Composite imprinted macroporous hydrogels for haemoglobin purification from cell homogenate

Self-polymerization silica nanoparticles based molecularly imprinted polymers for selective recognition of protein

Molecularly imprinted polymers (MIPs) are promising for precise protein separation and purification. However, challenges persist due to their large size, variable configuration, and instability during preparation. Here, a simple silicon self-assembly program was designed to synthesize MIPs without any organic reagents and acid-base catalysis, avoiding the structural damage of protein under severe conditions. In this method, employing hemoglobin (Hb) as a model protein, with tween-20 in emulsification, and tetraethyl orthosilicate (TEOS) as the cross-linking agent, along with co-functional monomers 3-aminopropyltriethoxysilane (APTES) and benzyl(triethoxy)silane (BnTES), enhanced binding efficacy was achieved. Successful imprinting was evidenced through surface morphology observation and physical/chemical property evaluations of the synthesized MIPs. A series of adsorption experiments were performed to investigate the recognition performance of Hb-MIPs. The Hb-MIPs not only exhibited large adsorption capacity (400 μg/mg) and good imprinting factor (6.09) toward template protein, but also showed satisfactory selectivity for reference proteins. Five cycles of adsorption proved that the Hb-MIPs had good reusability. In addition, the successful isolation of HB from bovine blood indicated that Hb-MIPs were an excellent separation and purification material. The mild preparation conditions and good adsorption capacity demonstrated the potential value of this method in separation and purification research.

Carbon nitride reinforced chitosan/sodium alginate hydrogel as high-performance adsorbents for free hemoglobin removal in vitro and in vivo

Removing free hemoglobin generated during extracorporeal circulation remains a challenge. Currently, there is no adsorbent with specificity and good biosafety for removing hemoglobin. In this study, a new chitosan/sodium alginate/carbon nitride (CS/SA/C3N4) hydrogel adsorbent was prepared by blending SA with C3N4 to drop into CS/CaCl2 solution. The physicochemical properties of CS/SA/C3N4 hydrogel were evaluated using some techniques, including scanning electron microscope, Zeta potential measurement, and thermogravimetric analysis. Hemoglobin adsorption in vitro, stability, hemocompatibility, cell compatibility, inflammatory reaction and blood extracorporeal circulation in vivo were also evaluated. The findings revealed that the CS/SA/C3N4-0.4 % hydrogel exhibited an impressive adsorption capacity of 142.35 mg/g for hemoglobin. The kinetic data of hemoglobin adsorption were well-described by pseudo second-order model, while the isothermal model data conformed to the Langmuir model. The hardness and modulus of CS/SA/C3N4-0.4 % was 11.7 KPa and 94.66 KPa respectively, which indicated robust resistance to breakage. CS/SA/C3N4 demonstrated excellent hemocompatibility, biocompatibility and anti-inflammatory properties. In addition, the results of in vivo rabbit extracorporeal blood circulation experiment demonstrated that CS/SA/C3N4 could adsorb free hemoglobin from blood while maintaining high biosafety standard. Consequently, CS/SA/C3N4 hydrogel emerges as a promising candidate for use as a hemoglobin adsorbent in extracorporeal blood circulation system.

Cryogel with Modular and Clickable Building Blocks: Toward the Ultimate Ideal Macroporous Medium for Bacterial Separation

The lack of practical platforms for bacterial separation remains a hindrance to the detection of bacteria in complex samples. Herein, a composite cryogel was synthesized by using clickable building blocks and boronic acid for bacterial separation. Macroporous cryogels were synthesized by cryo-gelation polymerization using 2-hydroxyethyl methacrylate and allyl glycidyl ether. The interconnected macroporous architecture enabled high interfering substance tolerance. Nanohybrid nanoparticles were prepared via surface-initiated atom transfer radical polymerization and immobilized onto cryogel by click reaction. Alkyne-tagged boronic acid was conjugated to the composite for specific bacteria binding. The physical and chemical characteristics of the composite cryogel were analyzed systematically. Benefitting from the synergistic, multiple binding sites provided by the silica-assisted polymer, the composite cryogel exhibited excellent affinity toward S. aureus and Salmonella spp. with capacities of 91.6 × 107 CFU/g and 241.3 × 107 CFU/g in 0.01 M PBS (pH 8.0), respectively. Bacterial binding can be tuned by variations in pH and temperature and the addition of monosaccharides. The composite was employed to separate S. aureus and Salmonella spp. from spiked tap water, 40% cow milk, and sea cucumber enzymatic hydrolysate, which resulted in high bacteria separation and demonstrated remarkable potential in bacteria separation from food samples.

Molecularly Imprinted Polymers with Shape-Memorable Imprint Cavities for Efficient Separation of Hemoglobin from Blood

Efficient separation and purification of hemoglobin from blood and other complicated biological fluids still remains a big challenge. Molecularly imprinted polymers (MIPs) of hemoglobin are potential choices; however, they suffer from severe problems including difficult template removal and low imprinting efficiency like other protein-imprinted polymers. Herein, a novel MIP of bovine hemoglobin (BHb) was designed in which a peptide crosslinker (PC), instead of the commonly used crosslinkers, was used. The PC, a random copolymer of lysine and alanine, adopts an α-helical conformation at pH 10 but transits to a random coil conformation at pH 5. The introduction of alanine residues lowers the pH range at which the PC undergoes helix-coil transition. The imprint cavities in the polymers are shape-memorable due to the reversible and precise helix-coil transition of the peptide segments in the polymers. They can be enlarged by lowering pH from 10 to 5, thus allowing complete removal of the template protein under mild conditions. When the pH is adjusted back to 10, their original size and shape will be recovered. Therefore, the MIP binds the template protein BHb with high affinity. Compared with the MIP crosslinked with the commonly used crosslinker, the imprinting efficiency of the PC-crosslinked MIP is significantly improved. In addition, both the maximum adsorption capacity (641.9 mg/g) and imprinting factor (7.2) are much higher than the BHb MIPs reported previously. The new BHb MIP also exhibits high selectivity toward BHb and good reusability. Thanks to the high adsorption capacity and high selectivity of the MIP, when it was applied to extract BHb from bovine blood, BHb in the blood sample was extracted almost completely, and high purity product was obtained.

Preparation of nickel-chelated iminodiacetate-functionalized macroporous agarose monolith using modular and clickable building blocks for affinity separation of histidine-tagged recombinant proteins

Selective separation and purification of protein from complex medium is required to completely investigate the structure and function of the target protein. In this study, a composite macroporous agarose monolith containing iminodiacetate-chelated Ni²⁺ ligands was synthesized for selective separation and purification of histidine-tagged recombinant proteins. The large and interconnected pores in the monolith enabled fast binding of proteins with high matrix tolerance in treating complex mediums. To realize the selective protein binding, the iminodiacetate was directly conjugated to epoxy-functionalized agarose monolith via simple chemical reactions between epoxy and imino groups. After chelated Ni²⁺, the composite monolith could bind histidine-tagged recombinant proteins through the coordination interaction between transition metal ions and the imidazole ring of histidine. To further increase the binding capacities of the monolith, a hydrophilic intermediate polymer chain containing multiple iminodiacetate immobilization sites was conjugated to the azide-functionalized agarose monolith via Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The morphology and chemical composition of the composite agarose monolith were characterized systematically. The protein binding capacities of the obtained composite agarose monolith were subsequently investigated. The binding capacities of the composite agarose monolith towards the model proteins Gp10 and Lys84 were 0.93 and 0.51 mg/mL, respectively. The protein binding of the composite agarose monolith could be manipulated by adjusting the temperature and concentrations of imidazole. These results demonstrate that the composite agarose monolith could be used as an affinity medium for rapid separation and purification of histidine-tagged recombinant proteins from biological samples.

Rapid Separation of Human Hemoglobin on a Large Scale From Non-clarified Bacterial Cell Homogenates Using Molecularly Imprinted Composite Cryogels

The production of a macroporous hydrogel column, known as cryogel, has been scaled up (up to 150 mL) in this work for the purification of human hemoglobin from non-clarified bacterial homogenates. Composite cryogels were synthesized in the presence of adult hemoglobin (HbA) to form a molecularly imprinted polymer (MIP)network where the affinity sites for the targeted molecule were placed directly on an acrylamide cryogel by protein imprinting during the cryogelation. The MIP composite cryogel column was first evaluated in a well-defined protein mixture. It showed high selectivity toward HbA in spite of the presence of serum albumin. Also, when examined in complex non-clarified E. coli cell homogenates, the column showed excellent chromatographic behavior. The binding capacity of a 50 mL column was thus found to be 0.88 and 1.2 mg/g, from a protein mixture and non-clarified cell homogenate suspension, respectively. The recovery and purification of the 50 mL column for separation of HbA from cell suspension were evaluated to be 79 and 58%, respectively. The MIP affinity cryogel also displayed binding and selectivity toward fetal Hb (HbF) under the same operational conditions.

Water-soluble polymeric particle embedded cryogels: Synthesis, characterisation and adsorption of haemoglobin

Making cryogels, which are among today’s accepted adsorbents, more functional with different methods, has been one of the subjects spent overtime. In this study, water-soluble poly(maleic anhydride-alt-acrylic acid) polymer embedded in poly(2-hydroxyethyl methacrylate) cryogels. Copper ions were then immobilised to this structure, and this polymer was used for adsorption of haemoglobin from aqueous systems. Adsorption interaction was carried out on an electrostatic basis, and approximately 448.62 mg haemoglobin/g polymer adsorption capacity value was obtained. It was found that the same material has managed to maintain its adsorption ability by 90.3% even after the use of it five times in the adsorption/desorption cycle. The adsorption interaction was determined to be appropriate for the Langmuir model by isotherm studies. The change in Gibbs free energy value was calculated as −2.168 kJ/mol.

Synthesizing a Hybrid Nanocomposite as an Affinity Adsorbent through Surface-Initiated Atom Transfer Radical Polymerization Catalyzed by Myoglobin

A hybrid bifunctional core-shell nanostructure was synthesized for the first time via surface-initiated atom transfer radical polymerization (SI-ATRP) using myoglobin as a biocatalyst (ATRPase) in an aqueous solution. N-Isopropyl acrylamide (NIPA) and N-(3-aminopropyl)methacrylamide (APMA) were applied to graft flexible polymer brushes onto initiator-functionalized silica nanoparticles. Two different approaches were implemented to form the core-shell nanocomposite: (a) random copolymerization, Si@p(NIPA-co-APMA) and (b) sequential block copolymerization, Si@pNIPA-b-pAPMA. These nanocomposites can be used as versatile intermediates, thereby leading to different types of materials for targeted applications. In this work, a phenylboronic acid ligand was immobilized on the side chain of the grafted brushes during a series of postmodification reactions to create a boronate affinity adsorbent. The ability to selectively bind glycoproteins (ovalbumin and glycated hemoglobin) via boronic acid was assessed at two different temperatures (20 and 40 °C), where Si@pNIPA-b-APMA_BA (163 mg OVA/g of particle) displayed an approximately 1.5-fold higher capacity than Si@p(NIPA-co-APMA)_BA (107 mg OVA/g of particle). In addition to selective binding to glycoproteins, the nanocomposites exhibited selective binding for myoglobin due to the molecular imprinting effect during the postmodification process, that is, 72 and 111 mg Mb/g for Si@p(NIPA-co-APMA)_BA and Si@pNIPA-b-pAPMA_BA, respectively.

Preparation of Boronic Acid-Functionalized Cryogels Using Modular and Clickable Building Blocks for Bacterial Separation

Composite cryogels containing boronic acid ligands are synthesized for effective separation and isolation of bacteria. The large and interconnected pores in cryogels enable fast binding and release of microbial cells. To control bacterial binding, an alkyne-tagged boronic acid ligand is conjugated to azide-functionalized cryogel via the Cu(I)-catalyzed azide-alkyne cycloaddition reaction. The boronic acid-functionalized cryogel binds Gram-positive and Gram-negative bacteria through reversible boronate ester bonds, which can be controlled by pH and simple monosaccharides. To increase the capacity of affinity separation, a new approach is used to couple the alkyne-tagged phenylboronic acid to cryogel via an intermediate polymer layer that provides multiple immobilization sites. The morphology and chemical composition of the composite cryogel are characterized systematically. The capability of the composite cryogel for the separation of Gram-positive and Gram-negative bacteria is investigated. The binding capacities of the composite cryogel for Escherichia coli and Staphylococcus epidermidis are 2.15 × 10⁹ and 3.36 × 10⁹ cfu/g, respectively. The bacterial binding of the composite cryogel can be controlled by adjusting pH. The results suggest that the composite cryogel may be used as affinity medium for rapid separation and isolation of bacteria from complex samples.

Surface-imprinted silica particles for Concanavalin A purification from Canavalia ensiformis

Concanavalin A is a representative of the plant protein group known as lectins. Many lectin proteins have useful characteristics for studies on cell division and cell surfaces. In this study, a new adsorbent for the specific separation of Concanavalin A was prepared by applying a silica particle surface imprinting method. First, silica particles were activated via acidic treatment, and then, 3-methacryloyloxypropyl trimethoxysilane (MPTMS) was used for modification. For the preparation of Concanavalin A surface-imprinted silica particles (Con A-MISPs), N-methacryloyl-l-histidine methyl ester (MAH) was used as a functional monomer. The silica particles were characterized using a Zetasizer, scanning electron microscopy equipment (SEM), and Fourier transform infrared spectroscopy (FTIR). The effects of parameters such as the pH, initial concentration of Concanavalin A, and temperature on the adsorption of Concanavalin A were determined. The maximum Concanavalin A adsorption onto Con A-MISPs was observed to be 305.2 mg/g at a pH of 6. The reusability of the Con A-MISPs was approximately 93.5%. The non-imprinted silica particles (NISPs) were prepared in the same manner without Concanavalin A to compare the surface imprinting factor. Selective binding studies were carried out with lysozyme and hemoglobin molecules. The selectivity of the Con A-MISPs was also investigated by isolating Concanavalin A from Canavalia ensiformis. The purity of the Concanavalin A was shown by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE).

Supermacroporous Composite Cryogels in Biomedical Applications

Supermacroporous gels, called cryogels, are unique scaffolds that can be prepared by polymerization of monomer solution under sub-zero temperatures. They are widely used in many applications and have significant potential biomaterials, especially for biomedical applications due to their inherent interconnected supermacroporous structures and easy formation of composite polymers in comparison to other porous polymer synthesis techniques. This review highlights the fundamentals of supermacroporous cryogels and composite cryogels, and then comprehensively summarizes recent studies in preparation, functionalization, and utilization with mechanical, biological and physicochemical features, according to the biomedical applications. Furthermore, conclusions and outlooks are discussed for the use of these promising and durable supermacroporous composite cryogels.

O-carboxymethyl chitosan Schiff base complexes as affinity ligands for immobilized metal-ion affinity chromatography of lysozyme

We synthesized Ni²⁺-attached O-Carboxymethyl chitosan Schiff base complexes embedded composite cryogels (Ni²⁺-O-CMCS-CCs) by means of polymerization of gel-forming precursors at subzero temperatures. Prepared affinity cryogel showed excellent adsorption performance for lysozyme selected as model protein to test adsorption parameters, demonstrating an adsorption capacity of 244.6 mg/g (15.3 mg/g for Ni²⁺ minus O-CMCS-CCs), with fast adsorption equilibrium within 30 min and good reversibility. The performance of Ni²⁺-O-CMCS-CCs for lysozyme was also evaluated by SDS-PAGE, and a purification efficiency of 86.9% with 89.5% purification yield was determined. The swelling test, FT-IR, and SEM analysis were carried out for the characterization of Ni²⁺-O-CMCS-CCs. At the end of 35 adsorption-desorption cycles, there was no significant change in the adsorption capacity.