An effective strategy for controlled fabrication and self-assembled modification of template-supported silica nanosheets on a superelastic nickel-titanium alloy fiber for highly efficient solid-phase microextraction

Trace-level detection of sulfonamide antibiotics using quaternary ammonium polymeric ionic liquid-based effervescence-enhanced dispersive solid-phase extraction followed by LC-DAD analysis in environmental waters

Conventional ionic liquids possess several disadvantages, such as high viscosity, difficult sampling/retrieval, and great loss in aqueous solution, limiting their wide applications in the pretreatment field. To solve these drawbacks, we synthesized a quaternary ammonium polymeric ionic liquid (PIL) and pressed it into an effervescent tablet for developing an effervescence-enhanced dispersive solid-phase extraction method (QAP-EDSE). The pressed effervescent tablet was composed of PIL as an extractant, tartaric acid as an acidic source, NaHCO₃ as an alkaline source, and water-soluble starch as a filler, respectively. Under the CO₂-driven dispersion, the QAP-EDSE method integrated rapid enrichment, extraction, and dispersion into one synchronous step. Employing the one-factor-at-a-time approach, several important variables were optimized as follows: 200 mg of P[VBTHEA]Cl as sorbent, 400 μL of acetone as elution solvent, 5 min of elution, solution pH 9.0, and 1 : 1.25 molar ratio of alkaline to acidic sources. Combining LC-DAD analysis, this proposed approach offered the limits of detection as low as 0.11–0.31 μg L⁻¹ and satisfactory recoveries of 81.40–102.62% for five sulfonamides (SAs) in environmental waters. The lower relative standard deviations (1.9–6.7%) evidenced the higher intraday and interday experimental precision by this method. Overall, the newly developed method is environmentally benign, time-saving, and easy to operate with low detection limit and high recovery and thus shows excellent prospects in the trace-level detection of SAs in environmental waters.

An effervescent tablet-assisted dispersive solid-phase extraction based on the utilization of quaternary ammonium poly ionic liquids (PIL) was proposed for the concentration/extraction of sulfonamides (SAs) in river and lake water samples.

Modulating the selectivity of solid-phase microextraction fibers based on morphological, compositional, and size-depended control of bimetallic oxide nanostructures grown on nickel-titanium alloy substrates

Nickel-titanium oxide nanotubes (NiTiONTs), nanoparticles, and nanopores were in situ grown on NiTi fiber substrates by controlling anodization parameters. The adsorption performance of different bimetallic oxide nanostructures was evaluated using typical aromatic compounds including chlorophenols, phthalic acid esters, ultraviolet filters (UVFs), and polycyclic aromatic hydrocarbons (PAHs) coupled to HPLC-UV. The results clearly indicate that these NiTiO nanostructures show good extraction capability for UVFs and PAHs. The extraction performance of UVFs and PAHs greatly depends on the surface morphologies and sizes of the grown NiTiO nanostructures along with their elemental compositions. Compared with NiTiO nanoparticle and nanopore coatings, the longer well-aligned NiTiONT coating exhibits better extraction capability and selectivity for PAHs than for UVFs. Therefore, the extraction parameters of the NiTi@NiTiONT fiber for PAHs were investigated and optimized. Under optimized conditions, the proposed method was linear in the range 0.05-200 μg L^-1 with correlation coefficients above 0.999. Limits of detection were between 0.008 and 0.124 μg L^-1. Relative standard deviations (RSDs) of the intra-day and the inter-day analyses with the single fiber varied from 4.09 to 6.33%. RSDs for fiber-to-fiber reproducibility of the proposed method with five fibers prepared in different batches were between 5.75 and 7.43%. The applicability of the proposed method was investigated by the enrichment and determination of target PAHs in environmental water samples and relative recoveries of 84.5 ± 6.5 - 116 ± 7.8% were achieved. Notably, the prepared fiber was stable up to 250 times. Graphical abstract.

Determination of Volatile Water Pollutants Using Cross-Linked Polymeric Ionic Liquid as Solid Phase Micro-Extraction Coatings

Ionic liquids found a wide application in catalysis and extraction due to their unique properties. Herein, ethylene glycol dimethacrylate as the cross-linker and 1-vinyl-3- butylimidazolium tetrafluoroborate as functional monomer via thermally initiated free-radical polymerization was prepared as a novel copolymer solid phase micro-extraction (SPME) coating. A surface modified stainless-steel wire was implemented as the substrate. Factors affecting the extraction performances of the copolymer, including the molar ratio of monomers to cross-linkers, the amount of porogen agent, and polymerization time were evaluated and optimized. To evaluate the extraction performance, five commonly seen polycyclic aromatic hydrocarbons (PAHs) were taken as the analytical targets. The potential factors affecting extraction efficiency were optimized. The as-prepared SPME device, coupled with gas chromatography, was successfully applied for the determination of PAHs in water samples. The wide linear range, low detection limit, good reproducibility, selectivity, and excellent thermal stability indicate the promising application of the newly developed SPME fiber in environmental monitoring as well as in other samples having complex matrices.