Mesoporous structured molecularly imprinted polymer with restricted access function for highly selective extraction of chlorpyrifos from soil

Selective extraction and determination of chlorpyrifos residues from aqueous samples using biochar-functionalized molecularly imprinted polymer combined with high-performance liquid chromatography

The concentration of chlorpyrifos (CPF) in aqueous samples was determined using a novel molecularly imprinted dispersive solid-phase extraction (MISPE) approach that was presented in this research. Using a non-covalent molecular imprinting technique, a biochar (BC)-functionalized molecularly imprinted polymers (MIPs) (BC-MIPs) was created. These MIPs were used in dispersive solid-phase extraction (DSPE) in conjunction with high-performance liquid chromatography with photodiode array detection (HPLC-PDA) to detect CPF in aqueous samples with high sensitivity. Using methacrylic acid (MAA) as the monomer and ethylene glycol dimethacrylate (EGDMA) as the cross-linker, BC-MIPs were created using CPF as a template. By using the suggested dispersive solid-phase extraction (DSPE) approach, the efficiency of the synthesized BC-MIPs granules was evaluated. Analytical performance of the devised DSPE-HPLC-PDA technique was assessed under optimal settings. The optimized parameters included extraction time, aqueous sample pH, desorption time and desorption reagents. Compared with the traditional method, the established method has better selective adsorption capacity, reusability and sensitivity for CPF. The suggested method presented that limit of detection and limit of quantification were 1.0 ng/mL and 4.0 ng/mL, along with excellent linear range (4.0-1500 ng/mL) with coefficients of determination (R2=0.9982). The established method was successfully used to determination CPF in aqueous samples from the Baisha River in Qingdao, with the advantages of accuracy (recoveries: 81.2 %-103.6 %, RSDs≤9.2 %), speed (CPF-BC-MIPs-DSPE time: 75 min; HPLC-PDA time: 12 min), selectivity (imprinting factor: 4.24), and economy (50 mg of adsorbent synthesized using cheap straw and 1 mL of solvents), which partially conform to the current advanced principle of "3S+2A" in analytical chemistry. The BC-MIPs granules shown potential for CPF preconcentration in complicated samples and were effective carriers for the selective adsorption of CPF.

Approaching a discussion on the detachment of chlorpyrifos in contaminated water using different leaves and peels as bio adsorbents

The emerging contaminant chlorpyrifos, an insecticide, is generally used in agricultural fields to control termites, ants, and mosquitoes for the proper growth of feed and food crops. Chlorpyrifos reaches water sources for multiple reasons, and people who use water from nearby sources is exposed to chlorpyrifos. Due to its overuse in modern agriculture, the level of chlorpyrifos in water has drastically grown. The present study aims to address the problem arising from the utilization of chlorpyrifos-contaminated water. Natural bioadsorbents Bael, Cauliflower, Guava leaves Watermelon, and lemon peel were employed to remove chlorpyrifos from contaminated water under specific conditions of various factors, such as initial adsorbate concentration, dose of bioadsorbent, contact time, pH, and temperature. Maximum removal efficiency of 77% was obtained with lemon peel. The maximum adsorption capacity (qe) was 6.37 mg g^-1. The kinetic experiments revealed that the pseudo second order model (R² = 0.997) provided a better explanation of the mechanism of sorption. The isotherm showed that chlorpyrifos adsorbed in lemon peel in a monolayer and was best suited by the Langmuir model (R² = 0.993). The adsorption process was exothermic and spontaneous, according to thermodynamic data.

Highly Efficient Selective Extraction of Chlorpyrifos Residues from Apples by Magnetic Microporous Molecularly Imprinted Polymer Prepared by Reversible Addition-Fragmentation Chain Transfer Surface Polymerization

Chlorpyrifos, as a moderate toxic organophosphorus pesticide, is prone to lingering in the environment and cannot be monitored easily. In this study, a magnetic, microporous, molecularly imprinted polymer was synthesized by using the reversible addition-fragmentation chain transfer polymerization method. The synthesized materials were properly characterized in terms of morphology, selectivity, and sorption capacity and used as sorbents for magnetic solid phase extraction for the selective determination of chlorpyrifos in apple samples. Results showed that the magnetic microporous molecularly imprinted materials were rough and porous spheres at an average size of 5 nm. The materials were highly selective toward chlorpyrifos with a superior sorption capacity of 167.99 mg·g^-1 and were resistant to the interference of competitive pollutants. After optimization, the recoveries of chlorpyrifos reached 96.2-106.5%, and the detection limit was 0.028 μg·kg^-1 by HPLC. Based on these analytical validation results, the developed method could be effective at determining chlorpyrifos in apples.

Recent advances of ordered mesoporous silica materials for solid-phase extraction

This review mainly focuses on the development and application of ordered mesoporous silica materials for solid-phase extraction in recent years. It overviews not only bare mesoporous silica but also the functionalized mesoporous silica with organic groups, molecularly imprinted polymers, and magnetic materials. These mesoporous silica materials were used as the extraction adsorbents in cartridge solid-phase extraction, dispersive solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction and matrix solid phase dispersion. Coupled with atomic emission spectrometry, chromatography or other detection methods, these techniques efficiently extracted and sensitively determined various targets, such as metal ions, perfluorocarboxylic acids, pesticides, drugs, endocrine disruptors, phenols, flavanones, polycyclic aromatic hydrocarbons, parabens and so on. Based on unique advantages of mesoporous silica materials, the developed analytical method successfully analyzed different matrix samples, like environmental water samples, soil samples, food samples, biological samples and cosmetics. In addition, the prospects of these materials in solid-phase extraction are presented, which can offer an outlook for the further development and applications.

A hollow visible-light-responsive surface molecularly imprinted polymer for the detection of chlorpyrifos in vegetables and fruits

A visible-light-responsive azobenzene derivative, 3,5-dichloro-4-((2,6-dichloro-4-(methacryloyloxy)phenyl)diazenyl)benzoic acid, was synthesized and used as the functional monomer to fabricate a visible-light-responsive core-shell structured surface molecularly imprinted polymer (PS-co-PMAA@VSMIP). After removal of the sacrificial PS-co-PMAA core, a hollow structured surface molecularly imprinted polymer (HVSMIP) was obtained. Both the PS-co-PMAA@VSMIP and HVSMIP were used for the detection of chlorpyrifos, a moderately toxic organophosphate pesticide. They exhibited good visible-light-responsive properties (550 nm for trans→cis and 440 nm for cis→trans isomerization for an azobenzene chromophore) in ethanol/water (9:1, v/v). Compared with the PS-co-PMAA@VSMIP, the HVSMIP had a larger surface area, pore volume, binding capacity, imprinting effect, maximum chemical binding capacity, dissociation constant, and photo-isomerization rate. The HVSMIP was applied to detect trace chlorpyrifos in fruit and vegetable samples. This was achieved by measuring the trans→cis rate constant of the HVSMIP in the sample solution, with good recoveries, low relative standard deviations, and a low detection limit.

Recent advances and applications of molecularly imprinted polymers in solid-phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid-phase extraction is arguably the most frequently used one. However, the majority of available solid-phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor-made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid-phase extraction, and therefore molecularly imprinted polymer-based solid-phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer-based solid-phase extraction for determination of different analytes in complicated real samples during the 2015-2020 are reviewed systematically, including the solid-phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid-phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer-based solid-phase extraction for real sample analysis are discussed.

Restricted Access Molecularly Imprinted Polymers

The use of conventional molecularly imprinted polymers (MIPs) for biological sample preparation is a difficult procedure due to the presence of high concentrations of proteins which can obstruct the selective binding sites, decrease the adsorption capacity, and compromise the analytical validation. In this way, modifications of conventional MIPs have been carried out in order to give them the ability to exclude macromolecules. Superficial coverings with hydrophilic groups and/or proteins have been the main procedures to obtain these restricted access molecularly imprinted polymers (RAMIPs ). These materials have been efficiently used for the selective extraction of small molecules from untreated complex matrices (e.g., blood, plasma, serum, and milk), without the need of a pre-deproteinization step. In this chapter, we describe a generic synthesis protocol to obtain RAMIPs as well as the assays to evaluate the protein exclusion efficiency and possible applications in offline and online procedures.