In-situ growth of zeolitic imidazole framework-67 on nanoporous anodized aluminum bar as stir-bar sorptive extraction sorbent for determining caffeine

Synthesized of a novel xanthate functionalized polypropylene as adsorbent for dispersive solid phase microextraction of caffeine using orbital shaker in mixed beverage matrices

A newly synthesized xanthate functionalized chlorinated polypropylene (PP-Xa) was used as adsorbent for the orbital shaker based on dispersive solid phase microextraction (OS-DSPME) of caffein from several tea, coffee, energy drink, coca-cola and chocolate samples using UV-vis. spectrophotometer. Synthesized PP-Xa was characterized using Fourier Transform Infrared spectroscopy (FTIR-ATR) and nuclear magnetic resonance spectroscopy (¹H NMR). Various parameters like pH, PP-Xa amount, extraction time, type of eluent and its volume were optimized. Linear range, detection limit (LOD), limit of quantification (LOQ), relative standard deviation (RSD), recovery values, and enrichment factor (EF) were found 90-1000 μgL^-1, 27.3 µg L^-1, 90 µg L^-1, 1.9-2.6%, 98 ± 2%, and 167, respectively. Adsorption capacity of PP-Xa was found 271.9 mg g^-1. Standard addition and reference method were used for confirm the accuracy of present method.

In situ growth of copper-based metal-organic framework on a helical shape copper wire as a sorbent in stir-bar sorptive extraction of fenthion followed by corona discharge ion mobility spectrometry

In this paper, a helical copper wire, coated with copper-benzene-1,4-dicarboxylic acid metal-organic framework (Cu-BDC) was used as a sorbent for stir-bar sorptive extraction of fenthion from water and fruit samples. The homogenous coating was fabricated through two simple and fast steps. The chemical conversion of copper substrate to copper hydroxide nanotubes (Cu(OH)₂ NTs) was performed in an alkaline solution and then Cu-BDC was formed through a neutralization reaction. Corona discharge ion mobility spectrometry in positive mode was applied for the detection of fenthion. To improve the sensitivity of the method, some synthesis and extraction parameters affecting the extraction efficiency such as benzene-1,4-dicarboxylic acid concentration, ionic strength, sample pH, stirring rate, extraction temperature, and extraction time were investigated. The linear dynamic range between 0.5 and 80 μg L^-1 and detection limit of 0.1 μg L^-1 were obtained under optimal conditions. The intra- and inter-day relative standard deviations were less than 6.4 and 8.6%, respectively. The applicability of the method was examined for the analysis of different samples (i.e., well water, agricultural wastewater, and orange). The recovery for the determination of fenthion in spiked samples varied from 88 to 111%.

Recent applications of microextraction sample preparation techniques in biological samples analysis

Analysis of biological samples is affected by interfering substances with chemical properties similar to those of the target analytes, such as drugs. Biological samples such as whole blood, plasma, serum, urine and saliva must be properly processed for separation, purification, enrichment and chemical modification to meet the requirements of the analytical instruments. This causes the sample preparation stage to be of undeniable importance in the analysis of such samples through methods such as microextraction techniques. The scope of this review will cover a comprehensive summary of available literature data on microextraction techniques playing a key role for analytical purposes, methods of their implementation in common biological samples, and finally, the most recent examples of application of microextraction techniques in preconcentration of analytes from urine, blood and saliva samples. The objectives and merits of each microextration technique are carefully described in detail with respect to the nature of the biological samples. This review presents the most recent and innovative work published on microextraction application in common biological samples, mostly focused on original studies reported from 2017 to date. The main sections of this review comprise an introduction to the microextraction techniques supported by recent application studies involving quantitative and qualitative results and summaries of the most significant, recently published applications of microextracion methods in biological samples. This article considers recent applications of several microextraction techniques in the field of sample preparation for biological samples including urine, blood and saliva, with consideration for extraction techniques, sample preparation and instrumental detection systems.

Fabrication of carboxyl functionalized microporous organic network coated stir bar for efficient extraction and analysis of phenylurea herbicides in food and water samples

Fabrication of novel coatings continues to be an area of great interest and significance in the development and application of stir bar sorptive extraction (SBSE). In this work, a carboxyl-enriched microporous organic network (MON-2COOH) coated stir bar was designed and fabricated as a novel adsorbent for efficient extraction of four phenylurea herbicides (PUHs) before their determination by high-performance liquid chromatography coupled with photodiode array detector (HPLC-PDA). The MON-2COOH was represented as an effective adsorbent for PUHs due to its large surface area, rigid porous structure, aromatic pore walls and the desired hydrogen bonding sites of introduced carboxyl groups. Variables affecting the SBSE of target analytes were optimized in detail. Under the optimal extraction conditions, favorable correlation coefficients (R² > 0.996) in the linear range 0.10-250 μg L^-1, low limits of detection (LODs, S/N = 3) of 0.025-0.070 μg L^-1 and good enrichment factors (46-49) were obtained. Besides, the proposed SBSE-HPLC-PDA method was successfully applied to determine trace PUHs in food and environmental water samples with recoveries in the range of 80.0-104.8% and the precisions (relative standard deviations, RSDs) lower than 9.9% (n = 3). This work revealed the potential of MONs in SBSE of trace contaminants from environmental samples.

Zeolitic imidazolate frameworks in analytical sample preparation

Zeolitic imidazolate frameworks are a class of metal-organic frameworks that are topologically isomorphic with zeolites. Zeolitic imidazolate frameworks are composed of tetrahedrally coordinated metal ions connected by imidazolate linkers and have a high porosity and chemical stability. Here, we summarize the progress made in the application of zeolitic imidazolate frameworks in sample preparation for analytical purposes. This review is focused on analytical methods based on liquid chromatography, gas chromatography, or capillary electrophoresis, where the use of zeolitic imidazolate frameworks has contributed to increasing the sensitivity and selectivity of the method. While bulk zeolitic imidazolate frameworks have been directly used in analytical sample preparation protocols, a variety of strategies for their magnetization or their incorporation into sorbent particles, monoliths, fibers, stir bars, or thin films, have been developed. These modifications have facilitated the handling and application of zeolitic imidazolate frameworks for a number of analytical sample treatments including magnetic solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, or thin film microextraction, among other techniques.

Stir bar sorptive extraction and its application

Recent progress of stir bar sorptive extraction (SBSE) in the past six years is reviewed. The preparation methods including electrodeposition, self-assembly, solvent exchange, physical magnetic adsorption and electrostatic spinning, for the coated stir bar are summarized and compared, specifically for a specific material for coatings fabrication, e.g., carbon-based materials and metal organic frameworks. The emerging materials (e.g., graphene, graphene oxide, carbon nanotubes, monolith, metal-organic frameworks and porous organic polymers) applied for coated stir bar fabrication are one of the focus of this review, along with their respective advantages in extraction process and application in trace analysis. The development and application of extraction apparatus of SBSE are also involved. Based on these information, the development status and prospects of SBSE as an efficient sample pretreatment technique in real sample analysis are discussed.

Hierarchical zeolitic imidazolate framework-67 derived from in-situ synthesized CO-Al layered double hydroxide embedded within porous-anodized aluminum foil for thin film microextraction of caffeine followed by its high performance liquid chromatography-ultraviolet detection

In this study, the in-situ conversion of the synthesized Co-Al layered double hydroxide (Co-Al LDH) nanosheets to three dimensional hierarchical zeolitic imidazolate framework-67 (3D HZIF-67) was presented as a cost-effective, highly efficient, flexible and robust sorbent to carry out the microextraction process. In the first stage, the anodized aluminum foil was prepared electrochemically. Then, the Co-Al LDH precursor was constructed on the surface of the previously-prepared anodized Al foil applying in-situ formation approach. The procedure is followed by the conversion of the prepared Co-Al LDH film to 3D HZIF-67 film via a facile solvothermal method without adding cobalt salt. The in-situ prepared 3D HZIF-67-anodized Al was used for the thin film microextraction (TFME) of caffeine. The effective factors in TFME procedure were investigated and optimized through applying Central Composite Design (CCD). In the obtained optimal condition, the calibration curves for TFME-HPLC-UV of caffeine were linear in the range of 1-200 µg L^-1 with the coefficient of determination (r²) higher than 0.9915. The limits of detection were 0.33 and 0.38 µg L^-1, in water and urine matrices, respectively. Moreover, the enrichment factors (EFs) and absolute recoveries (%AR) were also calculated as 173-198 and 57.1%-65.3%, respectively. The inter-day relative standard deviations (RSDs) were evaluated as the method precision for 20 and 200 µg L^-1 of spiked sample and were between 4.9-6.1%. The repeatability of the preparation step was investigated as batch-to-batch reproducibility and it was found to be 4.9%; as a result, the reproducibility of the presented film was approved. Finally, the proposed method was utilized to determine caffeine (as the model analyte) from different types of real samples including urine, coffee, beverage (Pepsi) and shampoo. The obtained recoveries (higher than 88%) confirmed the capability of the method for real sample analysis.

Metal–Organic Frameworks as Key Materials for Solid-Phase Microextraction Devices—A Review

Metal–organic frameworks (MOFs) have attracted recently considerable attention in analytical sample preparation, particularly when used as novel sorbent materials in solid-phase microextraction (SPME). MOFs are highly ordered porous crystalline structures, full of cavities. They are formed by inorganic centers (metal ion atoms or metal clusters) and organic linkers connected by covalent coordination bonds. Depending on the ratio of such precursors and the synthetic conditions, the characteristics of the resulting MOF vary significantly, thus drifting into a countless number of interesting materials with unique properties. Among astonishing features of MOFs, their high chemical and thermal stability, easy tuneability, simple synthesis, and impressive surface area (which is the highest known), are the most attractive characteristics that makes them outstanding materials in SPME. This review offers an overview on the current state of the use of MOFs in different SPME configurations, in all cases covering extraction devices coated with (or incorporating) MOFs, with particular emphases in their preparation.

Metal-Organic Frameworks in Green Analytical Chemistry

Metal-organic frameworks (MOFs) are porous hybrid materials composed of metal ions and organic linkers, characterized by their crystallinity and by the highest known surface areas. MOFs structures present accessible cages, tunnels and modifiable pores, together with adequate mechanical and thermal stability. Their outstanding properties have led to their recognition as revolutionary materials in recent years. Analytical chemistry has also benefited from the potential of MOF applications. MOFs succeed as sorbent materials in extraction and microextraction procedures, as sensors, and as stationary or pseudo-stationary phases in chromatographic systems. To date, around 100 different MOFs form part of those analytical applications. This review intends to give an overview on the use of MOFs in analytical chemistry in recent years (2017–2019) within the framework of green analytical chemistry requirements, with a particular emphasis on possible toxicity issues of neat MOFs and trends to ensure green approaches in their preparation.