A polyvinyl alcohol-coated core-shell magnetic nanoparticle for the extraction of aminoglycoside antibiotics residues from honey samples

Advances in magnetic analytical extraction techniques for detecting antibiotic residues in edible samples

The widespread use of antibiotics in agricultural and animal husbandry to treat bacterial illnesses has resulted in a rise in antibiotic-resistant bacteria. These bacteria can grow when antibiotic residues are present in food items, especially in edible animal products. As a result, it is crucial to monitor and regulate the amounts of antibiotics in food. Magnetic analytical extractions (MAEs) have emerged as a potential approach for extracting antibiotic residues from food using magnetic nanoparticles (MNPs). Recent improvements in MAEs have resulted in the emergence of novel MNPs with better selectivity and sensitivity for the extraction of antibiotic residues from food samples. Consequently, this review paper addresses current developments in MAE for extracting antibiotic residues from edible samples. It also provides a critical analysis of contemporary MAE practices. The current issues and potential future developments in this field are also discussed, thereby providing a framework for future study paths.

Exploring the potentialities of a biodegradable polymeric film in sample preparation: An optimized "white" protocol to extract and quantify emerging contaminants in water

BACKGROUND

The introduction of white analytical chemistry encourages the development of methods characterized by a balance among greenness, productivity/feasibility and analytical performances. In the environmental analysis of emerging contaminants (ECs), for which high sensitivity and specificity are mandatory, the use of green and sustainable sample preparation needs to be coupled to a reliable analytical determination. Herein, an extraction method based on the use of a biodegradable polymeric film (Mater-Bi) and coupled to LC-MS/MS analysis was developed for the sensitive determination of ECs in wastewater.

RESULTS

The interaction among a range of ECs and the Mater-Bi film (a commercially available patented blend of polybutylene-terephthalate, starch and fatty acids) was investigated by two sequential experimental designs, to simultaneously study several factors and optimize extraction efficiency. The final method, resembling a fabric phase sorptive extraction, involved pH and ionic strength modification of the sample, 1h extraction and desorption in ethanol. Satisfactory recoveries from real wastewater were obtained for sixteen analytes (56-116 %), as well as excellent precision (inter-day relative standard deviations below 10 % for most compounds). Matrix effect was in the range 88-116 % at the lower pre-concentration factor, but also acceptable in most cases at the higher pre-concentration factor. LODs in matrix, from 0.004 to 0.159 μg L-1, were lower than or comparable to those from recent studies employing green extraction procedures. The method demonstrated its applicability to samples from wastewater treatment plants, allowing quantification of pharmaceuticals and UV filters at the μg L-1 and ng L-1 levels, respectively.

SIGNIFICANCE

For the first time, the synthetic biopolymer Mater-Bi, so far unexplored for the use in analytical chemistry, was exploited for a green, simple and extremely cheap extraction protocol. The optimized method is suitable for several ECs, guaranteeing very good accuracy, precision and specificity, also thanks to the LC-MS/MS analysis. The evaluation by green and white analytical chemistry metrics highlighted its superiority to conventional extraction methods.

Rapid multi-residue LC-MS/MS determination of nitrofuran metabolites, nitroimidazoles, amphenicols, and quinolones in honey with ultrasonic-assisted derivatization - magnetic solid-phase extraction

A rapid multi-residue LC-MS/MS method for the identification and determination of banned veterinary drugs in honey was developed. A total of 31 investigated veterinary drugs belonging to 4 classes including nitrofurans metabolites, nitroimidazoles, amphenicols, and quinolones were quantified by LC-MS/MS with ESI using one single injection. The sample preparation included treatment with 5-nitro-2-furaldehyde (5-NFA) in a thermostated ultrasonic bath (80 °C, 0.5М НСl, 20 min) to liberate matrix-bound residues of nitrofurans. Magnetic hypercrosslinked polystyrene (HCP/Fe3O4) was proposed for the solid-phase extraction and clean-up of target analytes prior to LC-MS/MS analysis. To evaluate and validate the performance of method, the criteria of the Decision (EC) no 2002/657 were applied. The LOQs of the examined analytes range from 0.3 to 1 μg kg-1, which indicates good sensitivity to quantify the target compounds in honey. The recoveries of veterinary drugs from 1 g of honey with 50 mg of the sorbent are 97-109% for nitrofuran metabolites, 84-115% for nitroimidazoles, 86-103% for amphenicols, and 97-118% for quinolones. The relative standard deviations of intra-day and inter-day precision analyses (RSD) are less than 16%. This methodology was applied to real honey samples and trace levels of some veterinary drugs were detected.

Residue analysis of 10 aminoglycoside antibiotics in aquatic products by multiwalled carbon nanotubes combined with mixed-mode ion exchange liquid chromatography-tandem mass spectrometry

An ultra-high-performance liquid chromatography-tandem mass spectrometry method was developed for simultaneous determination of 10 kinds of aminoglycosides in edible parts of aquatic products. The samples were extracted with 10 mmol/L potassium dihydrogen phosphate buffer solution, then the pH value of the extract was adjusted to neutral by sodium hydroxide. Half volume of the extract was loaded onto multiwalled carbon nanotubes cartridge. All the target compounds were separated on a mixed-mode ion exchange column and detected by ultra-high-performance liquid chromatography-tandem mass spectrometry with electrospray in the positive ionization mode. Under optimized conditions, this method had a good linearity with a squared correlation coefficient > 0.999. For neomycin, the limit of detection and limit of quantification were 5.0 μg/kg and 10.0 μg/kg, respectively; for hygromycin B and apramycin, values were 2.0 μg/kg and 5.0 μg/kg, respectively; for the other seven kinds of aminoglycosides, values were 1.0 μg/kg and 2.0 μg/kg, respectively. The average recoveries presented 75.8%-107.2% with intra- and interday reproducibility ranging between 3.8% and 12.5%. The method was rapid with good separation and sharp peak shapes, had the characteristicsis of high accuracy and good precision, and was suitable for simultaneous determination of 10 kinds of aminoglycosides in aquatic products.

Polyvinyl alcohol electrospun nanofiber membrane based solid-phase extraction for monitoring administered aminoglycoside antibiotics in various animal-derived foods

This work aims to develop a widely applicable method to monitor administered AGs in various animal-derived food samples to ensure food safety. A polyvinyl alcohol electrospun nanofiber membrane (PVA NFsM) was synthesized and employed as solid-phase extraction (SPE) sorbent, in combination with UPLC-MS/MS, for the simultaneous detection of ten AGs in nine types of animal-derived food samples. PVA NFsM exhibited excellent adsorption performance for the targets (with an adsorption rate of over 91.09%), good matrix purification ability (with a reduction of 7.65%-77.47% in matrix effect after SPE), and good recyclability (can be reused 8 times). The method displayed a linear range of 0.1-25000 μg/kg and attained limits of detection for AGs were 0.03-15 μg/kg. Spiked samples demonstrated a recovery of 91.72%-100.04% with a precision of<13.66%. The practicality of the developed method was verified by testing multiple actual samples.

Clickable polymer scaffolds enable Ce recovery with peptide ligands

Rare earth elements (REEs) are a vital part of many technologies with particular importance to the renewable energy sector and there is a pressing need for environmentally friendly and sustainable processes to recover and recycle them from waste streams. Functionalized polymer scaffolds are a promising means to recover REEs due to the ability to engineer both transport properties of the porous material and specificity for target ions. In this work, REE adsorbing polymer scaffolds were synthesized by first introducing poly(glycidyl methacrylate) (GMA) brushes onto porous polyvinylidene fluoride (PVDF) surface through activator generated electron transfer atom transfer radical polymerization (AGET ATRP). Azide moieties were then introduced through a ring opening reaction of GMA. Subsequently, REE-binding peptides were conjugated to the polymer surface through copper catalyzed azide alkyne cycloaddition (CuAAC) click chemistry. The presence of GMA, azide, and peptide was confirmed through Fourier transform infrared spectroscopy. Polymer scaffolds functionalized with the REE-binding peptide bound cerium, while polymer scaffolds functionalized with a scrambled control peptide bound significantly less cerium. Importantly, this study shows that the REE binding peptide retains its functionality when bound to a polymer surface. The conjugation strategy employed in this work can be used to introduce peptides onto other polymeric surfaces and tailor surface specificity for a wide variety of ions and small molecules.

An Aptamer Affinity Column for Extraction of Four Aminoglycoside Antibiotics from Milk

This article introduces the aptamer affinity column (AAC) with nucleic acid aptamer as an affinity ligand for the extraction of four aminoglycoside antibiotics (AGs). The AAC was prepared by loading the aptamer functionalized Sepharose into an extraction column, which was conjugated by covalent binding between NHS-activated Sepharose and amino-modified aptamers with a coupling time of 2 h. After the sample solution flowed through the AAC, the AGs were retained because of the affinity between the AGs and aptamer, then AGs were eluted and analyzed by UPLC-MS/MS. Under the optimized conditions, the maximum adsorption of AGs on the AAC could reach 8.0 μg. Moreover, the proposed AAC could be reused more than 20 times. The resultant AAC that conjugated with the aptamer was successfully applied in the enrichment and purification of four AGs in a milk sample and good recovery results in the range of 83.3–98.8% were obtained (with RSD in the range of 0.6–5.8%). The proposed AAC for recognition of multi-target AGs exhibited good enrichment and purification effects, showing great application potential for targets with their related aptamers.

Design of green coating material of combining rigid and flexible properties for the extraction of aminoglycosides residues

Bio-based and low-cost hybrid polyvinyl alcohol (PVA) and gelatin (Gel) hydrophilic macromolecular complex coated microspheres were prepared based on one-pot process, characterized, and applied as novel sorbent materials for the purification of trace aminoglycosides from complex matrices. PVA acts as a "rigid" component in the hybrid complex to enhance its mechanical properties, while Gel's "flexible" role is to improve the swelling properties of the hybrid complex in water. It is shown that hybrid PVA/Gel-functionalized sorbents are more efficient than the respective PVA or Gel sorbents since the presence of Gel increases the material selectivity for aminoglycosides, which is due to the specific interactions occurring between the targets and amino acid residues in the hybrid materials. Under the optimum conditions, material preparation and pretreatment processes were entirely carried out in single water system without toxic organic solvent. The detection limit (LOD) of spectinomycin, kanamycin, streptomycin and dihydrostreptomycin in honey were 0.811, 0.303, 0.168, 0.045 μg⋅kg^-1 respectively. Linearity was obtained in the range of 20 to 2000 ug⋅kg^-1, relative recovery yield up to 84.1-111.7% were obtained and matrix effect of all four aminoglycosides was within 100.8-107.6%. Intra-day and inter-day precision under four spiking levels (5, 200, 500 and 1000 ug⋅kg^-1) were less than 10.9% (n=6) and 13.6% (n=3) respectively. In addition, the sorbents exhibited excellent reusability even after six recycles. This work demonstrates the potential of bio-based and low-cost hybrid polymer extraction platforms as promising bonded phase alternatives, in which eco-friendly and natural-based polymers can be used to improve the material selectivity and are conducive to the realization of "green chemistry".

Recent Materials Developed for Dispersive Solid Phase Extraction

Solid phase extraction (SPE) is an analytical procedure developed with the purpose of separating a target analyte from a complex sample matrix prior to quantitative or qualitative determination. The purpose of such treatment is twofold: elimination of matrix constituents that could interfere with the detection process or even damage analytical equipment as well as enriching the analyte in the sample so that it is readily available for detection. Dispersive solid phase extraction (dSPE) is a recent development of the standard SPE technique that is attracting growing attention due to its remarkable simplicity, short extraction time and low requirement for solvent expenditure, accompanied by high effectiveness and wide applicability. This review aims to thoroughly survey recently conducted analytical studies focusing on methods utilizing novel, interesting nanomaterials as dSPE sorbents, as well as known materials that have been only recently successfully applied in dSPE techniques, and evaluate their performance and suitability based on comparison with previously reported analytical procedures.

Ionic magnetic core–shell nanoparticles for DNA extraction

The fabrication ionic magnetic core-shell nanoparticles were simple synthesize with a super-ferromagnetic and small particle size properties, which enabled sufficient DNA particle loading with easy isolation based on an external magnetic field.

Development of carbohydrate functionalized magnetic nanoparticles for aminoglycosides magnetic solid phase extraction

Magnetic nanoparticles decorated with d-galactose and galactitol (Fe₃O₄@SiN-galactose and Fe₃O₄@SiN-galactitol) were synthesized and employed as sorbent in a magnetic solid phase extraction (MSPE) procedure prior the analysis of aminoglycosides (AGs) in honey samples by LC-MS/MS. AGs are broad spectrum antibiotics, characterized by aminosugars, widespread used in therapeutic and veterinary applications. AGs can be found in the environment and food of animal origin. Fe₃O₄@SiN-galactose and Fe₃O₄@SiN-galactitol were synthesized via copper catalyzed alkyne azide cycloaddition and the synthesis was efficiently followed by infrared spectroscopy. They were characterized by electron microscopy, thermogravimetric analysis and magnetization curves. The nature of the loading (acetonitrile:water, 50:50 v/v) and elution solution (formic acid 190 mM) were studied in order to optimize the MSPE. Quantitative difference between MSPE with Fe₃O₄@SiN-galactose and MSPE with Fe₃O₄@SiN-galactitol in terms of recovery was found. The final optimized method using Fe₃O₄@SiN-galactose and Fe₃O₄@SiN-galactitol was applied in the determination of AGs in honey. The MSPE performance of Fe₃O₄@SiN-galactitol was found to be superior to that of MSPE with Fe₃O₄@SiN-galactose. The limits of quantification were between 2 and 19 μg kg^-1 for amikacin, dihydrostreptomycin, tobramicyn and gentamycin. A good correlation between predicted and nominal values of AGs in honey was found (trueness from 84% to 109%). This MSPE procedure not only requires a minimum amount of sorbent (1 mg) and sample (0.2 g), but it can also be accomplish in a rather short time.