Dual-vortex-assisted matrix solid-phase dispersion coupled with isotope-dilution ultrahigh-performance liquid chromatography-high resolution mass spectrometry for the rapid determination of parabens in indoor dust samples

Determination of parabens in breast milk using stir bar sorptive extraction coupled with UHPLC-UV

We developed an analytical method based on ultra-high performance liquid chromatography with UV detection, using a stir bar coated with amino/hydroxyl bifunctional microporous organic network (B-MON), for the analysis of parabens in breast milk samples. B-MON demonstrated superior performance with maximal methylparaben adsorption of 112.15 mg/g. Kinetic fitting revealed that outer diffusion was the key limiting step, and the adsorption was chemisorption. The thermodynamic analysis demonstrated that increased methylparaben adsorption was found at higher temperatures in spontaneous processes. The developed approach showed excellent linearity (R2 ≥ 0.9964) and a low detection limit (0.01 μg/L). Recoveries ranged from 85.8 to 105.5 % and the relative standard deviation was lower than 9.2 %. Based on the daily exposure assessment, these pollutants do not pose unacceptable health hazards to babies. However, the high detection frequencies (41.9%-93.5 %) suggest that breast milk still should be monitored.

High-dose exposure to butylparaben impairs thyroid ultrastructure and function in rats

Parabens (PBs) are a class of preservatives commonly used in cosmetics and pharmaceuticals. Studies have shown that these compounds may act as endocrine disruptors, affecting thyroxine levels in humans. PBs with longer chain substituents, such as butylparaben (BuP), are less prone to complete biotransformation and are therefore more likely to accumulate in the body. In this study, the effect of high-dose exposure to BuP on thyroid microstructure, ultrastructure, and function was investigated in rats. 50 mg/kg bw per day of BuP was injected subcutaneously into the neck of rats for 4 weeks. Rat thyroid weight, microstructure, and ultrastructure were determined, and the levels of thyroid sodium/iodide symporter (NIS), serum thyroid hormones, and thyroid autoantibodies were measured. The human thyroid cell line was used to study the mechanism of BuP on thyroid epithelial cells. The weight of the thyroid gland of BuP-exposed rats was increased, the structure of the thyroid follicles was irregular and damaged, the mitochondria and rough endoplasmic reticulum were swollen and damaged, and the microvilli at the tip of the epithelium were reduced and disappeared. Serum total T3, total T4, free T3, and free T4 were decreased in BuP-exposed rats, and TSH, peroxidase antibody, and thyroglobulin antibody were increased. In vitro, BuP decreased the level of NIS in thyroid epithelial cells, inhibited proliferation and viability, and induced apoptosis in a dose-dependent manner. This study demonstrated that high-dose exposure to BuP induced structural, ultrastructural, and functional impairment to the thyroid gland of rats, which may be one of the factors leading to hypothyroidism.

Effect of triclosan exposure on ovarian hormones, trace elements and growth in female rats

Triclosan (TCS) is an antibacterial compound used mainly in personal care products. Its widespread use for decades has made it one of the most widely detected compounds in environmental matrices and in biological fluids. Although it has been shown to be an endocrine disruptor in rats and aquatic species, its safe use by humans is unclear. The aim of the present study was to evaluate the effects of exposure to TCS in female rats. To this end, 14 rats were divided into two groups and fed daily as follows: the control group with sesame oil and the TCS group at a dose of 50 mg/kg/day for 28 days. Any signs of toxicity in the rats were observed daily, and the weight and phase of the estrous cycle were recorded. At the end, the rats were decapitated, the serum and ovaries were collected. The levels of testosterone and progesterone in serum were determined by immunoassay and mass spectrometry. Estradiol (in serum) and kisspeptin-10 (in serum and ovary) were measured only by immunoassays. Trace elements were determined by inductively coupled plasma-mass spectrometry (ICP-MS). The weight gain study of the rats showed a significant decrease by exposure to TCS, while the estrous cycle was not significantly affected compared to the control. The optimized methods based on mass spectrometry showed a significant decrease in the levels of progesterone and testosterone due to exposure to TCS. In addition, elements determined by ICP-MS in rat serum showed significant changes in calcium, lithium and aluminum due to TCS treatment. Finally, the kisspeptin-10 levels did not show a negative effect due to the treatment by TCS. The results suggest that medium-term exposure to TCS did not significantly alter estrous cyclicity but caused alterations in growth, sex hormone levels and some elements in the rat serum.

An overview of organic contaminants in indoor dust, their health impact, geographical distribution and recent extraction/analysis methods

People spend a substantial proportion of their time indoors; therefore, exposure to contaminants in indoor dust is persistent and profuse. According to the findings of recent studies, contaminants such as flame retardants (FRs), organochlorines (OCs), and phthalate esters (PAEs) are more prevalent in indoor dust. The discrepancy in the geographical distribution of these chemicals indicates country-specific applications. However, many studies have revealed that chlorophosphates, polychlorinated biphenyls (PCBs) and di-2-ethylhexyl phthalate are frequently detected in indoor dust throughout the world. Although some chemicals (e.g., OCs) were banned/severely restricted decades ago, they have still been detected in indoor dust. These organic contaminants have shown clear evidence of carcinogenic, neurotoxic, immunogenic, and estrogenic activities. Recent extraction methods have shown their advantages, such as high recoveries, less solvent consumption, less extraction time and simplicity of use. The latest separation techniques such as two-dimensional gas/liquid chromatography, latest ionization techniques (e.g., matrix-assisted laser desorption/ionization (MALDI)), and modern techniques of mass spectrometry (e.g., tandem mass spectrometry (MS/MS), time-of-flight (TOF) and high-resolution mass spectrometry (HRMS)) improve the detection limits, accuracy, reproducibility and simultaneous detection of organic contaminants. For future perspectives, it is suggested that the importance of the study of dust morphology for comprehensive risk analysis, introducing standard reference materials to strengthen the analytical methods, adopt common guidelines for comparison of research findings and the importance of dust analysis in the developing world since lack of records on the production and usage of hazardous substances. Such measures will help to evaluate the effectiveness of prevailing legislations and to set up new regulations.

Binary Eluent Based Vortex-Assisted Matrix Solid-Phase Dispersion for the Extraction and Determination of Multicomponent from Musk by Gas Chromatography-Mass Spectrometry

A green, flexible, and effective strategy was proposed to quantify four target compounds (muscone, ethyl palmitate, ethyl oleate, and ethylparaben) from musk by binary eluent based vortex-assisted matrix solid-phase dispersion (MSPD) extraction coupled with GC/MS. Single-factor tests and orthogonal design were employed to optimize the MSPD parameters. In addition, the binary eluent system, methanol, and ethyl acetate 3 : 7 (v/v) were used to extract the target analytes. Finally, C ₁₈ was applied as the easily available dispersant and the sample powder was ground for 2 min. Thereafter, the mixture was rapidly extracted with the binary eluents under whirling for 3 min. Eventually, the analysis of the samples was completed within 12 min by GC/MS. All correlation coefficients (r) of four targets were more than 0.9991. The recoveries of all target compounds ranged from 92.8% to 101% while their RSDs were less than 6.94%. There was no significant matrix interference for the analysis. Thus, the combination of vortex-assisted MSPD with GC/MS was considered as a novel, rapid, and environmentally friendly quantitative approach for musk samples.

Micro Salting-Out Assisted Matrix Solid-Phase Dispersion: A Simple and Fast Sample Preparation Method for the Analysis of Bisphenol Contaminants in Bee Pollen

In the present work, a novel sample preparation method, micro salting-out assisted matrix solid-phase dispersion (μ-SOA-MSPD), was developed for the determination of bisphenol A (BPA) and bisphenol B (BPB) contaminants in bee pollen. The proposed method was designed to combine two classical sample preparation methodologies, matrix solid-phase dispersion (MSPD) and homogenous liquid-liquid extraction (HLLE), to simplify and speed-up the preparation process. Parameters of μ-SOA-MSPD were systematically investigated, and results indicated the significant effect of salt and ACN-H₂O extractant on the signal response of analytes. In addition, excellent clean-up ability in removing matrix components was observed when primary secondary amine (PSA) sorbent was introduced into the blending operation. The developed method was fully validated, and the limits of detection for BPA and BPB were 20 μg/kg and 30 μg/kg, respectively. Average recoveries and precisions were ranged from 83.03% to 94.64% and 1.76% to 5.45%, respectively. This is the first report on the analysis of bisphenol contaminants in bee pollen sample, and also on the combination of MSPD and HLLE. The present method might provide a new strategy for simple and fast sample preparation of solid and semi-solid samples.

A Rapid High Throughput Vibration and Vortex-Assisted Matrix Solid Phase Dispersion for Simultaneous Extraction of Four Isoflavones for Quality Evaluation of Semen Sojae Praeparatum

Isoflavones (daidzein, daidzin, genistein and genistin) were main chemical components and usually selected as markers for quality control of Traditional Chinese Medicine semen sojae praeparatum (SSP). High throughput vibration and vortex-assisted matrix solid phase dispersion and high performance liquid chromatography with diode array detection were developed to simultaneously extract and quantify four isoflavones in SSP. Some parameters influencing extraction efficiency of isoflavones by vortex-assisted matrix solid phase dispersion such as sorbent type, ratio of sample to sorbent, crushing time, vibration frequency, methanol concentration, eluting solvent volume and vortex time were optimized. It was found that the best extraction yields of four isoflavones were obtained when the sample (20 mg) and SBA-3 (40 mg) was crushed by ball mill machine for 2 min at vibration frequency of 800 times per minute. Methanol/water (1.5 ml, 8:2, v/v) solution was dropped into the treated sample and vortexed for 3 min. The recoveries of the four isoflavones ranged from 86.1 to 94.8% and all relative standard deviations were less than 5%. A good linearity (r > 0.9994) was achieved within the range 0.5-125 μg/ml. It was concluded that the high throughput vibration and vortex-assisted matrix solid-phase dispersion coupled with high performance liquid chromatography was user-friendly extraction and quantification method of multiple isoflavones for quality evaluation of SSP.

Optimization of double-vortex-assisted matrix solid-phase dispersion for the rapid determination of paraben preservative residues in leafy vegetables

The extensive use of preservatives during the growth, transport and storage of vegetables has been a concern because of their known or suspected toxicity that jeopardizes human health. This paper reports the development of a technique that rapidly determines the presence of five paraben preservative residues in leafy vegetables using double-vortex-assisted matrix solid-phase dispersion (DVA-MSPD) and UHPLC-electrospray ionization(-)-quadrupole time-of-flight mass spectrometry detection. We simplified the original MSPD technique by eliminating the use of mortar/pestle and SPE-column procedures. The DVA-MSPD factors were screened by a multilevel categorical design, and then optimized by Box-Behnken Design plus response surface methodology. The limits of quantification were 1.2-1.8 ng g-1 (dry weight). The satisfactory average recoveries were 85-104% with RSDs less than 10%. The developed method was successfully employed for the rapid determination of selected paraben residues at trace-level in leafy vegetable samples.