Robotic-assisted dynamic large drop microextraction

Modern automated microextraction procedures for bioanalytical, environmental, and food analyses

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.

Three-Dimensional Printed Microdevice to Enhance Headspace Microextraction for Enrichment of Histamine in Milk

In this work, a three-dimensional (3D) printed microdevice was designed to fix a drop of extractant that was applied to the enrichment of the most toxic biogenic amine, histamine, by headspace single-drop microextraction (HS-SDME). Concomitantly, based on the hybridization chain reaction of the histamine aptamer isothermal nucleic acid amplification strategy, a new fluorescence sensing method was developed to realize the highly sensitive detection of histamine. This is the first application of a 3D-printed microdevice to realize the HS-SDME process, which, among other advantages, effectively solves the problem of unstable and variable drop volumes that can plague traditional SDME and ensures the accuracy and repeatability of the extraction process. The calibration linear range of this SDME-fluorescence method was from 10 pM to 5 μM (R² > 0.98), and the limit of detection was as low as 3 pM. In addition, the method was successfully demonstrated to determine histamine spiked in milk, with recoveries of between 93% and 104%, and relative standard deviations of less than 5%. The method established in this study has important practical significance for food safety monitoring and human health and provides new ideas and solutions for the design and application of biosensors.

Lab-In-Syringe automation of deep eutectic solvent-based direct immersion single drop microextraction coupled online to high-performance liquid chromatography for the determination of fluoroquinolones

Lab-In-Syringe direct immersion single drop microextraction is proposed as an automated sample pretreatment methodology and coupled online to HPLC with fluorescence detection for the determination of fluoroquinolones in environmental waters. For the first time, a drop of a natural deep eutectic solvent (NADES), synthesized from hexanoic acid and thymol, has been used as an extractant in automated single-drop microextraction. The extraction procedure was carried out within the 5 mL void of an automatic syringe pump. A 9-position head valve served the aspiration of all required solutions, air, waste disposal, and hyphenation with the HPLC instrument. Sample mixing during extraction was done by a magnetic stirring bar placed inside the syringe. Only 60 μL of NADES were required omitting toxic classical solvents and improving the greenness of the proposed methodology. By direct injection, linear working ranges between 0.1 and 5 μg L^-1 were achieved for all fluoroquinolones. The limit of quantification values and enrichment factors ranged from 20 ng L^-1 to 30 ng L^-1 and 35 to 45, respectively. Accuracies obtained from the analysis of spiked surface water and wastewater treatment plant effluent analysis at two concentration levels (0.5 and 4 μg L^-1) ranged from 84.6% to 119.7%, with RSD values typically <3%.

Single-drop microextraction technique for the determination of antibiotics in environmental water

Growing concerns related to antibiotic residues in environmental water have encouraged the development of rapid, sensitive, and accurate analytical methods. Single-drop microextraction has been recognized as an efficient approach for the isolation and preconcentration of several analytes from a complex sample matrix. Thus, single-drop microextraction techniques are cost-effective and less harmful to the environment, subscribing to green analytical chemistry principles. Herein, an overview and the current advances in single-drop microextraction for the determination of antibiotics in environmental water are presented were included. In particular, two main approaches used to perform single-drop microextraction (direct immersion-single-drop microextraction and headspace-single-drop microextraction) are reviewed. Furthermore, the impressive analytical features and future perspectives of single-drop microextraction are discussed in this review. This article is protected by copyright. All rights reserved.

Development of a Surface-Enhanced Raman Spectroscopic Methodology to Detect Immobilized Organic Materials in Biogeological Contexts

The likelihood of finding intact cellular structures on the surface or in the near subsurface of the martian regolith is slim, due in part to the intense bombardment of the surface by ionizing radiation from outer space. Given that this radiation is predicted to be so intense that it would render a living cell inactive within minutes, it is logical to search for evidence of microbial life by looking for molecules produced by the breakdown of cellular matter. This "pool" of molecules, known as biomarkers, consists of a range of species with various functionalities that make them likely to interact with minerals in the martian regolith. Raman spectroscopy, a molecularly specific analysis method utilized for detecting organic biomarkers among inorganic geomaterials, suffers from low signal intensity when the concentration of organics is as low as it appears to be on the martian surface. This article describes the utility of a surface-enhanced Raman spectroscopy (SERS) method used to detect extremely low levels of biomarkers that were passively adhered to mineral surfaces in a method that represents how this interaction would take place in a natural environment on Mars. The methodology showed promise for the detection of multiple classes of biomarkers.

Low-cost and open-source strategies for chemical separations

In recent years, a trend toward utilizing open access resources for laboratory research has begun. Open-source design strategies for scientific hardware rely upon the use of widely available parts, especially those that can be directly printed using additive manufacturing techniques and electronic components that can be connected to low-cost microcontrollers. Open-source software eliminates the need for expensive commercial licenses and provides the opportunity to design programs for specific needs. In this review, the impact of the "open-source movement" within the field of chemical separations is described, primarily through a comprehensive look at research in this area over the past five years. Topics that are covered include general laboratory equipment, sample preparation techniques, separations-based analysis, detection strategies, electronic system control, and software for data processing. Remaining hurdles and possible opportunities for further adoption of open-source approaches in the context of these separations-related topics are also discussed.

Automated needle-sleeve based online hyphenation of solid-phase microextraction and liquid chromatography

A novel approach for the online coupling of solid-phase microextraction (SPME) and liquid chromatography (LC) is introduced. An innovative Si@GO@βCD coated needle-sleeve extractant device was developed and then employed in the automated online SPME-LC-UV determination of estrogen-like isoflavones from human urine samples. The extractant SPME device is easily attachable at the endpoint of an analytical syringe needle and operated by a lab-made autosampler. Fully automated online SPME-LC is accomplished by proper autosampler programming to perform the following steps: i) the analytes extraction by direct immersion of the extractant device into the stirred sample, ii) a rinsing step iii) the analytes desorption/enrichment, iv) the online transference of the extract to the LC injection valve. Besides allowing the online SPME hyphenation, this extraction modality efficiently addressed the drawbacks associated with the clogging and dispersion of graphene-based microextraction techniques performed in packed-bed and dispersive formats. The main extraction parameters and the performance of the automated online SPME-LC method developed were carefully studied. The results show a good sensitivity, reliability, and straightforward analytical strategy for the determination of organic compounds in complex samples. The detection limit of the method was 20 μg L¹ for DAI and 10 μg L^-1 for GEN, FOR and BIO. The intra-day RSD was below 10% and inter-day RSD was below 13%. The total analysis time was less than 17 min per sample.

Elevating Chemistry Research with a Modern Electronics Toolkit

With the rapid development of high technology, chemical science is not as it used to be a century ago. Many chemists acquire and utilize skills that are well beyond the traditional definition of chemistry. The digital age has transformed chemistry laboratories. One aspect of this transformation is the progressing implementation of electronics and computer science in chemistry research. In the past decade, numerous chemistry-oriented studies have benefited from the implementation of electronic modules, including microcontroller boards (MCBs), single-board computers (SBCs), professional grade control and data acquisition systems, as well as field-programmable gate arrays (FPGAs). In particular, MCBs and SBCs provide good value for money. The application areas for electronic modules in chemistry research include construction of simple detection systems based on spectrophotometry and spectrofluorometry principles, customizing laboratory devices for automation of common laboratory practices, control of reaction systems (batch- and flow-based), extraction systems, chromatographic and electrophoretic systems, microfluidic systems (classical and nonclassical), custom-built polymerase chain reaction devices, gas-phase analyte detection systems, chemical robots and drones, construction of FPGA-based imaging systems, and the Internet-of-Chemical-Things. The technology is easy to handle, and many chemists have managed to train themselves in its implementation. The only major obstacle in its implementation is probably one's imagination.