Graphene/multi-walled carbon nanotubes as an adsorbent for pipette-tip solid-phase extraction for the determination of 17β-estradiol in milk products

Nanocomposite microbeads made of recycled polylactic acid for the magnetic solid phase extraction of xenobiotics from human urine

Nanocomposite microbeads (average diameter = 10-100 µm) were prepared by a microemulsion-solidification method and applied to the magnetic solid-phase extraction (m-SPE) of fourteen analytes, among pesticides, drugs, and hormones, from human urine samples. The microbeads, perfectly spherical in shape to maximize the surface contact with the analytes, were composed of magnetic nanoparticles dispersed in a polylactic acid (PLA) solid bulk, decorated with multi-walled carbon nanotubes (mPLA@MWCNTs). In particular, PLA was recovered from filters of smoked electronic cigarettes after an adequate cleaning protocol. A complete morphological characterization of the microbeads was performed via Fourier-transform infrared (FTIR) spectroscopy, UV-Vis spectroscopy, thermogravimetric and differential scanning calorimetry analysis (TGA and DSC), scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The recovery study of the m-SPE procedure showed yields ≥ 64%, with the exception of 4-chloro-2-methylphenol (57%) at the lowest spike level (3 µg L-1). The method was validated according to the main FDA guidelines for the validation of bioanalytical methods. Using liquid chromatography-tandem mass spectrometry, precision and accuracy were below 11% and 15%, respectively, and detection limits of 0.1-1.8 µg L-1. Linearity was studied in the range of interest 1-15 µg L-1 with determination coefficients greater than 0.99. In light of the obtained results, the nanocomposite microbeads have proved to be a valid and sustainable alternative to traditional sorbents, offering good analytical standards and being synthetized from recycled plastic material. One of the main objectives of the current work is to provide an innovative and optimized procedure for the recycling of a plastic waste, to obtain a regular and reliable microstructure, whose application is here presented in the field of analytical chemistry. The simplicity and greenness of the method endows the procedure with a versatile applicability in different research and industrial fields.

Determination of alectinib and its active metabolite in plasma by pipette-tip solid-phase extraction using porous polydopamine graphene oxide adsorbent coupled with high-performance liquid chromatography-ultraviolet detection

Alectinib is known as an effective targeted drug, which has excellent therapeutic effect on non-small cell lung cancer and can significantly prolong the survival of patients. Therapeutic drug monitoring is necessary due to the photo-instability of alectinib and the individual differences in patients. In this work, a porous polydopamine graphene oxide composite (PDAG) was prepared by a simple surface modification method. A PDAG-based pipette-tip solid-phase extraction (PT-SPE) coupled with HPLC-UV detection was proposed for the separation and detection of alectinib and its active metabolite M4 in plasma. The method was methodologically validated and showed good linearity in the range of 50-5000 ng mL-1 (R2 > 0.9995). The limit of detection (LOD) was 4.8 ng mL-1 and 3.9 ng mL-1 for alectinib and M4, respectively, and the limit of quantitation (LOQ) was 16.1 ng mL-1 and 13.1 ng mL-1, respectively. The intra-day and inter-day precision expressed by coefficient of variation was less than 4.8 %. The recovery of this method ranged from 84.9 % to 103.5 % with a standard deviation of less than 4.3 %. In conclusion, the established method is accurate, stable and inexpensive, and can be used to monitor the levels of alectinib and M4 in plasma, which provide technical and data support for exploring optimal individualized remedial dosing regimens.

Simultaneous determination of twelve natural estrogens in dairy milk using liquid-liquid extraction and solid-phase extraction coupled with gas chromatography-mass spectrometry

There have been many analytical methods for natural estrogens in commercial dairy milk samples, but in most of which, only four major estrogens (estrone (E1), 17β-estradiol (E2), estriol (E3), and 17α-estradiol (αE2)) were included. This work developed an effective GC-MS analytical method for simultaneous analysis of twelve natural estrogens in commercial dairy milk sample, in which eight far-less well-known natural estrogens (2-hydroxyestone (2OHE1), 4-hydroxyestrone (4OHE1), 2-hydroxyestradiol (2OHE2), 4-hydroxyestradiol (4OHE2), 16-epiestriol (16epiE3), 16α-hydroxyestrone (16αOHE1), 16-ketoestradiol (16ketoE2) and 17epiestriol (17epiE3)) were included besides the four major natural estrogens. With liquid-liquid extraction and solid phase extraction, twelve natural estrogens in commercial dairy milk could be effectively extracted. The established method showed good linearity (R2 > 0.9991), low limits of detections (LODs, 0.02-0.11 ng/g), as well as excellent recoveries (64-117%) with satisfactory low relative standard deviations (RSDs, 0.8-14.7%). This established method was applied to seven commercial dairy milk samples, and all the twelve natural estrogens were frequently detected except for 4OHE2 without detection in any sample. Our results showed that the concentration contribution ratios of the eight far-less well-known natural estrogens in commercial dairy milk samples contributed to 32-83%, while the corresponding contribution ratios based on estrogen equivalence (EEQ) were 21-62%. This work highlighted the high abundance of the eight far-less well-known natural estrogens in commercial dairy milk based on both concentration and EEQ, which has been neglected for a long time.

Electrochemical Determination of 17-β-Estradiol Using a Glassy Carbon Electrode Modified with α-Fe2O3 Nanoparticles Supported on Carbon Nanotubes

In this study, a novel electrochemical assay for determining 17-β-estradiol (E2) was proposed. The approach involves modifying a glassy carbon electrode (GCE) with a nanocomposite consisting of α-Fe2O3 nanoparticles supported on carbon nanotubes (CNTs)-denoted as α-Fe2O3-CNT/GCE. The synthesis of the α-Fe2O3-CNT nanocomposite was achieved through a simple and cost-effective hydrothermal process. Morphological and chemical characterization were conducted using scanning electron microscopy (SEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDX). The presence of the α-Fe2O3-CNT film on the GCE surface resulted in an enhanced electrochemical response to E2, preventing electrode surface fouling and mitigating the decrease in peak current intensity during E2 oxidation. These outcomes substantiate the rationale behind the GCE modification. After the optimization of experimental conditions, E2 was determined by the square wave voltammetry technique using 0.1 mol L-1 KCl solution (pH = 7.0) with 20% ethanol as a supporting electrolyte. A linear concentration range of 5.0-100.0 nmol L-1 and a low limit of detection of 4.4 nmol L-1 were obtained. The electroanalytical method using α-Fe2O3-CNT/GCE was applied for E2 determination in pharmaceutical, lake water, and synthetic urine samples. The obtained results were attested by recovery tests and by high-performance liquid chromatography as a comparative technique at a 95% confidence level. Thus, the developed electrochemical sensor is simple and fast to obtain, presents high accuracy, and is viable for determining E2 in routine analysis.

Preparation of Functionalized Magnetic Polystyrene Microspheres and Their Application in Food Safety Detection

Based on the specific binding of sulfonic acid groups to melamine, β-agonists and other compounds, Fe₃O₄ nano-magnetic beads were coated with polystyrene using an improved micro-suspension emulsion polymerization method, thus forming core-shell magnetic polystyrene microspheres (Fe₃O₄@PS) with Fe₃O₄ as the core and polystyrene as the shell. These functionalized microspheres, which can be used as magnetic solid-phase extraction (MSPE) adsorbent, were prepared after further sulfonation. These microspheres were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), particle size analysis and saturation magnetization measurement. The results showed that these sulfonated magnetic polystyrene microspheres had favorable sphericity. The particle size of these microspheres ranged from 1 μm to 10 μm. Additionally, these microspheres had good dispersion and magnetic responses in both inorganic and organic solvents. Moreover, these functionalized magnetic polystyrene microspheres were tested and evaluated by high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS). The results indicated that these sulfonated magnetic polystyrene microspheres (Fe₃O₄@SPS) could effectively adsorb such illegal additives as β-agonists and melamine in the food matrix.

Self-polymerized polydopamine-imprinted layer-coated carbon dots as a fluorescent sensor for selective and sensitive detection of 17β-oestradiol

The compound 17β-oestradiol (E2) is a steroidal oestrogen used extensively in food processing and animal husbandry. As E2 is well-known as a typical endocrine disrupting chemical, its release, penetration, and exposure create serious environmental concerns. Carbon dots (CDs) have attracted great attention due to their excellent fluorescent and non-toxic properties. To help improve the selectivity of CDs, they can be combined with molecularly-imprinted polymers (MIPs). In light of the limitations involved in the fabrication of MIP layer on CDs (e.g., time consumption and low controllability of imprinted layer), the mussel inspired dopamine self-polymerization can be considered as an alternative option. As functional monomer in molecular imprinted technology, dopamine can be used efficiently to polymerize in weak alkaline condition (e.g., formation of polydopamine). In this research, a new method was developed for selective and sensitive fluorescent detection of E2 based on self-polymerization of dopamine (functional monomer) on fluorescent carbon dots (CDs@MI-PDA). The developed sensor selectively binds with E2 to quench the fluorescence intensity of CDs by photo-induced electron transfer. The sensor showcases a detection limit of E2 as 0.34 ng/mL with a linearity over 1-50 ng/mL. Furthermore, the probe was successfully applied to water (tap and river water) and milk samples with recoveries of 96.4-102.2 %. This study is expected to open a new path for the development of a simple and convenient detection approach for E2 present in complex matrices.

An electrochemical sensor modified with a molecularly imprinted polymer and carbon black for 17-β-estradiol detection

The purpose of this work was to apply an electrochemical sensor modified with a molecularly imprinted polymer (MIP) and carbon black (CB) for 17β-estradiol (E2) detection in river water samples. The synthesized MIP was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM).The modification of the electrode with the MIP and CB contributed to increased sensitivity, an increase of over 173% in relation to that of the bare electrode. The experimental parameters, amount of modifiers, pH and possible interfering species were evaluated. The method showed linearity from 0.10 to 23.0 μmol L^-1 and detection and quantification limits of 0.03 and 0.10 μmol L^-1, respectively. The application of the developed sensor was considered simple, resulting in a fast, low operating cost method, with recovery values between 103 and 105%.

High Performance Liquid Chromatography (HPLC) with Fluorescence Detection for Quantification of Steroids in Clinical, Pharmaceutical, and Environmental Samples: A Review

Steroids are compounds widely available in nature and synthesized for therapeutic and medical purposes. Although several analytical techniques are available for the quantification of steroids, their analysis is challenging due to their low levels and complex matrices of the samples. The efficiency and quick separation of the HPLC combined with the sensitivity, selectivity, simplicity, and cost-efficiency of fluorescence, make HPLC coupled to fluorescence detection (HPLC-FLD) an ideal tool for routine measurement and detection of steroids. In this review, we covered HPLC-FLD methods reported in the literature for the steroids quantification in clinical, pharmaceutical, and environmental applications, focusing on the various approaches of fluorescent derivatization. The aspects related to analytical methodology including sample preparation, derivatization reagents, and chromatographic conditions will be discussed.

Macro-microporous zeolitic imidazole framework-8/cellulose aerogel for semi-automated pipette tip solid phase extraction of fluoroquinolones in water

In this study, Zeolitic Imidazole Framework-8/cellulose aerogel (ZIF-8/CA) hybrid was successfully fabricated through a simple doping method and ZIF-8 acted as the major component for adsorption. In order to elucidate the adsorption mechanism deeply, molecular simulation was adopted to the expound the interaction modes between ZIF-8 and the fluoroquinolones (FQs). ZIF-8/CA was used as the adsorbent for semi-automated pipette tip solid phase extraction (PT-SPE). In combination with high performance liquid chromatography tandem fluorescence detector (HPLC-FLD), the established method was successfully employed to determine trace amount of FQs in water samples. Extraction parameters such as the content of ZIF-8, pH of sample solution, volume of sample, flow rate of sampling, type and volume of elution solvent were investigated. Under the optimized conditions, satisfactory linearity was achieved with the correlation coefficient (R²) ranging from 0.9954 to 0.9992. The limits of detection were in the range of 0.337-1.707 ng L^-1. And the recoveries varied from 75.9% to 96.8% with RSD less than 8.0%. The established method was demonstrated to be sensitive, efficient and convenient.

Recent advances in micro- and nanomaterial-based adsorbents for pipette-tip solid-phase extraction

There are a lot of review papers of sample pretreatment, but the comprehensive review on pipette-tip solid-phase extraction (PT-SPE) is lacking. This review (133 references) is mainly devoted to the development of different types of micro- and nanosorbent-based PT-SPE, including silica materials, carbon materials, organic polymers, molecularly imprinted polymers, and metal-organic frameworks. Each section mainly introduces and discusses the preparation methods, advantages and limitations of adsorbents, and their applications to environmental, biological, and food samples. This review also demonstrates the advantages of PT-SPE like convenience, speed, less organic solvent, and low cost. Finally, the future application and development trend of PT-SPE are prospected.

Recent Advances of Triazine-Based Materials for Adsorbent Based Extraction Techniques

This review mainly focused on the synthesis and properties of triazine-based materials as well as the state-of-the-art development of these materials in adsorption-based extraction techniques in the past 5 years, such as solid-phase extraction, magnetic solid-phase extraction, solid-phase microextraction and stir bar sorptive extraction, and the detection of various pollutants, including metal ions, drugs, estrogens, nitroaromatics, pesticides, phenols, polycyclic aromatic hydrocarbons and parabens. In the triazine-functionalized composites, triazine-based polymers and covalent triazine frameworks have been developed as the adsorbents with potential for environmental pollutants, mainly relying on the large surface area and the affinity of triazinyl groups with the targets. Triazine-based adsorbents have satisfactory sensitivity and selectivity towards different types of analytes, attributed from various mechanisms including π-π, electrostatics, hydrogen bonds, and hydrophobic and hydrophilic effects. The prospects of the materials for adsorption-based extraction were also presented, which can offer an outlook for the further development and applications.

Membrane-protected covalent organic framework fiber for direct immersion solid-phase microextraction of 17beta-estradiol in milk

17beta-estradiol (E2) could accumulate in human body through milk and cause various diseases by interfering with the endocrine system. Herein, we coated stainless steel wire with covalent organic framework LZU1 (COF-LZU1) and Nafion protected by dialysis membrane for direct immersion solid phase microextraction (DI-SPME) and coupled with gas chromatography-flame ionization detection (GC-FID) for the detection of trace E2 in milk samples. With dialysis membrane protection, the stability of SPME fiber was improved and the extraction efficiency was only reduced by 7% after repeated use of 160 times. The extraction efficiency of E2 with the home-made fiber COF-LZU1 was 22.1, 8.4, 3.6 times higher than that of bare stainless steel wire, PDMS/DVB and PDMS, respectively. The method had been successfully applied to milk samples, and the relative recoveries were between 77.27% and 108.26%. It can provide an effective and general method for the pretreatment of complex matrix samples.