Separation of polystyrene nanoparticles with different coatings using two-dimensional off-line coupling of asymmetrical flow field flow fractionation and capillary electrophoresis

Capillary Electrophoresis as a Complementary Analytical Tool for the Separation and Detection of Nanoplastic Particles

Capillary electrophoresis (CE) is presented as a technique for the separation of polystyrene nanoparticles (NPs, particle diameters ranging from 30 to 300 nm) through a bare fused silica capillary and ultraviolet detection. The proposed strategy was also assessed for other types of nanoplastics, finding that stronger alkaline conditions, with an ammonium hydroxide buffer (7.5%, pH = 11.9), enabled the separation of poly(methyl methacrylate), polypropylene, and polyethylene NP for the first time by means of CE for particle diameters below 200 nm. Particle behavior has been investigated in terms of its effective electrophoretic mobility, showing an increasing absolute value of effective electrophoretic mobility from the smaller to the larger sizes. On the other hand, the absolute value of surface charge density decreased with increasing size of NPs. It was demonstrated and quantified that the separation mechanism was a combination of linear and nonlinear electrophoretic effects. This work is the first report on the quantification of nonlinear electrophoretic effects on nanoplastic particles in a CE system.

Emerging isolation and degradation technology of microplastics and nanoplastics in the environment

Microplastics (MPs, less than 5 mm in size) are widely distributed in surroundings in various forms and ways, and threaten ecosystems security and human health. Its environmental behavior as pollutants carrier and the after-effects exposed to MPs has been extensively exploited; whereas, current knowledge on technologies for the separation and degradation of MPs is relatively limited. It is essential to isolate MPs from surroundings and/or degrade to safe levels. This in-depth review details the origin and distribution of MPs. Provides a comprehensive summary of currently available MPs separation and degradation technologies, and discusses the mechanisms, challenges, and application prospects of these technologies. Comparison of the contribution of various separation methods to the separation of NPs and MPs. Furthermore, the latest research trends and direction in bio-degradation technology are outlooked.

Field-flow fractionation - an excellent tool for fractionation, isolation and/or purification of biomacromolecules

Field-flow fractionation (FFF) with its several variants, has developed into a mature methodology. The scope of the FFF investigations has expanded, covering both a wide range of basic studies and especially a wide range of analytical applications. Special attention of this review is given to the achievements of FFF with reference to recent applications in the fractionation, isolation, and purification of biomacromolecules, and from which especially those of (in alphabetical order) bacteria, cells, extracellular vesicles, liposomes, lipoproteins, nucleic acids, and viruses and virus-like particles. In evaluating the major approaches and trends demonstrated since 2012, the most significant biomacromolecule applications are compiled in tables. It is also evident that asymmetrical flow field-flow fractionation is by far the most dominant technique in the studies. The industry has also shown current interest in FFF and adopted it in some sophisticated fields. FFF, in combination with appropriate detectors, handles biomacromolecules in open channel in a gentle way due to the lack of shear forces and unwanted interactions caused by the stationary phase present in chromatography. In addition, in isolation and purification of biomacromolecules quite high yields can be achieved under optimal conditions.

Development of Two-Dimensional Offline Coupling of Asymmetrical Flow Field-Flow Fractionation and Capillary Electrophoresis for the Separation of a Five-Component Submicrometer Particle Mixture

Submicrometer colloidal particles are widely applied in a variety of industrial products. While precise size and surface charge control is crucial to the stability and functionality of these materials, a tool to determine these properties with sufficient resolution, detection sensitivity, and robustness is still not available. The recently reported offline coupling of asymmetrical flow field-flow fractionation and capillary electrophoresis (AF4 × CE) shows success in improving the separation resolution for nanoparticles; however, challenges remain for sensitive multiple-component submicrometer particle analysis because of wide size and mobility distributions. We here report offline coupling of an AF4 method and a CE method, which utilized the online reversed electrode polarity stacking mode, to successfully characterize a five-component, submicrometer particle mixture. The mixture was successfully separated and detected with an improved inter- and intracomponent resolution. Therefore, our developed platform holds great potential for industrial applications involving multiple-component particle mixtures.

Fluorescence coupled capillary electrophoresis as a strategy for tetrahedron DNA analysis

A strategy based on fluorescence coupled capillary electrophoresis (CE-FL) was developed for analyzing tetrahedron DNA (TD) and TD-doxorubicin (DOX) conjugate. Capillary gel electrophoresis exhibited desirable performance for separating TD and DNA strands. Under the optimized conditions, satisfactory repeatability concerning run-to-run and interday repeatability was obtained, and relative standard deviation value of resolution (n = 6) was 0.64%. Furthermore, the combination of CE and fluorescence detection provided a sensitive platform for quantifying TD concentration and calculating the damage degree of TD. The electrophoretograms indicated that CE-FL was a suitable TD assay method with high specificity and sensitivity. In addition, the application of CE-FL for TD fluorescence resonance energy transfer (FRET) research was also explored. Two types of DNA strands were utilized to interfere the formation of TD. The impact of partially complementary chain and completely complementary chain on FRET signal was explored, and the influence mechanism was discussed. After applying CE-FL for characterizing TD, we also combine CE and FRET to analyze TD-DOX conjugate. CE presented a favourable technique to monitor DOX loading and releasing processes. These noteworthy results offered a stepping stone for DNA nanomaterials assay by using CE-FL.

Asymmetric flow field-flow fractionation as a multifunctional technique for the characterization of polymeric nanocarriers

The importance of polymeric nanocarriers in the field of drug delivery is ever-increasing, and the accurate characterization of their properties is paramount to understand and predict their behavior. Asymmetric flow field-flow fractionation (AF4) is a fractionation technique that has gained considerable attention for its gentle separation conditions, broad working range, and versatility. AF4 can be hyphenated to a plurality of concentration and size detectors, thus permitting the analysis of the multifunctionality of nanomaterials. Despite this potential, the practical information that can be retrieved by AF4 and its possible applications are still rather unfamiliar to the pharmaceutical scientist. This review was conceived as a primer that clearly states the "do's and don'ts" about AF4 applied to the characterization of polymeric nanocarriers. Aside from size characterization, AF4 can be beneficial during formulation optimization, for drug loading and drug release determination and for the study of interactions among biomaterials. It will focus mainly on the advances made in the last 5 years, as well as indicating the problematics on the consensus, which have not been reached yet. Methodological recommendations for several case studies will be also included.

Recent (2018-2020) development in capillary electrophoresis

Development of new capillary electrophoresis (CE) methodology and instrumentation, as well as application of CE to solve new problems, remains an active research area because of the attractive features of CE compared to other separation techniques. In this review, we focus on the representative works about sample preconcentration, separation media or capillary coating development, detector construction, and multidimensional separation in CE, which are judiciously selected from the papers published in 2018–2020.

Separation of polystyrene nanoparticles bearing different carboxyl group densities and functional groups quantification with capillary electrophoresis and asymmetrical flow field flow fractionation

Two sets of polystyrene nanoparticles (PSNPs) with comparable core sizes but different carboxyl group densities were made and separated using asymmetric flow field flow fractionation (AF4), capillary electrophoresis (CE), and the off-line hyphenation of both methods. Our results revealed the significant potential of two-dimensional off-line AF4-CE hyphenation to improve the separation and demonstrated for the first time, the applicability of CE to determine the functional group density of nanoparticles (NPs). Compared to the result acquired with conductometric titration, the result obtained with synthesized 100 nm sized PSNPs revealed only a slight deviation of 1.7%. Commercial 100 nm sized PSNPs yielded a deviation of 4.6%. For 60 nm sized PSNPs, a larger deviation of 10.6% between both methods was observed, which is attributed to the lower separation resolution.