Quantification of the composition of liquid hydrocarbon streams: Comparing the GC-VUV to DHA and GCxGC

Limits of identification using VUV spectroscopy applied to C8H18 isomers isolated by GC×GC

The vacuum ultraviolet detector for gas chromatography can be used to identify structural differences between isomers with similar chromatographic elution times, which adds detail to characterization, valuable for prescreening of sustainable aviation fuel candidates. Although this capability has been introduced elsewhere, vacuum ultraviolet spectroscopy for saturated hydrocarbons has been examined minimally, as the similarities between their spectra are much less significant than their aromatic counterparts. The fidelity with which structural differences can be identified has been unclear. In this work, all possible structural isomers of C₈H₁₈ are measured and determined to have unambiguously unique vacuum ultraviolet spectra. Using a statistically based residual comparison approach, the concentration limits at which the spectral differences are interpretable are tested in both a controlled study and a real fuel application. The concentration limit at which the spectral differences between C₈H₁₈ isomers are unambiguous is below 0.40% by mass and less than 0.20% with human discretion in our experimental configuration.

High information spectroscopic detection techniques for gas chromatography

Gas chromatography has always been a simple and widely used technique for the separation of volatile compounds and their quantitation. However, the common detectors used with this technique are mostly universal and do not provide any specific qualitative information. There have been some attempts to combine the separation power of GC with the qualitative capabilities of "high-information" spectroscopic techniques including infrared spectroscopy, nuclear magnetic resonance spectroscopy, molecular rotational resonance spectroscopy, and vacuum ultraviolet spectroscopy. Some of these hyphenations have proven to be quite successful while others were less so. The history of such attempts, up to the most recent studies in this area, are discussed. Most recently, the hyphenation of GC with molecular rotational resonance spectroscopy which provides promising results and is a newly developed technique is reviewed and compared to previous high-information spectroscopic detection approaches. The history, description and features of each method along with their applications and challenges are discussed.

A systematic study of the absorbance of the nitro functional group in the vacuum UV region

The nitro functional group (NO₂) features strongly in compounds such as explosives, pharmaceuticals, and fragrances. However, its gas phase absorbance characteristics in the vacuum UV region (120-200 nm) have not been systematically studied. Gas chromatography/vacuum UV spectroscopy (GC/VUV) was utilized to study the gas phase VUV spectra of various nitrated compounds (e.g., nitrate esters (-R-O-NO₂), nitramines (R-N-NO₂), nitroaromatics (Ar-NO₂), and nitroalkanes (R-NO₂)). The nitro absorption maximum appeared over a wide range (170-270 nm) and its wavelength and intensity were highly dependent upon the structure of the rest of the molecule. For example, the nitroalkanes exhibited a trend in that the ratio of the relative absorption intensity between these two absorption features between the alkyl group (<150 nm) and the nitro group (200 nm) increases as the molecular weight increases. It was observed that the addition of multiple nitro functional groups on benzene or toluene resulted in an increase in intensity and blue shift from approximately 240 nm-210 nm. Nitrate esters exhibited an absorption between 170 nm and 210 nm and absorbance increased with increasing nitrogen content. The relative diversity of the spectra obtained was analyzed by Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA). These calculations revealed that the spectra of all the compounds analyzed could be reliably differentiated without any misclassifications.

Determination of vacuum ultraviolet detector response factors by hyphenation with two-dimensional comprehensive gas chromatography with flame ionization detection

Two-dimensional comprehensive gas chromatography is an established technique, employed for the characterization of complex samples. Broadband vacuum ultraviolet absorption spectroscopy detection has recently attracted a lot of attention as it is a universal detection technique characterized by good selectivity but also ease of use and amenability to coupling with two-dimensional comprehensive gas chromatography. Vacuum ultraviolet spectroscopy is particularly interesting due to the possibility of performing spectral decomposition for species that coelute in gas chromatography analysis. This detector has quantitative capabilities, however not all species absorb vacuum ultraviolet radiation the same. Unfortunately, vacuum ultraviolet relative response factors for compounds are not always available. Methods to rapidly measure vacuum ultraviolet relative response factors and generate a large database that would allow calibration free quantitative analysis of complex mixtures are therefore of great interest. In this work, a universal methodology that permits rapid measurement of vacuum ultraviolet relative response factors is reported. It involves flow modulated two-dimensional comprehensive gas chromatography with dual vacuum ultraviolet and flame ionization detection. In this set-up, flame ionization detection is employed as a quantitative reference allowing to scale vacuum ultraviolet responses of investigated compounds. This approach was validated by flow measurements and by comparing relative response factors obtained for model compounds with literature data.

A critical comparison of vacuum UV (VUV) spectrometer and electron ionization single quadrupole mass spectrometer detectors for the analysis of alkylbenzenes in gasoline by gas chromatography: Experimental and statistical aspects

Recent advances in benchtop vacuum ultraviolet (VUV) spectrometers have yielded effective universal detectors for gas chromatography (GC). The ability of these detectors to acquire absorbance spectra from 125 nm to 430 nm poses an alternative to the gold standard of mass spectrometry (MS) as a sensitive and selective GC detector. The applications of GC/VUV extend into many areas. Featured here is the potential application of GC/VUV to the analysis of ignitable liquids, which may be found on debris from suspected arson fires. A particular compound class of interest is the alkylbenzenes, as they are a significant component in fuels such as gasoline, petroleum distillates, and aromatic solvents such as degreasers and cleaning solvents. To measure the sensitivity, selectivity and specificity of GC-VUV and GC-MS for alkylbenzenes we employed both library search methods and chemometric analysis using discriminant analysis. The GC-VUV detector was found to have superior specificity to the GC-MS detector in full scan mode. The GC-VUV detector was able to identify all alkylbenzenes correctly, including the correct identification of all structural isomers. LODs for both GC-VUV and GC-MS were found to be picograms on column.

Thermal and spectroscopic analysis of nitrated compounds and their break-down products using gas chromatography/vacuum UV spectroscopy (GC/VUV)

Gas chromatography/vacuum UV spectroscopy (GC/VUV) was utilized to study various explosives and pharmaceuticals in the nitrate ester and nitramine structural classes. In addition to generating specific VUV spectra for each compound, VUV was used to indicate the onset of thermal decomposition based upon the appearance of break-down products such as nitric oxide, carbon monoxide, formaldehyde, water, and molecular oxygen. The effect of temperature on decomposition could be fit to a logistical function where the fraction of intact compound remaining decreased as the transfer line/flow cell temperature was increased from 200 °C to 300 °C. Utilizing this relationship, the decomposition temperatures for the nitrate ester and nitramine compounds were determined to range between 244 °C and 277 °C. It was also discovered that the decomposition temperature was dependent on the GC carrier gas flow rate and, therefore, the residence time of the compounds in the transfer line/flow cell. For example, the measured decomposition temperature of nitroglycerine ranged from 222 °C to 253 °C across four flow rates. Tracking the appearance/disappearance of decomposition products across this temperature range indicated that NO, CO, and H₂CO are final decomposition products while O₂ and H₂O are intermediate products. The decomposition temperatures for all explosives were highly correlated to similar decomposition measurements taken by differential scanning calorimetry (DSC) (r = 0.91) and thermal gravimetric analysis (TGA) (r = 0.90-0.98). In addition, the decomposition temperatures for all explosives were negatively correlated to the heat of explosion at constant volume (r = -0.68) and strongly positively correlated to the oxygen balance (r = 0.92).

Optimization of the qualitative and quantitative analysis of cocaine and other drugs of abuse via gas chromatography - Vacuum ultraviolet spectrophotometry (GC - VUV)

Gas Chromatography-Vacuum UV Spectroscopy (GC-VUV) has seen increased attention in many areas, however, a statistical optimization of VUV method parameters has not been published. This article presents the first statistical optimization of parameters influencing analytes such as cocaine in the VUV flow-cell. Flow-cell temperature, make-up gas pressure, and carrier gas flow rate from the GC were examined and optimized for the detection of controlled substances. The accuracy, precision, linearity, and optimized detection limits for drugs such as cocaine (98.5%, 1.2%, 0.9998, 1.5 ng), heroin (99.3%, 0.94%, 0.9998, 2.0 ng), and fentanyl (98.5%, 1.7%, 0.9752, 9.7 ng) are reported. In general, the limits of detection for cocaine, heroin, fentanyl, and methamphetamine after optimization were comparable to gas chromatography-mass spectrometry (GC-MS) in "scan mode", which had detection limits of 1.1-38 ng on column. The VUV absorption spectra of cocaine, PCP, lorazepam, and HU-210 are also reported. And three samples of "real world" cocaine are analyzed to demonstrate applicability to forensic drug analysis.

Method development and evaluation of pyrolysis oils from mixed waste plastic by GC-VUV

The conversion of waste streams into a useable material through a recycling process is a hot topic. Waste streams can originate from domestic and industrial sources and range from plastic waste to medical waste to various industrial waste streams, both solid and liquid. In addition to waste circularity, circularity for bio-based waste streams and renewable sources are also being investigated. To simplify this complexity, this article presents a case study evaluating the output from the feedstock recycling of plastic waste originating from municipal solid waste. Plastic waste entering the environment is undesired, and many initiatives are working towards a plastics circular economy. Once disposed of, ideally, plastic waste should be either re-used or recycled in order to avoid incineration or disposal in landfills. Recycling waste plastic can occur either via mechanical recycling or feedstock (chemical) recycling, where feedstock recycling can occur for example, through gasification or pyrolysis technologies. This article will focus only on the oils obtained from the pyrolysis of mixed waste plastic. The output from pyrolysis has a different composition than traditional fossil-based hydrocarbon streams, and therefore, must be evaluated to correctly process as feedstock. The authors have previously shown that gas chromatography coupled to vacuum ultraviolet detection (GC-VUV) provides accurate identification and quantification of the hydrocarbon composition (paraffins, isoparaffins, olefins, naphthenes, and aromatics - PIONA) of fossil-based liquid hydrocarbon streams.¹ Therefore, GC-VUV was evaluated for analysis of the pyrolysis oils from plastic waste. Using an in-house modified spectral library in combination with the PIONA+ software, accurate identification and quantification of the hydrocarbon composition of pyrolysis oils from C₄ through C₃₀₊ was possible with a limit of detection of 0.1 wt.%. To the best of our knowledge, this article is the first example of accurate PIONA-type quantification of pyrolysis oils by GC-VUV.

Identifying Thermal Decomposition Products of Nitrate Ester Explosives Using Gas Chromatography-Vacuum Ultraviolet Spectroscopy: An Experimental and Computational Study

Analysis of nitrate ester explosives (e.g., nitroglycerine) using gas chromatography-vacuum ultraviolet spectroscopy (GC-VUV) results in their thermal decomposition into nitric oxide, water, carbon monoxide, oxygen, and formaldehyde. These decomposition products exhibit highly structured spectra in the VUV that is not seen in larger molecules. Computational analysis using time-dependent density functional theory (TDDFT) was utilized to investigate the excited states and vibronic transitions of these decomposition products. The experimental and computational results are compared with those in previous literature using synchrotron spectroscopy, electron energy loss spectroscopy (EELS), photoabsorption spectroscopy, and other computational excited state methods. It was determined that a benchtop GC-VUV detector gives comparable results to those previously reported, and TDDFT could predict vibronic spacing and model molecular orbital diagrams.

Simulation of Vacuum Ultraviolet Absorption Spectra: Paraffin, Isoparaffin, Olefin, Naphthene, and Aromatic Hydrocarbon Class Compounds

The advent of a new vacuum ultraviolet (VUV) spectroscopic absorption detector for gas chromatography has enabled applications in many areas. Theoretical simulations of VUV spectra using computational chemistry can aid the new technique in situations where experimental spectra are unavailable. In this study, VUV spectral simulations of paraffin, isoparaffin, olefin, naphthene, and aromatic (PIONA) compounds using time-dependent density functional theory (TDDFT) methods were investigated. Important factors for the simulations, such as functionals/basis sets and formalism of oscillator strength calculations, were examined and parameters for future PIONA compound simulations were obtained by fitting computational results to experimental spectra. The simulations produced satisfactory correlations between experimental observations and theoretical calculations, and enabled potential analysis applications for complex higher distillate fuels, such as diesel fuel. Further improvement of the methods was proposed.

Gas chromatography vacuum ultraviolet spectroscopy: A review

Accelerated technological progress and increased complexity of interrogated matrices imposes a demand for fast, powerful, and resolutive analysis techniques. Gas chromatography has been for a long time a 'go-to' technique for the analysis of mixtures of volatile and semi-volatile compounds. Coupling of the several dimensions of gas chromatography separation has allowed to access a realm of improved separations in the terms of increased separation power and detection sensitivity. Especially comprehensive separations offer an insight into detailed sample composition for complex samples. Combining these advanced separation techniques with an informative detection system such as vacuum ultraviolet spectroscopy is therefore of great interest. Almost all molecules absorb the vacuum ultraviolet radiation and have distinct spectral features with compound classes exhibiting spectral signature similarities. Spectral information can be 'filtered' to extract the response in the most informative spectral ranges. Developed algorithms allow spectral mixture estimation of coeluting species. Vacuum ultraviolet detector follows Beer-Lambert law, with the possibility of calibrationless quantitation. The purpose of this article is to provide an overview of the features and specificities of gas chromatography-vacuum ultraviolet spectroscopy coupling which has gained interest since the recent introduction of a commercial vacuum ultraviolet detector. Potentials and limitations, relevant theoretical considerations, recent advances and applications are explored.