Ionic liquid-functionalized silica aerogel as coating for solid-phase microextraction

Post-synthetic modification of covalent organic framework for efficient adsorption of organochlorine pesticides from cattle's milk

Analysis of organochlorine pesticides (OCPs) residues in milk faces a significant challenge. Herein, a sea urchin structured covalent organic framework bearing boric acid groups named COF-B(OH)2 was synthesized and applied as a coating material for solid-phase microextraction (SPME) of the OCPs in cattle's milk. Its performance was superior to that of three commonly used commercial SPME fibers, which could be due to the coexistence of hydrogen bonding, halogen bonding, π-stacking and electrostatic interactions. Besides, the fiber coating displayed good stability and reusability. After optimization, a COF-B(OH)2 based SPME coupled with gas chromatography-electron capture detection was established for the sensitive detection of the OCPs from milk samples. The limits of detection (S/N = 3) were between 0.04 and 1.00 μg kg-1. Satisfactory accuracy was achieved with the method recoveries in the range of 87.5 % to 112.5 %. These results manifest the feasibility of the COF-B(OH)2 coated fiber for the enrichment of the trace OCPs from milk samples.

Controlled synthesis of sulfhydryl-dendritic mesoporous silica nanospheres for ultrafast extraction and sensitive analysis of organochlorine herbicides containing amide groups

The distinctive morphology of dendritic mesoporous silica nanoparticles (DMSN) has recently attracted considerable attention in scientific community. However, synthesis of DMSN with well-defined structure and uniform size for ultrafast extraction of trace herbicide residues from environmental and food samples remains to be a compelling challenge. In this study, sulfhydryl functionalized dendritic mesoporous silica (SH-DMSN) was synthesized and the SH-DMSN showcases monodisperse microspheres with flower shape and precisely tailored and controllable pore sizes. This distinctive structural configuration accelerates mass transfer within the silica layer, resulting in heightened adsorption efficiencies. Furthermore, the particle sizes (455, 765, and 808) of the adsorbent can be meticulously fine-tuned by introducing distinct templates. Specifically, when the particle size is 765 nm, the optimized SH-DMSN exhibits a substantial specific surface area (691.32 m²/g), outstanding adsorption efficiencies (>90 %), remarkably swift adsorption and desorption kinetics (2 min and 3 min, respectively), and exceptional stability. The superior adsorption capabilities of this novel adsorbent, ranging from 481.65 to 1021.7 µg/g for organochlorine herbicides containing amide groups, can be attributed to the interplay of S-π interactions, halogen bonding, and electrostatic attraction interaction. These interactions involve the lone pair electrons of sulfhydryl and silanol groups with the π-electrons, halogen atoms and amide groups in herbicide molecules. This study not only offers a new perspective on advancing the practical utilization of dendritic mesoporous silica but also provides a pragmatic strategy for the separation and analysis of herbicides in diverse sample matrices.

Silver nanoparticle-functionalized melamine-formaldehyde aerogel for online in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons followed by HPLC-DAD analysis

Based on the π-metal interaction between silver nanoparticles (AgNPs) and aromatic compounds, AgNPs were in-situ grown to melamine-formaldehyde (MF) aerogel for improving the extraction performance to polycyclic aromatic hydrocarbons (PAHs). The AgNPs/MF aerogel was regulated through varing the concentration of reactants, and characterized by scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray powder diffraction. As a new extraction coating, the AgNPs/MF aerogel was coated to stainless-steel wires for in-tube solid-phase microextraction (IT-SPME). The extraction effects of MF aerogels before and after the modification of AgNPs were compared, and the AgNPs greatly improved the extraction ability for PAHs reaching to 166.4 %. Combining IT-SPME with high performance liquid chromatographic detection, an online analytical system was constructed. Furthermore, the sampling volume and rate, concentration of organic solvent, and desorption time were optimized factor by factor. The online analytical method with low detection limits (0.003-0.010 μg L-1) and efficient enrichment factors (1998-3237) for PAHs was established, which fastly detected trace level of PAHs in drinking and environmental water samples. Compared with other methods, the method was comparable or better in the detection limit and linear range, indicating prospective application of the AgNPs/MF aerogel for sample preparation.

Ionic Liquid-Assisted DLLME and SPME for the Determination of Contaminants in Food Samples

Developing effective and green methods for food analysis and separation has become an urgent issue regarding the ever-increasing concern of food quality and safety. Ionic liquids (ILs) are a new chemical medium and soft functional material developed under the framework of green chemistry and possess many unique properties, such as low melting points, low-to-negligible vapor pressures, excellent solubility, structural designability and high thermal stability. Combining ILs with extraction techniques not only takes advantage of ILs but also overcomes the disadvantages of traditional extraction methods. This subject has attracted intensive research efforts recently. Here, we present a brief review of the current research status and latest developments regarding the application of IL-assisted microextraction, including dispersive liquid–liquid microextraction (DLLME) and solid-phase microextraction (SPME), in food analysis and separation. The practical applications of ILs in determining toxic and harmful substances in food specimens with quite different natures are summarized and discussed. The critical function of ILs and the advantages of IL-based microextraction techniques over conventional extraction techniques are discussed in detail. Additionally, the recovery of ILs using different approaches is also presented to comply with green analytical chemistry requirements.

Recent advances of ordered mesoporous silica materials for solid-phase extraction

This review mainly focuses on the development and application of ordered mesoporous silica materials for solid-phase extraction in recent years. It overviews not only bare mesoporous silica but also the functionalized mesoporous silica with organic groups, molecularly imprinted polymers, and magnetic materials. These mesoporous silica materials were used as the extraction adsorbents in cartridge solid-phase extraction, dispersive solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction and matrix solid phase dispersion. Coupled with atomic emission spectrometry, chromatography or other detection methods, these techniques efficiently extracted and sensitively determined various targets, such as metal ions, perfluorocarboxylic acids, pesticides, drugs, endocrine disruptors, phenols, flavanones, polycyclic aromatic hydrocarbons, parabens and so on. Based on unique advantages of mesoporous silica materials, the developed analytical method successfully analyzed different matrix samples, like environmental water samples, soil samples, food samples, biological samples and cosmetics. In addition, the prospects of these materials in solid-phase extraction are presented, which can offer an outlook for the further development and applications.

Preparation of aerogel and its application progress in coatings: a mini overview

Aerogels are predominantly mesoporous, extremely lightweight, low density (∼ 0.003 g/cm3) and thermally insulating materials. Over the years, aerogels have gained increasing attention due to their extraordinary properties (light, heat, sound, electricity and force) and application potentials in varieties of fields. Several studies have been carried out regarding aerogel preparation and its applications in coatings on different substrates. In this review, an overview of aerogels preparation and their application progress in coatings of most common substrates is presented. Attention is paid to aerogel coatings of textiles, leather, and substrates other than leather and textiles for special functionalities that could address the application progress in coatings. This review will help to inspire scientists and engineers towards novel aerogel materials and technologies to boost the industrial fabrication of flexible advanced materials.

Temperature and time-controlled hydrothermal growth and sorption selectivity of titania nanowires on titanium fiber for highly efficient solid-phase microextraction

Two kinds of TiO₂ nanowires (TiO₂NWs) with different orientation were in-situ grown on Ti substrates by controlling temperature and time during the hydrothermal process. The adsorption performance was evaluated by using typical aromatic compounds as model analytes coupled to HPLC with UV detection. The results demonstrated that the TiO₂NWs coating grown at higher temperature within longer time had better affinity towards PAHs. For this purpose, the key experimental factors affecting the adsorption performance of the TiO₂NWs coating fabricated at 200 °C for 10 h were further investigated and optimized for the extraction of PAHs. Under the optimized conditions, the proposed method presented linear responses in the concentration ranges of 0.05 to 200 μg·L^-1 PAHs with correlation coefficients more than 0.998. LODs (S/N=3) were 0.008 to 0.034 μg·L^-1. Moreover, RSDs for the single fiber repeatability of the intra-day and the inter-day analyses were less than 5.6% (n=5) and 5.8%, respectively. RSDs for the fiber-to-fiber reproducibility were between 5.1% and 6.5%. Finally, the proposed method was successfully applied to the selective preconcentration and determination of trace PAHs in environmental water samples. In addition, The fabricated Ti fiber can be used at least 200 times due to its high mechanical and chemical stability.

ZrO2 Nanoparticles and Poly(diallyldimethylammonium chloride)-Doped Graphene Oxide Aerogel-Coated Stainless-Steel Mesh for the Effective Adsorption of Organophosphorus Pesticides

A novel sorbent based on the ZrO₂ nanoparticles and poly(diallyldimethylammonium chloride)-modified graphene oxide aerogel-grafted stainless steel mesh (ZrO₂/PDDA-GOA-SSM) was used for the extraction and detection of organophosphorus pesticides (OPPs). Firstly, the PDDA and GO composite was grafted onto the surface of SSM and then freeze-dried to obtain the aerogel, which efficiently reduced the accumulation of graphene nanosheets. It integrated the advanced properties of GOA with a thin coating and the three-dimensional structural geometry of SSM. The modification of ZrO₂ nanoparticles brought a selective adsorption for OPPs due to the combination of the phosphate group as a Lewis base and ZrO₂ nanoparticles with the Lewis acid site. The ZrO₂/PDDA-GOA-SSM was packed into the solid-phase extraction (SPE) cartridge to extract OPPs. According to the investigation of different factors, the extraction recovery was mainly affected by the hydrophilic-hydrophobic properties of analytes. Effective extraction and elution parameters such as sample volume, sample pH, rate of sample loading, eluent, and eluent volume, were also investigated and discussed. Under the optimal conditions, the linearity of phoxim and fenitrothion was in the range of 1.0-200 μg L^-1, and the linearity of temephos was in the range of 2.5-200 μg L^-1. The limits of detection were ranged from 0.2 to 1.0 μg L^-1. This established method was successfully applied to detect OPPs in two vegetables. There was no OPP detected in real samples, and results showed that the matrix effects were in the range of 46.5%-90.1%. This indicates that the ZrO₂/PDDA-GOA-SSM-SPE-HPLC method could effectively extract and detect OPPs in vegetables.

In-syringe temperature-controlled liquid-liquid microextraction based on solidified floating ionic liquid for the simultaneous determination of triazine and phenylurea pesticide in vegetable protein drinks

A novel in-syringe temperature-controlled liquid-liquid microextraction based on solidified floating ionic liquid (in-syringe TC-LLME-SFIL) combined with high performance liquid chromatography was developed for the simultaneous determination of monuron, chlorotoluron, atrazine, monolinuron, propazine and prometryn in commercial vegetable protein drinks. The samples were deproteinized by trichloroacetic acid and further cleaned up by solid phase extraction column. The ionic liquid tributyldodecylphosphonium tetrafluoroborate ([P_{4 4 4 12}]BF₄) was used as extraction solvent and dispersed into the depurated sample solution to form fine droplets with the assistance of heating and vortex. With the help of an ice bath, the ionic liquid phase solidified and floated on the surface of aqueous phase. After separation from the aqueous phase, the solidified ionic liquids were dissolved with acetonitrile and the resulting solution was analyzed by high performance liquid chromatography. Some extraction parameters, including type and amount of adsorbent, type and amount of ionic liquids, amount of NaCl, melting temperature and time of ionic liquid, vortex time, pH of sample solution, ice bath temperature and time, were investigated and optimized by single-factor experiment, Plackett-Burman design and Box-Behnken design. The results showed that good linearities (r ≥ 0.9994) were obtained in the concentration range of 7.8-1000.0 μg/L. The limits of detection and quantification were in the range of 0.25-2.59 μg/L and 0.82-8.63 μg/L, respectively. The spiked recoveries were 81.26-118.42% with the relative standard deviation (RSD, n = 3) lower than 8.17%. The present method was successfully applied to the simultaneous determination of triazine and phenylurea herbicides in vegetable protein drinks.

Recent advances in micro- and nanomaterial-based adsorbents for pipette-tip solid-phase extraction

There are a lot of review papers of sample pretreatment, but the comprehensive review on pipette-tip solid-phase extraction (PT-SPE) is lacking. This review (133 references) is mainly devoted to the development of different types of micro- and nanosorbent-based PT-SPE, including silica materials, carbon materials, organic polymers, molecularly imprinted polymers, and metal-organic frameworks. Each section mainly introduces and discusses the preparation methods, advantages and limitations of adsorbents, and their applications to environmental, biological, and food samples. This review also demonstrates the advantages of PT-SPE like convenience, speed, less organic solvent, and low cost. Finally, the future application and development trend of PT-SPE are prospected.

Recent Advances of Triazine-Based Materials for Adsorbent Based Extraction Techniques

This review mainly focused on the synthesis and properties of triazine-based materials as well as the state-of-the-art development of these materials in adsorption-based extraction techniques in the past 5 years, such as solid-phase extraction, magnetic solid-phase extraction, solid-phase microextraction and stir bar sorptive extraction, and the detection of various pollutants, including metal ions, drugs, estrogens, nitroaromatics, pesticides, phenols, polycyclic aromatic hydrocarbons and parabens. In the triazine-functionalized composites, triazine-based polymers and covalent triazine frameworks have been developed as the adsorbents with potential for environmental pollutants, mainly relying on the large surface area and the affinity of triazinyl groups with the targets. Triazine-based adsorbents have satisfactory sensitivity and selectivity towards different types of analytes, attributed from various mechanisms including π-π, electrostatics, hydrogen bonds, and hydrophobic and hydrophilic effects. The prospects of the materials for adsorption-based extraction were also presented, which can offer an outlook for the further development and applications.

Magnetic polyamidoamine dendrimer grafted with 4-mercaptobenzoic acid as an adsorbent for preconcentration and sensitive determination of polycyclic aromatic hydrocarbons from environmental water samples

Polyamidoamine dendrimer decorated Fe₃O₄ magnetic nanoparticles was synthesized and grafted with 4-mercaptobenzoic acid (4-MBA). The resulting material was utilized to develop an effective magnetic solid phase extraction method in combination with high performance liquid chromatography for trace determination of polycyclic aromatic hydrocarbons including phenanthrene (PHE), anthracene (ANT), fluoranthene (FLT), pyrene (PYR) and benzo(a)pyrene (BaP). The MNPs@G3.0@4-MBA exhibited to be an efficient extracting medium due to the existence of terminal benzene ring groups, the internal pores, and strong hydrophobic interactions and π-π interactions. The experiments demonstrated that the proposed method possessed excellent linearity in the concentration range of 0.1-300 μg L^-1 with correlation coefficients (R) larger than 0.997, and the limits of detection (LODs, S/N = 3) according to the ratio of signal to noise equal to three of PHE, ANT, FLT, PYR and BaP were 0.014 μg L^-1, 0.032 μg L^-1, 0.055 μg L^-1, 0.027 μg L^-1 and 0.039 μg L^-1, respectively. The proposed method was applied to real water samples and the spiked recoveries were over the range of 92-99%. The results showed that the method earned good repeatability and high sensitivity, and the as-prepared materials were stable and reusable, which displayed that the proposed method would have a wonderful application prospect.

Poly(ionic liquid)-hybridized silica aerogel for solid-phase microextraction of polycyclic aromatic hydrocarbons prior to gas chromatography-flame ionization detection

Using poly(ionic liquid) (PIL) and tetraethyl orthosilicate (TEOS) as the co-precursors, PIL-hybridized silica aerogel was prepared via sol-gel method for solid-phase microextraction (SPME). The ratio between PIL and TEOS was regulated to achieve the best extraction effect. The aerogel was coated onto the surface of stainless steel wire to get SPME fiber. Coupled to gas chromatography-flame ionization detector (GC-FID), the fiber was separately evaluated by the determination of alkanes, polycyclic aromatic hydrocarbons (PAHs), as well as BTEX (benzene, toluene, ethylbenzene, and xylenes) in immersion mode. The extraction performance of PAHs was attributed to π stacking and hydrophobic effect. After optimization of main extraction and desorption conditions, the SPME-GC-FID method was established towards eight PAHs, and it provided low detection limits (0.005 μg L^-1, 0.010 μg L^-1) and wide linear ranges (0.016-20.00 μg L^-1, 0.033-20.00 μg L^-1) with good linear coefficients (0.9991-0.9998). The method was applied to detect trace PAHs in real water samples, with relative recoveries of 86.2-119.2%. Furthermore, PIL-hybridized silica aerogel exhibits some superiorities like higher sensitivity, shorter extraction time, and better repeatability over other extraction coatings. The present work not only extends the range of aerogel materials but also promoted their further applications in sample preparation. Graphical abstract.

Polyaniline/titanium dioxide nanorods functionalized carbon fibers for in-tube solid-phase microextraction of phthalate esters prior to high performance liquid chromatography-diode array detection

To improve extraction performance of carbon fibers (CFs) towards phthalate esters (PAEs), titanium dioxide (TiO₂) nanorods array was in-situ grown on the surface of CFs, then polyaniline (PANI) was used to modify it. PANI/TiO₂ nanorods-CFs were placed into a polyetheretherketone tube for solid-phase microextraction (SPME). Combining the tube to high performance liquid chromatography (HPLC), it was evaluated and displayed good extraction performance for several PAEs. Compared with bare CFs, TiO₂ nanorods and PANI, PANI/TiO₂ nanorods presented best performance, attributed to the unique advantages between high surface area of TiO₂ nanorods and multiple adsorption interactions (like π-π stacking, hydrogen bond) of PANI. After the optimization of the important factors (sampling volume, sampling rate, sample pH, concentrations of organic solvent and salt in sample, and desorption time), the online in-tube SPME-HPLC method was established. It provided low limits of detection (0.01-0.05 μg L^-1) and wide linear ranges (0.03-30, 0.10-30, 0.17-30 μg L^-1) with correlation coefficients larger than 0.9991. The relative standard deviations (n=6) between intra-day and inter-day tests were in the ranges of 3.5-10.3% and 4.7-13.9%, respectively. The method was successfully used to determine seven PAEs in real water samples. Besides of satisfactory durability, the material also exhibited superior extraction performance than some materials.

Solid-phase microextraction of methadone by using a chitosan nanocomposite incorporated with Polyoxomolibdate nanocluster/Graphene oxide

In the present study, we report on the simple sol-gel preparation of a nanocomposite composed of chitosan/ polyoxometalate /graphene oxide, and its application in the headspace solid-phase microextraction combined with the ion mobility spectrometry for the analysis of methadone in biological matrices. The developed nanocomposite was characterized through the infrared spectroscopy and thermogravimetric analyses. The ternary nanocomposite coating offers good mechanical and thermal stability and high extraction efficiency thanks to its large specific surface. A central composite statistical design was used to study the main variables affecting the extraction efficiency. Afterward, to study the relationship between different input and output variables as well as to identify the optimal operating conditions, response surface methodology was used, whereby a second-order polynomial equation was fit to the experimental data. The optimized extraction conditions were as follows: temperature, 70°C; extraction time, 15 min; and concentration of NaCl, 5%w/v. The detection limit of 0.12 ng/mL was obtained at the optimized extraction conditions, and the calibration plot was linear in the concentration range of 0.30-200 ng/mL. With relatively low limit of detection and good precisions, the proposed method has the potential for the extraction and determination of methadone in biological samples.

Solid phase extraction based on trimethylsilyloxy silica aerogel

Solid-phase extraction (SPE) based on trimethylsilyloxy-modified silica aerogel was developed for extraction of chemotherapeutic drugs from water. The developed method is easy and affordable, can be performed in separating funnel and does not require a vacuum and SPE manifold. The extraction and recovery of cyclophosphamide (CYP), dexamethasone (DEX), and paclitaxel (TAX) by the aerogel from water were investigated. The factors governing the extraction efficiency such as sample pH, sample volume, volume of eluent and concentration of analytes were studied. The LOD and LOQ of the developed method were calculated and linearity was found in the range of 4–100 μg L⁻¹. The extraction efficiency of the aerogel was compared to that of other SPE cartridges, Oasis HLB, Strata-X-C, C18 and polymeric reversed phase, and the aerogel showed similar or better performance than the other commercial cartridges available on the market. The developed method was also used to extract chemotherapeutic drugs spiked in hospital wastewater.

Solid-phase extraction (SPE) based on trimethylsilyloxy-modified silica aerogel was developed for extraction of chemotherapeutic drugs from water.

Application of Covalent Organic Porous Polymers-Functionalized Basalt Fibers for in-Tube Solid-Phase Microextraction

To establish an online analytical method towards estrogenic pollutants, a covalent organic porous polymer (COP) was in-situ synthesized on the surface of basalt fibers (BFs) for in-tube solid-phase microextraction (IT-SPME). The extraction tube, obtained via placing the modified BFs into a polyetheretherketone tube, was combined with high-performance liquid chromatography (HPLC) to achieve online IT-SPME-HPLC analysis. The important parameters, including sampling volume, sampling rate, organic solvent content and desorption time, were carefully investigated. Under the optimized conditions, the online analytical method was established for five estrogenic targets, with low limits of detection (0.001–0.005 μg/L), high enrichment factors (1800–2493), wide linear ranges (0.003–20, 0.015–20 μg/L) and satisfactory repeatability. It was successfully applied to detect five estrogens in a wastewater sample and a water sample in a polycarbonate cup. The BFs functionalized with COPs displayed excellent extraction effect for estrogenic pollutants, furthermore it has great potential in sample preparation or other fields.

Application of biocharcoal aerogel sorbent for solid-phase microextraction of polycyclic aromatic hydrocarbons in water samples

A facile method was introduced for preparing a biocharcoal aerogel, which was derived from pomelo peel as the only raw material. The inner spongy layer of pomelo peel was freeze-dried for maintaining three-dimensional structure and then carbonized under high temperature and oxygen-limited conditions. The morphological structure and graphitization degree of biocharcoal aerogel were characterized using a scanning electron microscope and Raman spectrum. After sifting and grinding, the biocharcoal aerogel as an adsorbent was coated onto the surface of stainless steel wires. Through placing the wires into a polyetheretherketone tube, the in-tube solid-phase microextraction device was obtained. Coupled with high-performance liquid chromatography, it exhibited good extraction performance for polycyclic aromatic hydrocarbons, then an online analytical method was established with low limits of detection (0.005-0.050 ng/mL), wide linear ranges (0.017-15 ng/mL) with superior correlation coefficients higher than 0.9990, high enrichment factors (1128-3425), and acceptable intra- and inter-day repeatabilities (relative standard deviations ≤ 6.7%, n = 3). The method was applied to detect polycyclic aromatic hydrocarbons in bottled water samples, environmental water samples, and soft drinks with satisfactory recoveries (83.3-120.9%). This research not only developed a new carbon aerogel but also evaluated its adsorption performance in sample preparation.