of acidic drugs in wastewater. Thereafter, the method was applied successfully for the determination of NAP, KET and DIC in river water, influent and effluent wastewater.

Improved performance of 3D hierarchical NiAl-LDHs micro-flowers via a surface anchored ZIF-8 for rapid multiple-pollutants simultaneous removal and residues monitoring

In this paper, we report a new type of 3D ZIF-8@NiAl-LDHs micro-flowers material consisting of sandwich-like structured 2D nanopetals (highly compact ZIF-8 film anchored on both sides of petals). ZIF-8 was successfully incorporated into NiAl-LDHs (ZIF-8@NiAl-LDHs) via seeding strategy directed growth of ZIFs on the surface of LDHs nanopetals. The coating of ZIF-8 significantly increased the adsorption ability to organic pollutants and inorganic cation. 3D ZIF-8@NiAl-LDHs with excellent enrichment and filtration properties has been exploited for the application in water purification, and exhibit superior high adsorption rate and adsorption efficiency of organic (nonsteroidal anti-inflammatory drugs: ketoprofen, flurbiprofen, indometacin and ibuprofe; anionic dyes: congo red, orange g; cationic dyes: methylene blue, rhodamine b) and inorganic cation (Cu²⁺, Pb²⁺) residues due to their novel hierarchical and submicroscopic structures. Further, 3D ZIF-8@NiAl-LDHs as filter membrane to extraction four kind of trace anti-inflammatory drugs followed by direct quantification detection of targets with HPLC was demonstrated. The validated method was successfully applied for analysis of four anti-inflammatory drugs in environmental water and human urine samples. This work provided a feasible way to design and construct purification materials for wastewater treatment and contaminant detection.

Mixed Matrix Membrane Tip Extraction Coupled with UPLC–MS/MS for the Monitoring of Nonsteroidal Anti-Inflammatory Drugs in Water Samples

An ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method, in combination with a mixed matrix membrane microextraction method for the quantification of nonsteroidal anti-inflammatory drugs (NSAIDs) in environmental water samples, is reported. The extraction device was prepared by casting well-dispersed polymeric bonded octadecyl (C18) particles in a cellulose triacetate matrix solution onto commercially available 200 μL micropipette tips. The membrane formed contains 25% of the adsorbent loading amount and was firmly attached to the inner wall of the membrane tip. The dynamic extraction was performed by withdrawing and dispensing the sample solution through the tip device for effective analyte adsorption, followed by the analyte desorption process into 40 μL of methanol and acetonitrile (1:1) prior to UPLC–MS/MS analysis. NSAIDs—namely diclofenac, ibuprofen, indoprofen, naproxen and sulindac—were chosen as targeted analytes. Several extraction parameters were comprehensively optimized, including sample pH value, ionic strength, dynamic extraction cycle, desorption solvent and desorption time. The optimized conditions demonstrated a linear range from 0.25 to 500 ng L−1, with correlation coefficients (r2) from 0.9988 to 0.9992 and detection limits ranging from 0.08 to 0.40 ng L−1. The recoveries of the spiked water samples were between 92% and 99% and exhibited excellent precision relative to standard deviations (RSDs ≤ 4.9%), and enrichment factors (EFs) were at 201–249 for the developed approach.

Returning to Nature for the Design of Sorptive Phases in Solid-Phase Microextraction

Green analytical chemistry principles aim to minimize the negative impact of analytical procedures in the environment, which can be considered both at close (to ensure the safety of the analysts) and global (to conserve our natural resources) levels. These principles suggest, among other guidelines, the reduction/minimization of the sample treatment and the use of renewable sources when possible. The first aspect is largely fulfilled by microextraction, which is considered to be among the greenest sample treatment techniques. The second consideration is attainable if natural products are used as raw materials for the preparation of new extraction phases. This strategy is in line with the change in our production system, which is being gradually moved from a linear model (take–make–dispose) to a circular one (including reusing and recycling as key terms). This article reviews the potential of natural products as sorbents in extraction and microextraction techniques from the synergic perspectives of two research groups working on the topic. The article covers the use of unmodified natural materials and the modified ones (although the latter has a less green character) to draw a general picture of the usefulness of the materials.

Determination of cholecalciferol (vitamin D3) in bovine milk by dispersive micro-solid phase extraction based on the magnetic three-dimensional graphene-sporopollenin sorbent

In this research, a new magnetic sorbent material composed of three-dimensional graphene aerogel decorated with Fe₃O₄ nanoparticles attached to hollow sporopollenin exine capsules was synthesized and applied for extraction of vitamin D₃ before HPLC-UV analysis. The adsorbent was characterized by FT-IR, SEM, VSM, and zeta potential techniques. The important parameters of the extraction process, including adsorbent dosage, desorption conditions, adsorption time, pH, and salt concentration, were investigated. Under the optimized condition, the method analytical figures of merit were evaluated as follows: linear dynamic range, 10-500 μg L^-1; limit of detection, 3.01 μg L^-1; determination coefficient (R²), 0.9960; intra-day RSD, 5.28%; and inter-day RSD, 8.17%. The applicability of the method was assessed for the determination of vitamin D3 in different unfortified and fortified bovine milk samples, and the recoveries in the 71.8-113.3% range with the RSDs within 1.4-7.0% were obtained.

Current trends on microextraction by packed sorbent – fundamentals, application fields, innovative improvements and future applications

MEPS, the acronym of microextraction by packed sorbent, is a simple, fast and user- and environmentally-friendly miniaturization of the popular solid-phase extraction technique (SPE).